Physiomed CHUDO HIVAMAT 200 Personal User manual

READ THIS MANUAL BEFORE USING THIS PRODUCT
Important Safety Information Inside
Keep this manual in a safe location
for future reference
GA02040US
M A N U F A C T U R E D B Y
O P E R A T I N G I N S T R U C T I O N S
HIVAMAT™200 Personal
B Y

Legal Notice
Distribution, reproduction and translation of the software and its documentation (or excerpts thereof) are
prohibited without the prior written consent of PHYSIOMED ELEKTROMEDIZIN AG.
PHYSIOMED ELEKTROMEDIZIN AG reserves the right to change the software and associated data as well
as the documentation without notice. All other rights reserved.
Officially recognized exclusive distributor of HIVAMAT™ 200 Personal in the US:
KISMET HOLDINGS GROUP/CHUDO
10938 HIGHWAY 58
GEORGETOWN, TN 37336
USA
PHONE: [phone]
E-MAIL: [email protected]
HIVAMAT™ 200 is a worldwide patented technology.
HIVAMAT™ 200 Personal is made in Germany in compliance with the quality requirements of ISO
13485, FDA regulations, and the applicable safety standards:
• IEC 60601-1: Electronic medical devices, Part 1: General safety requirements
• IEC 60601-1-4 Electronic Medical Devices - Part 1-4: General Safety Requirements - Accompanying
Standard: Programmable Electronic Medical Devices
Operating Instructions last updated: 2020-07-31

Table of Contents
Chapter 1 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 IndicationsforUse................................. 2
1.2 Contraindications................................. 2
1.3 Warnings ..................................... 2
1.4 Precautions .................................... 3
Chapter2 Introduction...................................4
2.1 Definition of Symbols Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 GeneralNotes................................... 4
2.3 InstrumentOverview ............................... 5
2.4 InstrumentDescription .............................. 6
Chapter 3 Controls and Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.1 Function of Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . 7
3.1.1 Display<1>.................................... 7
3.1.2 DataSelector<2>................................. 7
3.1.3 Ports<3>..................................... 8
3.1.4 CardReader<4> ................................. 8
3.1.5 Power Adaptor Socket <5> . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.1.6 ControlLight<6>................................. 8
Chapter 4 Instrument Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.1 BatteryOperation................................. 9
4.1.1 Important Notes on Handling the Batteries . . . . . . . . . . . . . . . . . . . . 9
4.1.2 EconomyMode................................. 10
4.2 Preparations and Start-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.3 FunctionCheck................................. 11
4.4 CableCheck................................... 12
4.5 HandheldApplicator............................... 12
4.6 TherapyCard .................................. 13
Chapter 5 Treatment Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.1 MonitoringNotes................................ 15
Table of Contents PHYSIOMED ELEKTROMEDIZIN AG
HIVAMAT™ 200 Personal i

Chapter6 Indications...................................16
Chapter 7 Individual Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Appendix A Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
A.1 Service, Repairs, Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . 20
A.2 Cleaning and Disinfection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
A.3 LimitedWarranty ................................ 20
A.4 Disposal..................................... 20
A.5 Training..................................... 21
A.6 UL 60601-1-2 Electromagnetic Compatibility Declaration . . . . . . . . . . . 21
A.7 Settings..................................... 21
A.8 TechnicalData.................................. 22
A.8.1 Environment Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
A.9 Manufacturer.................................. 23
A.10 TechnicalSupport................................ 23
Appendix B Scope of Delivery and Accessories . . . . . . . . . . . . . . . . . . . . 24
B.1 ScopeofDelivery................................ 24
B.2 OptionalAccessories............................... 24
B.2.1 Self-CareKit................................... 25
Index......................................26
PHYSIOMED ELEKTROMEDIZIN AG Table of Contents
ii HIVAMAT™ 200 Personal

