Philips Essence HR7752 Manual

Essence HR7752
Recipes & Directions for use
Przepisy i instrukcja obsługi
Reţete şi Instrucţiuni de utilizare
Рецепты и Инструкции по эксплуатации
Recepty & Návod k použití
Recepti in navodila za uporabo
Рецепти та інструкції з використання
приладу
All manuals and user guides at all-guides.com
all-guides.com

2
All manuals and user guides at all-guides.com

B
D
C
E
F
G
H
I
K
L
M
N
J
A
P
R
QY
X
V
W
T
U
O
Z
S
3
All manuals and user guides at all-guides.com

4
All manuals and user guides at all-guides.com

ENGLISH 6
POLSKI 22
ROMÂNĂ 38
РУССКИЙ 54
ČE KY 73
MAGYAR 88
LOVEN KY 104
УКРАЇНС КІЙ 120
HR7752
5
All manuals and user guides at all-guides.com

ENGLISH6
Parts and accessories
AMotor unit
BSpeed control
P = Pulse
0 = Off
1 = Lowest speed
2 = Highest speed
CScrew cap (must be placed to use bowl
functions)
DFood processing bowl
ETool holder
FLid of food processing bowl
GFeed tube
HPusher
IKneading hook
JMetal blade + protective cover
KSlicing insert medium
LShredding insert medium
MInsert holder
NEmulsifying disc
OGear housing meat mincer
PCutter housing meat mincer
QWormshaft
RCutter unit
SScrew ring
TMedium grinding disc,4 mm dia.
UCoarse grinding disc, 8 mm dia.
VSeparator
WSausage horn
XTray
YPusher
ZRelease lever
Introduction
This appliance is equipped with an automatic
thermal cut-out system.This system will
automatically cut off the power supply to the
appliance in case of overheating.
If your appliance suddenly stops
running:
1Pull the mains plug out of the socket.
2Turn the knob to position 0 to switch the
appliance off.
3Let the appliance cool down for
60 minutes.
4Put the mains plug in the socket.
5Switch the appliance on again.
Please contact your Philips dealer or an
authorised Philips service centre if the automatic
thermal cut-out system is activated too often.
CAUTION:In order to avoid a hazardous
situation,this appliance must never be connected
to a timer switch.
All manuals and user guides at all-guides.com
all-guides.com

ENGLISH 7
Important
◗Read these instructions for use carefully and
look at the illustrations before using the
appliance.
◗Keep these instructions for use for future
reference.
◗Check if the voltage indicated on the
appliance corresponds to the local mains
voltage before you connect the appliance.
◗Never use any accessories or parts from
other manufacturers or that have not been
specifically advised by Philips.Your guarantee
will become invalid if such accessories or
parts have been used.
◗Do not use the appliance if the mains cord,
the plug or other parts are damaged.
◗If the mains cord of this appliance is damaged,
it must always be replaced by Philips or a
service centre authorised by Philips,in order
to avoid hazardous situations.
◗Thoroughly clean the parts that will come
into contact with food before you use the
appliance for the first time.
◗Do not exceed the quantities and preparation
times indicated in the table.
◗Do not exceed the maximum content
indicated on the bowl,i.e.do not fill beyond
the top graduation.
◗Unplug the appliance immediately after use.
◗Never use your fingers or an object (e.g.a
spatula) to push ingredients down the feed
tube while the appliance is running.Only the
pusher is to be used for this purpose.
◗Keep the appliance out of the reach of children.
◗Never let the appliance run unattended.
◗Place the lid on the bowl in the right position.
The build-in safety lock will now be deblocked
and you will be able to turn the appliance on.
◗Switch the appliance off before detaching any
accessory.
◗Always switch the appliance off by switching
to speed setting 0.
◗Wait until moving parts have stopped running
before you remove the lid of the appliance.
◗Never immerse the motor unit in water or
any other fluid,nor rinse it under the tap.Use
only a moist cloth to clean the motor unit.
◗Remove the protective cover from the blade
before use.
◗Never use the cutter unit in combination with
the separator and sausage horn.
◗Do not attempt to grind bones,nuts or other
hard items.
◗Never reach into the tray. Always use the
pusher.
◗Let hot ingredients cool down before
processing them (max.temperature
80cC/175cF).
◗For application times,please refer to the
tables further in these instructions for use.
◗Unplug the appliance immediately after use.
All manuals and user guides at all-guides.com

