Phonak Marvel User manual

How to Connect with
Marvel Hearing Aids
General Hearing Aid Operation
Rebooting your Rechargeable Aid
• Turn off by placing the aid in your charger,
OR press the lower part of the button for 3
seconds until the indicator light is solid red
• Turn on by removing the aid from your charger,
OR press the lower part of the button for 3
seconds until the indicator light is solid green.
Rebooting your Non-Rechargeable Aid
• Turn off the aid by opening the battery door.
• Turn on the aid by closing the battery door.
Phonak Marvel hearing aids can connect directly to any Bluetooth compatible device to stream audio into
both ears. Stay connected to your work, friends, and family with your Marvel hearing aids.
CUSTOM IN EAR
BTE/RIC
ON
ON OFF
OFF

Connecting to Computers/Tablets
1. Go into the Bluetooth settings of your computer/tablet and turn Bluetooth ON. Figure 1
2. Reboot your hearing aids. You now have 3 minutes to pair your hearing aids with your device.
3. Add a device or search for your hearing aid. When your hearing aid appears, select it.
Even if you wear 2 hearing aids only 1 aid will pair to your laptop. Figure 2
4. When successfully paired you will hear a confirmation beep in your hearing aid(s).
5. Play audio source (i.e. YouTube, Webinar).
6. Audio should stream automatically. If it does not, ensure “Headphones” is selected- click
on the speaker on the bottom right corner of your computer screen. Figure 3
Figure 1 Figure 3
Figure 2

Connecting to Cells/Tablets
1. Go to your home screen and tap on the “Settings” icon.
2. Enable your Bluetooth.
3. Reboot your hearing aids. You now have 3 minutes to pair your hearing aids with your device
4. Select the hearing aid from the Bluetooth list. Even if you wear 2
hearing aids only 1 aid will pair to your cell/tablet.
5. When successfully paired you will hear a confirmation beep in your hearing aid(s).
6. Play audio source (i.e. YouTube, Spotify).
7. Audio should stream automatically.