Chapter 1 Important Safety Instructions
WARNING
United States federal law restricts this instrument to sale by or on the order of a medical prac-
titioner licensed by the law of the State in which he/she practices to use or order the use of
the instrument.
The instrument must only be operated by medical practicioners who have undergone special
training. Use by unqualified personnel or consumers bears the risk of serious injury.
You must operate the instrument properly, i.e. in accordance with the Operating Instructions.
If the patient experiences any unpleasant sensation during treatment, the practitioner must
stop the treatment immediately. Prior to treatment, the practitioner has to explicitely inform
the patient about this.
Charge the battery according to the instructions found in this manual.
Never attempt to charge the battery on any other charging mechanism.
CAUTION
United States federal law restricts this instrument to sale by or on the order of a licensed
healthcare practitioner.
Operating the instrument in the proximity (e.g. 1 m) of a short-wave or micro-wave therapy
unit may cause output irregularities and must be avoided for this reason, as well as simultan-
eous connection of the patient to a high-frequency surgical instrument.
During the charging procedure, the patient must neither be connected with the titanium
neutral element, nor with the hand applicator!
The treatment card must not be copied, and any attempt to reproduce it or read out the data
will invalidate it. PHYSIOMED ELEKTROMEDIZIN AG accepts no responsibility for damage in-
curred in this way.
Contact the Technical Support (refer to Technical Support on page 23) if a monitoring note
does not disappear even after several automatic function checks. Never perform a treatment
when proper function of the instrument is not assured.
Before each treatment, adjust the intensity to match the respective conditions and pay atten-
tion to the contraindications (refer to Contraindications on page 2).
The instrument is to be used exclusively with original accessories. Otherwise, treatment results
might be insufficient.
1 Important Safety Instructions PHYSIOMED ELEKTROMEDIZIN AG
HIVAMAT™ 200 Personal 1

1.1 Indications for Use
WARNING
The instrument must only be operated by medical practicioners who have undergone special
training. Use by unqualified personnel or consumers bears the risk of serious injury.
The function of HIVAMAT™ 200 Personal is based on a pulsed electrostatic field which is built up in the
patient's body region to be treated. Its frequency changes between 5 - 250 Hz, according to the selec-ted
program. Due to the movement of the hand applicator or the therapists' gloved hands, a vibrating or
pumping effect with deep impact is induced in the patient's tissue.
Treatment with HIVAMAT™ 200 Personal has the following positive effects on the treated tissue:
• muscles are relaxed
• alleviation of pain is enhanced
• mobility is promoted
1.2 Contraindications
Therapy with HIVAMAT™ 200 Personal is not indicated in the following cases:
• acute infections
• acute inflammations with participation of pathogenic agents
• active tuberculosis
• acute venous diseases (untreated thromboses)
• untreated malignant processes
• erysipelas
• patients and therapists with cardiac pacemakers and other electronic implants
• heart disorders and diseases, especially cardiac insufficiency, decompensated cardiac edema, and car-
diac arrhythmia
• pregnancy
• hypersensitivity to electrostatic fields
• infectious skin diseases
• vertebrobasilar insufficiency (VBI)
1.3 Warnings
(a) Pulsed electrostatic fields should not be applied over swollen, infected, or inflamed areas or skin
erup-tions, e.g., phlebitis, thrombophlebitis, varicose veins, etc.
(b) Pulsed electrostatic fields should not be applied over, or in proximity to, cancerous lesions.
(c) Set the line voltage at the mains module to match the incoming line voltage.
(d) HIVAMAT® 200 Personal must not be used in the operating room, or in the presence of flam-mable
anesthetic gases mixed with air, oxygen or nitrous oxide.
Please also note the contraindications to pulsed static electromagnetic fields in Contraindications on page
2.
PHYSIOMED ELEKTROMEDIZIN AG 1 Important Safety Instructions
2HIVAMAT™ 200 Personal