ENGLISH8
Using the appliance
Food processing bowl
C1Mount the bowl on the food processor by
turning the handle in the direction of the
arrow until you hear a click.
C2Put the lid on the bowl.Turn the lid in the
direction of the arrow until you hear a
click (this requires some force).
Built-in safety lock
The motor unit,the bowl and the lid have been
provided with marks.The appliance will only
function if the dot on the motor unit is placed
directly opposite the dot on the bowl.
C1Make sure that the line on the lid and the
line on the bowl are directly opposite each
other.The projection of the lid will
complete the shape of the handgrip.
1
CLICK 2
12
CLICK
CLICK
Feed tube and pusher
C1Use the feed tube to add liquid and/or
solid ingredients.Use the pusher to push
solid ingredients through the feed tube.
C2You can also use the pusher to close the
feed tube in order to prevent ingredients
from escaping through the feed tube.
Metal blade
◗The metal blade can be used for chopping,
mixing,blending and pureeing.
C1Remove the protective cover from the
blade.
The cutting edges of the blade are very sharp.
Avoid touching them!
C2Put the tool holder in the bowl and the
blade on the tool holder that stands in the
bowl.
3Put the ingredients in the bowl.Pre-cut
large pieces of food into pieces of approx.
3 x 3 x 3 cm.Put the lid on the bowl.
4Put the pusher in the feed tube.
All manuals and user guides at all-guides.com

ENGLISH 9
C5Select the maximum speed (position 2) on
the speed control.
- The process will continue until switched to
position 0 (off).
◗Switch to position 1 to decrease the speed.
Tips
◗If you chop onions,use the pulse function
several times to prevent them from becoming
too finely chopped.
◗Do not let the appliance run too long when
you are chopping (hard) cheese.The cheese
will become too hot,will start to melt and
will turn lumpy.
◗Do not use the blade to chop very hard
ingredients like coffee beans,turmeric,nutmeg
and ice cubes,as this may cause the blade to
get blunt.
If food sticks to the blade or to the inside of the
bowl:
1Turn the appliance off.
2Remove the lid from the bowl.
3Remove the ingredients from the blade or
from the wall of the bowl with a spatula.
Inserts
Never process hard ingredients like ice cubes
with the inserts.
C1Put the selected insert in the insert holder
before you place it onto the toolholder.
Cutting edges are very sharp. Avoid touching
them!
C2Place the insert holder onto the tool
holder that stands in the bowl.
3Put the lid on the bowl.
4Put the ingredients in the feed tube.Pre-
cut large chunks to make them fit into the
feed tube.
C5Fill the feed tube evenly for the best
results.
When you have to cut large amounts of food,
process only small batches at a time and empty
the bowl regularly between the batches.
C6For shredding and slicing,select the
maximum speed (position 2) on the speed
control.
The process will continue until switched to
position 0 (off).
◗Switch to position 1 to decrease the speed.
1
2
CLICK
All manuals and user guides at all-guides.com

ENGLISH10
C7Press the pusher lightly onto the
ingredients in the feed tube.
◗If you are shredding soft vegetables or fruits,
you can decrease the speed to position 1,to
prevent the shredded vegetables and fruits
from turning into puree.
C8To remove the insert from the insert
holder,take the insert holder in your
hands with its back pointing towards you.
Push the edges of the insert with your
thumbs to make the insert fall out of the
holder.
Kneading hook
The kneading hook can be used for kneading
bread dough and for mixing batters and cake
mixtures.
C1Put the bowl on the motor unit and place
the kneading accessory onto the driving
shaft.
2Put the ingredients in the bowl and fasten
the lid onto the bowl.Place the pusher in
the feed tube to prevent ingredients from
splattering during the kneading process.
C3Select the maximum speed (position 2) on
the speed control.
Emulsifying disc
You can use the emulsifying disc to prepare
mayonnaise,to whip cream and to whisk egg
whites.
C1Put the emulsifying disc onto the tool
holder that stands in the bowl.
2Put the ingredients in the bowl and put the
lid on the bowl.
3Select the minimum speed (position 1) to
obtain optimal results.
Tips
◗When you want to whisk egg whites,make
sure the eggs are at room temperature.
◗Take the eggs out of the refrigerator at least
half an hour before you are going to use
them.
◗All the ingredients for making mayonnaise
must be at room temperature.
Oil can be added through the small hole in the
bottom of the pusher.
◗If you are going to whip cream,the cream
must be taken straight from the refrigerator.
Please observe the preparation time in the
table.Cream should not be whipped too long.
Use the pulse function to have more control over
the process.
All manuals and user guides at all-guides.com