Philips FC7020 User manual

Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
ServiceManual
Philips Consumer Lifestyle
Sweep and Steam Cleaner
FC7020/01
FC7020/71
FC7020/81
14/07 Version 1.2
PRODUCT INFORMATION
Safety
• This product meets the requirements regarding
interference suppression on radio and TV.
• After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
• Colour : Star white and
resilient blue
Design features
• Dust chamber and watertank : Translucent
Performance
• Power consumption : 1500 W
• Noise level (Lc IEC) : <75 dB
• Input power (max) : 1500 W
Steam Management
• Heating-up time : <30 s
• Runtime (steaming) : 20 min
• Steam capacity : 20 g/min
• Steam temp. at nozzle : >100 °C
• Watertank size : 450 ml
Usability
• Adjustable telescopic stick : 100 - 120 cm
• Cord length : 6 m
• Removable stick assembly : From body (with a screw)
• Stand by mode : Auto steam shut-off
Weight and dimensions
• Dimensions microfiber pad : 27 x 11 cm
• Dimensions nozzle : 28 x 18 x 4.5 cm
• Dimensions appliance : 16 x 32 x 112 cm
• Weight (kg) : <3 kg
ACCESSORIES
• 1 parking pad
• Cleaning : 2 microfiber pads, Fast rotating brush
OPTIONAL (accessories)
• FC8056 : 2 microfiber pads and 1 filter assy

FC7020/01 /71 /81
2-8
• To replace the Rotating Brush (14) of the nozzle:
Turn the appliance upside down, open the Roller Brush
cover (18) by lifting it. Take the brush out by lifting it on
the right side and moving it out sideways to the right.
1
2
• To place the Brush, position the Brush over the Roller
Holder assy (13) then “click” the Brush into place at the
Roller Brush cover and close the Roller Brush cover.
12
3
• To replace the Brush Motor (15), Driving belt (12) and
Roller Holder assy (13):
Remove the 10 screws (D) on the bottom of the Nozzle
and push the 3 clicknocks on the front side with a
screwdriver, now the components can be reached.
• To replace the pump (10):
First remove the Water Tank (3) and Filter assy (4).
Remove the 4 screws (C), and remove the cover.
Now the pump is visible. Remove the clips from the
hoses and the valve and replace the pump.
C C
CC
Remark:
• You can use the delivered Pin (5) in the small plastic bag
for “unclogging” the little hole on the bottomside of the
Nozzle in case some calcium is present in the hole.
DISASSEMBLY- AND RE-ASSEMBLY ADVISE

FC7020/01 /71 /81
3-8
REPAIR INSTRUCTION
• If the Cordset needs to be repaired, in the repair centers
you need to add a connection box yourself.
• Because from wk. 1347 onwards the connection box has
been replaced by a plastic cap, see pictures.
Old situation:
New situation:

FC7020/01 /71 /81
4-8
MP
C4
0.47µF
D6
KBP310
AC
220V
50Hz
L
N
SW2
Brush On/Off switch
Steamer
switch
SW1
Heating On/Off switch
M+
M–
F2
0.5A
L1-2
C1-2
C1-1
L1-1
DC
Motor Pump
C2
2.2nF
C3
2.2nF
C6
4.7µF
400V
0.47µF
C1 51Ω/2W
R1
39k
2W
R2
39k
2W
R5
330k
R4
330k
D1
4007
721
6
D9
Heater Steam
D10
D1
4007
D4
4007
D3
4007
TP2 TP1
Heating
Element
1250W
Open
100°C
Closed
100°C
C5
47µF
D5
12V
R3
F3
240°C
F1
240°C
Frequency
converter
Relay
SRC4078
5348
L2
15mH
L1
30µH
CIRCUIT DIAGRAM
PARTS LIST
Pos Service code Description Remark
1
3
4
5
6
9965 100 65711
9965 100 60777
4322 004 93841
9965 100 60767
9965 100 60768
Telescopic tube assy
Water tank
D.Calc lter
Pin for decalcication
Cleaning padholder
7
8
8
8
9
4322 004 93831
4322 006 09351
4322 006 09391
4322 006 09361
9965 100 60775
Cleaning pad
Cordset Octopus EU
Cordset Octopus AU
Cordset Octopus China
Front body (incl. Switch)
FC7020/01
FC7020/71
FC7020/81
10
11
12
13
14
4322 006 95031
9965 100 60766
9965 100 60771
9965 100 60776
9965 100 60765
Pump M2
Dust tank
Driving belt
Roller Holder assy
Rotating brush
220 - 240 V ~ 50 / 60 Hz 18 W
15
16
17
18
19
4322 006 95021
9965 100 60778
9965 100 60774
9965 100 60769
9965 100 70991
Motor H41-5HA1033B
Wheel big
Wheels small
Roller Brush cover
Nozzle assy
230 V 50 Hz
20
21
22
9965 100 70993
9965 100 70992
9965 100 70994
Hose clamp
Shrink tube
Tiewrap

FC7020/01 /71 /81
5-8
A
5x
1
7
3
4
5
6
EXPLODED VIEW

FC7020/01 /71 /81
6-8
B
10x
C
4x
10
9
8
20
21
22
EXPLODED VIEW

FC7020/01 /71 /81
7-8
D
10x
E
4x
14
17 (2x)
16 (2x)
15
18
13
12
11
19
EXPLODED VIEW

FC7020/01 /71 /81
8-8
Version history
Version 1.1 : FC7020/01 / FC7020/71 / FC7020/81 initial release.
Version 1.2 : In Parts List and Exploded views:
Added: Pos. 19, 9965 100 70991 Nozzle assy
Added: Pos. 20, 9965 100 70993 Hose clamp
Added: Pos. 21, 9965 100 70992 Shrink tube
Added: Pos. 22, 9965 100 70994 Tiewrap