1.4 Precautions
(a) Caution should be used for patients with suspected or diagnosed heart problems.
(b) Caution should be used for patients with suspected or diagnosed epilepsy.
(c) Caution should be used:
• When there is a tendency to hemorrhage following acute trauma or fracture;
• following recent surgical procedures when vibration may disrupt the healing process;
• over the menstruating uterus; and
• over areas of the skin which lack normal sensation.
(d) Instrument settings should be based on the guidance of the prescribing practitioner.
(e) Massage-intensifying systems should be kept out of the reach of children.
(f) Massage-intensifying systems should be used only with the accessories recommended by the
manufac-turer.
(g) Massage-intensifying systems should not be used while driving, operating machinery, or during any
activity in which vibration may put the user at undue risk of injury.
(h) Massage-intensifying systems emit electromagnetic waves: Maintain sufficient separation from other
electronic devices, and at least one-meter separation from any short wave or microwave therapy unit.
(i) HIVAMAT™ 200 Personal should only be used under medical supervision.
1 Important Safety Instructions PHYSIOMED ELEKTROMEDIZIN AG
HIVAMAT™ 200 Personal 3

Chapter 2 Introduction
With HIVAMAT™ 200 Personal you have acquired an extremely versatile deep oscillation system. The
instrument will only show its true potential, however, if you are well informed about its functions. For this
reason, carefully read these Operating Instructions and familiarise yourself with the use of the instrument.
2.1 Definition of Symbols Used
Please note the following typographical symbols in these Operating Instructions:
• Cross references and important terms used for the first time in this document are written in italics.
• Names of menus and symbols on the display are written in bold typeface.
Paragraphs that deserve special attention are highlighted in the following way:
Type Meaning
DANGER Alerts of extremely dangerous situations that might lead to death or serious injury.
WARNING Warns of other situations that might also lead to death or serious injury.
CAUTION For risks that might lead to less serious injury.
NOTICE Only for dangerous situations that might lead to damage to the product or other assets.
2.2 General Notes
CAUTION
Operating the instrument in the proximity (e.g. 1 m) of a short-wave or micro-wave therapy
unit may cause output irregularities and must be avoided for this reason, as well as simultan-
eous connection of the patient to a high-frequency surgical instrument.
The instrument may only be operated in dry rooms. It complies with the technical specifications of IEC
60601-1.
It is not intended for operation in explosion hazard zones or hydrotherapy rooms. Drastic temperature
changes should be avoided, since condensation could be caused within the instrument. Do not start up
the instrument until it is in thermal equilibrium with its environment.
The instrument is to be operated properly, i.e. in accordance with the Operating Instructions.
PHYSIOMED ELEKTROMEDIZIN AG 2 Introduction
4HIVAMAT™ 200 Personal

2.3 Instrument Overview
Front Panel
Legend
1 Display 4 Card Reader
2 Data Selector 5 Power Adaptor Socket
3 Ports 6 Control Light
Bottom Top
Symbols in the Display
Battery Indicator (refer to Battery Operation on page 9)
Indications
2 Introduction PHYSIOMED ELEKTROMEDIZIN AG
HIVAMAT™ 200 Personal 5

Individual Treatment
Settings Menu (refer to Settings on page 21)
Button Back
2.4 Instrument Description
CAUTION
During the charging procedure, the patient must neither be connected with the titanium
neutral element, nor with the hand applicator!
HIVAMAT™ 200 Personal is a deep oscillation system which is successfully used in various areas
of medicine.
HIVAMAT™ 200 Personal has two modes of operation:
•Treatment: In this mode, the instrument is separated from the mains. When the power adaptor is
plugged in, the instrument cannot be switched on and treatment can not be continued. Connecting
the power adaptor with the mains will reduce the intensity automatically to zero, treatment will be in-
terrupted, and the instrument will be switched off.
•Charging: While charging, treatment is not possible.
PHYSIOMED ELEKTROMEDIZIN AG 2 Introduction
6HIVAMAT™ 200 Personal

