Philips CDR-600 User manual

PhilipsAudio CD Recorder CDR 600:Getting started…
English
IN OUT
L
R
CDR/TAPE
AMPLIFIER/
RECEIVER
DIGITAL
COAXIAL
SOURCE
(CD player, DVD,DAT)
IN
L
R
ANALOG
CD RECORDER
OUT
L
R
PHONO
RECORD PLAYER
OUT
L
R
ANALOG
IN
L
R
PHONO
DIGITAL
IN OUT
IN OUT OPTICAL
IN
ANALOG
L
R
L
R
CDR
OUT
DIGITAL
IN
General information
This Quick Installation Card gives a rough overview
and helps to quickly start with basic steps.Please
read the supplied instruction manual for detailed
information.
Mains
1Check whether the mains voltage as shown on the type
plate corresponds to your local mains voltage.If it does
not consult your dealer or service organization.
2After all connections have been made connect the
mains cable to AC MAINS~ and to the wall socket.This
switches on the mains supply.
To disconnect the set from the mains completely,
remove the mains plug from the wall socket.
Discs for recording
Use discs with the“DigitalAudio”logo only:
– CD-Audio Recordable (CDR) discs,or
– CD-Audio ReWriteable (CDRW) discs.
Do not use computer CDR(W)s as recording
would not work properly.
Discs for playback
ReWritable
playback standard CDRW Philips
in: CD player compatible CDR 600
disc: CD player
finalized CDR ●● ●
finalized CDRW ●●
unfinalized CDR ●
or CDRW
xp QRC CDR 600/17 English 15-03-2001 14:53 Pagina 1

PhilipsAudio CD Recorder CDR 600:Getting started…
English
3103 306 17881 Printed in Hungary CMM/JS/0111
Recording an entire CD
OPEN/CLOSE
PLAY/PAUSE
OPEN/CLOSE
1Press OPEN/CLOSE /.
Insert a CD into the CD recorder tray. 3Press PLAY/PAUSE 2/; to start playback.
OPEN/CLOSE
2
SOURCE
RECORDIN
TYPE
OPEN/CLOSE
OPEN/CLOSE OPEN/CLOSE
O P
SOURCE
RECORDIN
TYPE
2x
2
Recording a single track
Playing a CD
Finalizing manually
OPEN/CLOSE
FINALIZE
CORDING
RECO
1Insert the CDR(W)
to be finalized into
the CD recorder.
2Press
FINALIZE .3Press RECORD
to start the finalization.
1Insert a blankAudio
CDR(W) into the
CD recorder tray.
3Press SOURCE
to select the
correct input
connection.
4PressTYPE
twice. 5Select the track on the
external CD
player.
2Insert a CD into
the tray of the
external CD
player.
2Insert the CD to be
copied into the tray of
the external CD player.
1Insert a blankAudio
CDR(W) into the CD
recorder tray.
6Press PLAY on
external CD
player to start
recording.
3Press SOURCE
to select the
correct input
connection.
4PressTYPE
once. 5Press PLAY on external CD
player to start
recording.
2Press
OPEN/CLOSE /
to close the tray.
xp QRC CDR 600/17 English 15-03-2001 14:53 Pagina 2