Philips RI7200/00 User manual

Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
ServiceManual
Philips Consumer Lifestyle Version A
Stand and Bowl Mixer
RI7200/00
RI7200/01
HR7200/00
HR1576/00
12/11
PRODUCT INFORMATION
Safety
• This product meets the requirements regarding
interference suppression on radio and TV.
• After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
• Voltage : 220 V
• Frequency : 50 Hz - 60 Hz
• Power : 400 W
• Cord length : 1,25 m
• Colour appliance : White
• Motor : Serles wound
Statically and dynamically
balanced
Self lubricated
• Transmission ratio
between rotor spindle
and gearwheel : 21½ : 1
• Speeds beaters : Switch position 1 - 545 rpm
Switch position 2 - 600 rpm
Switch position 3 - 710 rpm
Switch position 4 - 810 rpm
Switch position 5 - 900 rpm
Turbo position - 1010 rpm
Dimensions
• Length : 350 mm
• Width : 370 mm
• Height : 165 mm, 370 mm (incl. Mixer)
• Weight : 1660 g (without Beaters)

2-5
RI7200/00
RI7200/01
HR7200/00
HR1576/00
MAINS
Motor assy
RedGreenBlack
Brown Blue
5
4
3
2
1
Orange
Max speed
STAND:
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
• Push with a small screwdriver the 2 hooks inside the
stand.
• Press both arm-flaps like shown, that you can remove the
arm from the stand.
Circuit diagram
REPAIR INSTRUCTION
Mounting gearwheels
When mounting the gearwheels make sure that the cams
of the gearwheels are situated at the front of the beaters.
The angle between the beaters must be 45°.
So when carrying out a repair be sure that the gearwheels
are mounted correctly (see Fig. 1).
90°45°
Fig. 1
Lubrication
Use graphite grease code no. 4822 390 20004 to grease the
appliance on the following points:
1. Spaces between the teeth of the wormwheels.
2. Both sides of the wormwheel shaft.
Motor
The motor cannot operate properly, when, due to
contamination, carbon brush is unable to move freely in
guide bush and consequently cannot be pressed against the
commutator.
OPTIONAL (accessories)
• No specific issues.

3-5
RI7200/00
RI7200/01
HR7200/00
HR1576/00
8
5
6
14
2
1
3
7
2
12
9
10,11
13
3D view (Mixer)

4-5
RI7200/00
RI7200/01
HR7200/00
HR1576/00
Partslist (Mixer)
Pos Service code Description Remark RI
7200/00
RI
7200/01
HR
7200
HR
1576
1
2
3
4206 136 66211
4206 136 66201
4206 136 65541
4206 136 65881
4206 133 01931
Motor assy 220 V
Motor assy 127 V
Housing Walita
Housing Philips
Bottom housing (non driven)
White
White
X
X
X
X
X
X
X
X
X
X
X
X
4
5
6
7
8
4206 133 53121
4206 133 01891
4206 132 86951
4206 136 64531
4206 136 66161
Motor cushion
Ejector knob
Ejector spring
Switch assy 5 speed + Cables
Fleximix lock button + Brackets
Oyster
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
9
10
11
4206 133 02571
4206 136 65361
4206 136 65371
4206 136 65901
4206 133 02791
Turbo knob
Cordset assy 6 A
Cordset assy 3 A
Cordset assy 10 A / 250 V
Cord grommet
White
White
White
White
X
X
X
X
X
X
X
X
X
X
X
X
12
13
14
4206 133 09971
4206 133 01861
4206 132 86981
Insulator tab for terminal
FlexiMix lock button
Turbo knob spring
X
X
X
X
X
X
X
X
X
X
= changed

5-5
RI7200/00
RI7200/01
HR7200/00
HR1576/00
27262524
22
23
20
16,17
19
18
15
21
3D view & partslist (Stand)
Pos Service code Description RI7200 HR7200 HR1576
15
16
17
18
19
4203 133 02071
4203 133 02081
4206 132 86921
4206 133 02061
4206 136 65581
Inlay (non driven)
Lock
Spring (lock)
Arm (non driven)
Stand assy White
X
X
X
X
X
X
X
X
X
X
20
21
22
23
24
4203 133 53300
4206 132 86911
4206 133 02101
4206 133 02091
4206 136 64681
Rubber feet 1 pcs
Spring (release knob)
Release knob
Bowl 3,5 L
Strip beater bearing left assy
X
X
X
X
X
X
X
X
X
X
25
26
27
4206 136 62121
4206 136 64701
4206 136 62021
4206 136 64711
4206 136 64721
Strip beater bearing left assy (local)
Strip beater bearing right assy
Strip beater bearing right assy (local
Dough hook left assy
Dough hook right assy
X
X
X
X
X
X
X
X
X
X
= changed