Philips SHB1900 User manual

UM_SHB1900
10_EN_V1.0
WK15373
2015 © Gibson Innovations Limited.
All rights reserved.
This product has been manufactured by, and
is sold under the responsibility of Gibson
Innovations Ltd., and Gibson Innovations Ltd.
is the warrantor in relation to this product.
Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips
N.V. and are used under license from
Koninklijke Philips N.V.
SHB1900
Register your product and get support at
www.philips.com/support
05.EN
User manual
um_shb1900_hk_en_150908_print.indd 5-6 08/09/2015 18:37:14

2
Pair the transmitter with your Bluetooth device
SHB1900 transmits wireless audio from the traditional AV products, such as TV,
Sound system, DVD player, PC etc.
1 Connect the audio cable to the audio output port of your AV product such
as PC or TV etc. Plug the SHB1900 into any USB port for power.
2 SHB1900 will automatically enter pairing mode, indicated by ashing red and
blue alternatively.
3 When pairing for the rst time, SHB1900 will search for Bluetooth audio
receiving devices such as Bluetooth headphones or Bluetooth speaker. Make
sure your Bluetooth audio receiving device is also in pairing mode at the
same time.
» SHB1900 will pair with your Bluetooth audio device automatically in
about 20 to 30 seconds.
» SHB1900 will ash blue every 5 seconds if paired successfully. You may
now enjoy listening wirelessly with your headphones or speaker.
Note
• If SHB1900 has been paired with a BT audio device, it will rst try to
connect to it when powered on. If no connection is established within 30
seconds, it will then enter pairing mode to search for a new device.
• Please read the operating instructions of your BT audio device for the
pairing procedure.
• If pairing is not completed within 2 minutes, SHB1900 will exit pairing mode.
• To re-enter pairing mode, press the pairing button or re-plug the SHB1900.
Pairing button
1
um_shb1900_hk_en_150908_print.indd 7-8 08/09/2015 18:37:14