Philips Streamium WAS7000 Quick start guide

WAS7000
Connect to your PC
Connect Philips Wireless Music Station to your PC if you want to do
the following:
●Access music files stored on your PC from Philips Music Station’s
UPnP source
●Upgrade firmware of Philips Music Station
REC MARK/UNMARK
DBB
SEARCHCD/MP3-CD HD SOURCE
SOURCE
To connect to Philips Music Station, your minimum PC requirements must be:
UPnP playback
●Windows 2000/XP (Home or Professional)
●Pentium III 500MHz processor or higher
●256MB RAM
●CD-ROM Drive
●Ethernet Adapter (for wired connection)/ Wireless
Network Adaptor 802.11 b/g (for wireless connection)
●Free hard disk space of 500MB
●Windows Media Player® 9.0 or later installed
Wireless Music Station
Eng

Set up a wired connection
A1
Connect the Station to PC directly with the supplied (orange)
Ethernet cable
OR
Connect the Station directly to Access Point with the supplied
(orange) Ethernet cable
Tips:
●Make sure that Ethernet port on your PC is 'Enabled' to make WADM
connection.
ETHERNET
LAN

Set up a wireless connection
PC StationAccess Point PC Station
A2
On Station :
●Press the MENU button
●Select Settings>Network >
Wireless > (Select desired net-
work) >
(Input the encryption key by
using the 1way remote con-
trol) > Automatic > Apply
Settings > Yes
Do you have a wireless Access Point?
YES NO
a. On Station :
●Press SOURCE to enter
UPnP mode
●Press MENU, select
Information >Wireless> SSID
> (write down SSID code)
●Press MENU, select
Information >Wireless> WEB
Key > (write down WEB key)
b. On PC :
●Select Start > Control Panel >
Network Connections >
Enable Wireless Network
Connections > View Available
Wireless Networks > Select
the network that matches
Station's SSID > Input
retrieved Station’s WEP key
Tips:
●Check that PC’s wireless network adaptor is enabled.
●Locate the Station closer to your wireless Access Point.
●Make sure that DHCP is enabled on your wireless Access Point.
If not available, choose Static and key in IP configuration

B1
Install and launch WADM
Insert PC Suite CD into PC
Select desired language and accept license terms
Select ‘WADM’ and select ‘Next’ to start installation
To launch WADM, double click the desktop icon
A list of found Center/ Station appears
Select desired Station, and then click Connect now
1
2
3
4
5
Tips:
●Log onto your PC with administrator's privileges enabled.
●If Station’s IP configuration is not in the default range (Subnet mask: 255.255.0.0;
IP address: 172.31.x.x). Select Connection Wizard >Custom Mode. Input
Station’s current IP configuration as prompted. Press the MENU button and
select Information >Ethernet to check IP configuration.
●For Windows®XP SP2 users, make sure your Windows Firewall has been
turned off by clicking Start >Control Panel >Security Center >
Windows Firewall >Off (Visit www.microsoft.com for more details).
●If some of the WADM functions cannot be used, it might be because
your anti-virus software blocked them. It is recommended to turn off
your anti-virus software temporarily.
●When WADM is running, Internet access may be disabled. Close WADM to
restore access.
●If your PC operation system is Windows Vista, please right click on
WADM, select Properties --> Compatibility, and make sure the
check-box under "Compatibility mode" and "Privilege level" is marked,
then click OK. Otherwise your WADM may not able to be launched.

B2
Install and launch WADM
If desired Station is not found :
●Wired connection: Select Connection Wizard >
Express mode>Next to build new connection
Note: If you selected Connection Wizard >Custom mode,
it will select Wireless network adaptor automatically by
default if the PC has both wired and wireless adapter.
Please select Wired network adaptor manually.
●Wireless connection: Check that wireless Access Point is
broadcasting preferred wireless network SSID AND that PC’s
wireless network adaptor is working

C1
Use WADM
In the sub-menu of Device configuration, you can see System
information, manage the Network settings, upgrade Firmware,
and to view the device's connection with external network.
For details on how to upgrade firmware, see User Manual:
Firmware upgrade

Check you have installed Philips
Media Manager (PMM) on PC
To launch PMM, double click the
desktop icon if it is created
The first time you launch PMM,click Add Music >Add Files or
Folders to specify music folders on your PC
Station:
Press SOURCE, and then
select preferred music server
1
2
3
4
Use UPnP
C2
REC MARK/UNMARK
DBB
SEARCHCD/MP3-CD HD SOURCE
SOURCE
Tips:
●UPnP device may not necessarily be a PC but any content serving
device.
●If UPnP device is not detected after 5 minutes, powering it off and
on again might re-establish a faster connection.

Specifications are subject to change without notice.
Trademarks aree the property of Koninklijke Philips Electronics N.V. or their respective owners.
© Royal Philips Electronics N.V. 2006
All rights reserved.
www.philips.com
CountryCountry HelpdeskHelpdesk Tariff / minTariff / min Keep readyKeep ready
0820 901115
070 253 010
3525 8761
09 2290 1908
08 9165 0006
0180 5 007 532
0 0800 3122 1223
01 601 1161
199 404 042
26 84 30 00
0900 0400 063
2270 8250
2 1359 1440
902 888 785
08 632 0016
02 2310 2116
0906 1010 017
Need help?
Online help: www.philips.com/support
Contact line: 1 800 531 0039
Gracenote and are registered trademarks of Gracenote.The Gracenote logo and
logotype, and the “Powered by Gracenote” logo are trademarks of Gracenote.
3141 075 22051 Eng