Chapter 3 Controls and Indicators
The design of HIVAMAT™ 200 Personal allows for easy operation, in combination with a variety of
functions. Because of its small size, the instrument is very easy to transport. It has been designed for oper-
ation also outside of therapy rooms, and is fed by a rechargeable battery for that reason.
All controls and indicators are integrated into the housing, thus allowing for easy cleaning of the instru-
ment's surface and protecting it from dust. The instrument's microprocessor monitors the safety-related
components, prevents from erroneous operation and checks the instrument after switching it on.
3.1 Function of Controls and Indicators
The following section introduces the individual indicators and controls of HIVAMAT™ 200
Personal. The numbers in angle brackets refer to the Instrument Overview on page 5.
3.1.1 Display <1>
In the Display <1> the available options or therapy
parameters are shown, depending on the context.
The battery symbol on the upper right corner shows
you the current state of charge of the batteries (also
refer to Battery Operation on page 9).
You can select a parameter using the Data Selector
<2>.
3.1.2 Data Selector <2>
The Data Selector <2> serves to select the therapy parameters shown
in the Display <1> as well as to adjust the intensity.
You can switch between the individual options by rotating the selector
and call the respective function by pressing it.
3 Controls and Indicators PHYSIOMED ELEKTROMEDIZIN AG
HIVAMAT™ 200 Personal 7

3.1.3 Ports <3>
The Ports <3> serve to connect the supplied cables (Ref. no. 00261 and
00262) for the hand applicator and the adhesive electrode or Titanium
neutral element with the instrument.
You can find instructions on how to connect the cables in section How
to prepare the applicator on page 15.
3.1.4 Card Reader <4>
The Card Reader <4> serves to insert the therapy card which en-
ables access to the user menus, and on which the therapy para-
meters are stored. The therapy card has to be inserted with with
the chip side facing down.
3.1.5 Power Adaptor Socket <5>
The Power Adaptor Socket <5> can be found on the bottom of the instrument.
The supplied power adaptor (Ref. no. 00055965, Sinpro HPU15-105) to charge the
battery is plugged in here.
3.1.6 Control Light <6>
NOTICE
The Control Light <6> will light up in yellow in case of an error. The according monitoring
note is shown in the Display <1>.
The Control Light <6> under the Data Selector <2> lights up in blue as soon as the intensity is being in-
creased. In case of low therapy frequency, the light is flashing in sync with the pulses. When the electro-
static field is cut short, the light goes out even with non-zero intensity. The Control Light <6> can also be
used to check the cables (refer to Cable Check on page 12).
PHYSIOMED ELEKTROMEDIZIN AG 3 Controls and Indicators
8HIVAMAT™ 200 Personal

Chapter 4 Instrument Operation
4.1 Battery Operation
CAUTION
The instrument contains a Lithium ion battery. Don't expose it to excessive heat or open fire.
The battery can only be replaced by an authorized service partner. Never open the instrument
yourself to replace the battery. Only use the supplied power supply (Ref. no. 00055965, refer
to Scope of Delivery on page 24) to charge the battery.
Important
In order to ensure a long life, the battery must be charged completely when first charged. The
first charging procedure should not be interrupted.
HIVAMAT™ 200 Personal uses rechargeable Lithium ion batteries for power supply, which allow
for operation independently from the mains.
The charging status of the batteries is displayed on the Display <1>:
Battery completely charged
How to Charge the Battery
CAUTION
During the charging procedure, the patient must neither be connected with the titanium
neutral element, nor with the hand applicator.
(1) Plug the supplied power adaptor into the Power Adaptor Socket <5> on the bottom of the instru-
ment. The batteries will be charged.
(2) Unplug the power adaptor from the instrument when the charging procedure is finished.
4.1.1 Important Notes on Handling the Batteries
WARNING
Charge the battery according to the instructions found in this manual.
Never attempt to charge the battery on any other charging mechanism.
In the event of battery cell rupture or leakage, contact the Technical Support (ref. Service, Re-
pairs, Maintenance on page 20) and avoid contact with the battery acid.
4 Instrument Operation PHYSIOMED ELEKTROMEDIZIN AG
HIVAMAT™ 200 Personal 9

