Philips HP4887 User manual

Register your product and get support at
www.philips.com/welcome Hairdryer
HP4887
HP4886
EN User manual

English
Congratulations on your purchase, and welcome to Philips! To fully
benet from the support that Philips offers, register your product at
www.philips.com/welcome.
1 Important
Read this user manual carefully before you use the appliance and keep it
for future reference.
WARNING: Do not use this appliance near water.
•
When the appliance is used in a bathroom, unplug it after use since• the proximity of water presents a risk, even when the appliance is
switched off.
WARNING: Do not use this appliance near bathtubs,
• showers, basins or other vessels containing water.
• Do not insert metal objects into the air grilles to avoid
electric shock.
Never block the air grilles.
•
Before you connect the appliance, ensure that the voltage indicated• on the appliance corresponds to the local power voltage.
Do not use the appliance for any other purpose than described in
• this manual.
Do not use the appliance on articial hair.
•
When the appliance is connected to the power, never leave it• unattended.
Always unplug the appliance after use.
•
Never use any accessories or parts from other manufacturers or that• Philips does not specically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
Do not wind the mains cord round the appliance.
•
If the mains cord is damaged, you must have it replaced by Philips, a• service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.

This appliance is not intended for use by persons (including children)• with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with
• the appliance.
For additional protection, we advise you to install a residual current
• device (RCD) in the electrical circuit that supplies the bathroom.This
RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
If the appliance overheats, it switches off automatically. Unplug the
• appliance and let it cool down for a few minutes. Before you switch
the appliance on again, check the grilles to make sure they are not
blocked by uff, hair, etc.
Electromagnetic elds (EMF)
This appliance complies with all standards regarding electromagnetic
elds (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientic evidence
available today.
Environment
Do not throw away the appliance with the normal household
waste at the end of its life, but hand it in at an ofcial collection
point for recycling. By doing this, you help to preserve the
environment.
2 Guarantee and service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you nd its phone number in the worldwide
guarantee leaet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.

3 Dry your hair
1Connect the plug to a power supply socket.
For precise drying, attach the concentrator (
• ) onto the hairdryer ( ).
• HP4887 only: For volume, bounce and additional shine, attach the
Comb diffuser ( ) onto the hairdryer ( ).
To disconnect the attachment, pull it off the hairdryer.
•
2Adjust the temperature switch ( ) to Quick-Dry setting to dry
shower-wet hair quickly, Thermoprotect setting to gently dry the
hair at a constant temperature of 57°C, or Cool Care setting to
dry the hair with care and seal in shine.
Press the Cool Shot button (
• ) for cool airow to x your style.
Press the ion button (
• ) to switch on the ion function.The function
provides additional shine and reduces frizz. It is particularly suitable
for dry and almost-dry hair.
If the function is on, the ion indicator lights up.
•
When the function is on, a special odor may be smelt. It is normal• and caused by the ions which are generated.
• For HP4887 with the Comb diffuser: Insert the pins into your hair,
and direct the airow from the root to the end.
3 Adjust the airow switch ( ) to for gentle airow and styling,
for strong airow, or to switch off.
After use:
1Switch off the appliance and unplug it.
2Place it on a heat-resistant surface until it cools down.
3Clean the appliance by damp cloth.
4Keep it in a safe and dry place, free of dust.You can also hang it with
the hanging loop ( ).

4 Troubleshooting
Problem Cause Solution
The appliance
does not work
at all.
The power socket to
which the appliance
has been connected
may not live.
Ensure the socket is live.
The appliance may
have overheated and
switched itself off.
Unplug the appliance and
let it cool down for a few
minutes. Before you switch
on the appliance again, check
the grilles to make sure they
are not blocked by uff,
hair, etc.
The appliance may
not be suitable for the
voltage to which it has
been connected.
Ensure that the voltage
indicated on the type plate of
the appliance corresponds to
the local power voltage.

© Royal Philips Electronics N.V. 2009
All rights reserved.
Specications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
PDCC-2009
3140 035 20431