Philips PET940/93 User manual

Philips Portable DVD Player PET940
Quick start guide
Charge
1
1Switch OFF the set.
2Connect the supplied adaptor to the set and the AC
outlet.
3The RED light comes on.
4The battery pack will be fully charged in approximately
4 hours.When the RED light goes off, it means that the
battery pack is fully charged.
TIP:You can operate the DVD player while charging.
However, it takes longer time to fully charge the battery.
Enjoy DVD
2
1Open the lid.
2Press and hold POWER.
3The GREEN light turns on.
4Open the DVD door by pushing the OPEN.
5Remove protective card (if any).
6Load the DVD disc.
7Close the DVD door and the set will automatically start
to play.
8Use the control keys on the set or the remote control.
Connect to TV
3
1Connect the set to the TV as shown.
2Please select an appropriate input or source on the TV.
You can consult the owner’s manual of your TV. (If your
TV does not have Audio and Video inputs, you will need
to purchase a RF modulator. Please consult your dealer
for more information.)
English
White
Red
Ye l l o w
1
2
31
2
8
7
4
63