NOTICE
Rechargeable batteries discharge over an extended period, even if the instrument is switched
off. This self-discharge process cannot be prevented; the following instructions must therefore
be considered to guarantee the battery a long service life.
If the instrument is not used for a longer period of time, please charge the battery completely
at least once every two months.
This will help to avoid exhaustive discharge, which might permanently affect the battery, so it
cannot be recharged. In this case, a replacement will be required.
The optimum charging temperature ranges between 50°F and 86°F (10°C to 30°C).
Charge the battery within this temperature range to avoid damage.
At temperatures below 32°F (0°C) the gas absorption reaction is not sufficient and causes an
increase of gas pressure inside the battery. This condition can activate the safety vent and lead
to alkaline gas leaking and battery performance deterioration. Charging efficiency of the bat-
tery drops at temperatures above 104°F (40°C) and can disrupt full charging, lead to deterior-
ation in performance and battery cell leakage.
Operate, transport and store the instrument at temperatures between 50°F and 104°F (10°C
and 40°C), with relative humidity ranging from 30%-60%.
Please refer also to Technical Data on page 22.
4.1.2 Economy Mode
The instrument automatically switches over to economy mode to save power. There are two stages:
(a) After about one minute the Display <1> will be dimmed. Press the Data Selector <2> to reset the il-
lumination to the value configured in the settings menu (refer to Settings on page 21).
(b) After about five minutes the instrument will switch off completely. Start it up again as described under
Preparations and Start-Up on page 11.
PHYSIOMED ELEKTROMEDIZIN AG 4 Instrument Operation
10 HIVAMAT™ 200 Personal

4.2 Preparations and Start-Up
How to Start up the Instrument
(1) Insert the therapy card with the chip side facing down into the Card Reader <4>.
Important
If the card is defective or incompatible, a respective error message will be displayed.
(2) Press the Data Selector <2> for about two seconds. You will hear an acoustic signal, the Display
<1> will be illuminated, and the start screen with the menu will be displayed:
Start Screen
You can now select an indication and begin the treatment (refer to How to perform a treatment with
indications on page 16).
How to Switch off the Instrument
(1) Press the Data Selector <2> for about five seconds. The Display <1> goes out.
(2) Remove the therapy card and unplug the cables from the Ports <3>.
4.3 Function Check
A function check is always necessary when you are unsure about whether the instrument is working prop-
erly.
How to Check the Function of the Instrument
(1) Press the Data Selector <2> for several seconds until the instrument switches off.
(2) Press the Data Selector <2> again until the instrument switches on:
• If the instrument is properly working, the available options are displayed on the Display <1>.
You can operate the instrument without any further precaution.
• If an error code is displayed, there is an instrument error. Proceed as described under Monitoring
Notes on page 15.
4 Instrument Operation PHYSIOMED ELEKTROMEDIZIN AG
HIVAMAT™ 200 Personal 11

