Photoneo PhoXi 3D Scanner S User manual
PhoXi 3D Scanner S
Quick Start Guide
Scope of Delivery
■PhoXi 3D Scanner S
■Desktop PoE injector (input: 90 ~ 264output: VAC, 33.6W, 56V PoE, IEEE802.3at)
■M12-X (m) RJ45 (m) ethernet cable
■Ethernet cable (2x RJ45 (m))
Operation of the Scanner
The scanner is operated by the PhoXi Control application. PhoXi Control allows the user to
control the scanner either manually through a graphical user interface or programmatically
through the provided API.
All PhoXi Control resources can be found on the following link:
www.photoneo.com/3d-scanning-software/
Read the complete PhoXi 3D Scanner Manual for more details:
www.photoneo.com/kb/scanner
08/2020 PhoXi 3D Scanner S - Quick Start Guide 1/8
Scanning Parameters - Model S
Parameter
Value
Resolution
Up to 3.2 Million 3D points
Scanning range
384 - 520mm
Optimal scanning distance (sweet spot)
442mm
Scanning area (at sweet spot)
360 x 272mm
Point to point distance (at sweet spot)
0.174mm
Calibration accuracy (1σ)
0.050mm
Temporal noise (1σ)
0.050mm
Scanning time
250 - 2250ms
Dimensions
77 x 68 x 296mm
Baseline
230mm
Weight
900g
3D point throughput
16 Million points per second
These parameters are valid at 22°C - 25°C, at focus distance for white objects with 80 % albedo.
08/2020 PhoXi 3D Scanner S - Quick Start Guide 2/8
Scanning Volume - Model S
08/2020 PhoXi 3D Scanner S - Quick Start Guide 3/8
Mounting the Scanner
Mounting options:
■Use 4x M4 screws with a metal mounting plate of suitable size - preferred mounting
method for heat dissipation.
■Use a M8 screw.
■Use a 3/8 - 16 UNC screw with a tripod.
⚠ WARNING
Hot surface warning
The surface of the processing unit becomes hot to touch when the device is in use. Mount
the device on a metal mounting plate that will act as a thermal bridge to dissipate the heat
or use the carbon body to manipulate the device.
Installation site restrictions:
■Ensure that mounting construction is rigid enough to avoid vibrations during scanning.
■Allow clearance of 25 mm for natural convection cooling.
■Operating temperature of the scanner is 0 °C to 45 °C.
⌑Operating temperature for optimal scanning performance is 22°C to 25°C.
■Separate the scanner from high-voltage devices and devices generating high electrical
noise.
The complete environment conditions for installation can be found in the full user manual at
www.photoneo.com/kb/scanner
08/2020 PhoXi 3D Scanner S - Quick Start Guide 4/8
Connecting to the Scanner
Power over ethernet
■Recommended powering option
■1Gbps ethernet cable to the PoE
injector IN port
■M12-X ethernet cable to the PoE
injector OUT port
24V & GPIO
■Desktop & DIN rail adapters
supported
M12 A Coded - 24V & GPIO Pinout
Pin
Cable Color
Pinout
Function
1
White
DC_IN
+ 24V
2
Brown
OPTO_IN2_GND
*laser interlock ground
3
Green
GND
-
4
Yellow
OPTO_IN1
-
5
Grey
OPTO_IN1_GND
-
6
Pink
OPTO_OUT
-
7
Blue
OPTO_OUT_GND
ground
8
Red
OPTO_IN2
*laser interlock signal
* laser interlock requires special firmware package
08/2020 PhoXi 3D Scanner S - Quick Start Guide 5/8
Status LEDs
The LEDs indicate the following states of the scanner:
Supported Network Topologies
08/2020 PhoXi 3D Scanner S - Quick Start Guide 6/8
Powering Requirements
Connector
M12 X coded
M12 A coded
PoE Standard
IEEE802.3at
-
Operating voltage Ue DC
min. 55 V
24V (20 - 30V)
Residual ripple maximum (% of Ue)
0.5 %
2%
Rated operating current Ie (Imax)
0.36 A (0.6 A)
1A (2A)
Minimum power
33 W
60W
Shielding
Fully Shielded RJ45
-
Transfer data rate
1 Gbit
-
Maximum recommended cable length
20 m
20m*
* for cable length over 10 m please ensure operating voltage at minimum 28 V
Powering Accessories for Custom Cablings
PhoXi 3D Scanners offer several options to connect the device. See the PhoXi 3D Scanner
User Manual for more information.
Photoneo offers a selection of:
■Cables in different configurations of lengths and materials,
■Adapters (desktop, DIN),
■Old PhoXi 3D Scanner cabling compatibility accessories
Please contact your sales representative for inquiries about the available options.
Warranty
Warranty conditions are stated in General Term and Conditions on Photoneo website:
www.photoneo.com/kb/terms-conditions
08/2020 PhoXi 3D Scanner S - Quick Start Guide 7/8
Safety
PhoXi 3D Scanner Model S is a laser class 3R device. Class 3R lasers are considered safe
when handled carefully.
Laser class 3R label
⚠ WARNING
Do not deliberately look into the laser beam. This may cause injury to the retina.
Laser protective eyewear is normally not necessary.
Contact Us
Headquarters
Photoneo s.r.o.
Plynarenska 1
82109 Bratislava
Slovakia
08/2020 PhoXi 3D Scanner S - Quick Start Guide 8/8
Other manuals for PhoXi 3D Scanner S
1
This manual suits for next models
1
Table of contents
Other Photoneo Scanner manuals
Photoneo
Photoneo PhoXi 3D Scanner M User manual
Photoneo
Photoneo PhoXi User manual
Photoneo
Photoneo MotionCam-3D M User manual
Photoneo
Photoneo PhoXi User manual
Photoneo
Photoneo PhoXi 3D Scanner XS User manual
Photoneo
Photoneo PhoXi 3D Scanner M User manual
Photoneo
Photoneo PhoXi User manual
Photoneo
Photoneo PhoXi XS User manual
Photoneo
Photoneo PhoXi 3D Scanner S User manual