4.4 Cable Check
If you should have the impression that a cable is defective during treatment, you can check it using the in-
strument.
How to Check a Cable
(1) Select a therapy and set the intensity to 100% using the Data Selector <2>.
(2) Plug the ends of the cable to be tested into the Ports <3>.
(3) Move the cable and pay attention to the Control Light <6> under the Data Selector <2>:
• The Control Light <6> is permanently on: The cable is defective.
• The Control Light <6> is off: The cable is OK.
• The Control Light <6> flashes when moving the cable: The cable is defective.
(4) Replace the defective cable immediately.
4.5 Handheld Applicator
CAUTION
Replace the treatment heads immediately if damaged. Any damage to the oscillator mem-
brane might lead to harmless (but unpleasant) sensations on the skin.
The handheld applicator consists of the following parts:
Hand Applicator (Exploded View)
(1) Applicator Handhold (Ref.-No. 00379)
(2) Cover
(3) Oscillator Plate
(4) Membrane
(5) Clamp Ring
Important
(2) - (5) make up the oscillator head in
the respective size.
The oscillator head is screwed into the handle. To remove the head from the handle, you must rotate it to
PHYSIOMED ELEKTROMEDIZIN AG 4 Instrument Operation
12 HIVAMAT™ 200 Personal

the left.
4.6 Therapy Card
CAUTION
The treatment card must not be copied, and any attempt to reproduce it or read out the data
will invalidate it. PHYSIOMED ELEKTROMEDIZIN AG accepts no responsibility for damage in-
curred in this way.
All programs available for HIVAMAT™ 200 Personal are stored on the therapy card. The therapy
card must be inserted to perform a treatment or to access the basic settings.
4 Instrument Operation PHYSIOMED ELEKTROMEDIZIN AG
HIVAMAT™ 200 Personal 13

Chapter 5 Treatment Preparation
WARNING
The instrument must only be operated by medical practicioners who have undergone special
training.
CAUTION
Before each treatment, adjust the intensity to match the respective conditions and pay atten-
tion to the contraindications (refer to Contraindications on page 2).
Before each treatment, check the gloves for damages (e.g. tears, holes). A pneumatic test by
inflating the gloves has to be conducted before each usage to reveal possible leakages. The
gloves have to be replaced in cases of especially sensitive perception (prickling sensation).
Before treatment, prepare the patient's skin area to be treated by drying or powdering.
Replace the oscillator head immediately if damaged. Any damage to the oscillator membrane
might lead to harmless (but unpleasant) sensations on the skin.
Important
You must choose the intensity according to the minimum dose principle, i.e. in the lower ef-
fective range.
The hand applicator or glove should stay in contact with the patient's skin and should be
moved on the body surface without lifting or stopping. Distinguish between therapy move-
ment and leading movement: The therapy movement (to the center of the body) has to be
performed with the appropriate pressure, the leading movement (back from the center of the
body) without pressure.
When treating with low frequencies (10 - 40 Hz), perform the therapy movement especially
slow. The leading movement may be quicker.
After switching to a new therapy phase, it might be necessary to re-adjust the intensity to
reach the same strength of oscillation.
With HIVAMAT™ 200 Personal you can perform treatments according to preset indicationsprograms
which are stored together with the corresponding therapy parameters on the therapy card. Each program
features a sequence of different frequencies.
Basically, treatment is done using treatment gloves. Hivamat adhesive electrodes have to be attached to
the patient and the therapist.
PHYSIOMED ELEKTROMEDIZIN AG 5 Treatment Preparation
14 HIVAMAT™ 200 Personal

How to prepare the applicator
(1) Plug the connection cables HIVAMAT™200 (Ref. no. 00261) for the hand applicator and for the
Titanium neutral element into the Ports <3>.
(2) Connect the Titanium neutral element with the other end of the cable and let the patient grip it. Al-
ternatively, you can attach it on any part of the patient's body.
(3) Connect the applicator to the appropriate cable.
(4) Continue with the steps described under How to perform a treatment with indications on page 16.
How to prepare the treatment with special gloves
(1) Plug the supplied Connection cable grey for adhesive electrodes (Ref. no. 00262) as well as one
of both connection cables HIVAMAT™200 (Ref. no. 00261) into the Ports <3> .
(2) Connect one PHYSIOPADS adhesive electrode (Ref. no. 00589) with the fastener button of the
grey connection cable. Attach the adhesive electrode to the arm or leg of the therapist. Avoid
sensit-ive skin areas and remove grease and skin residues to ensure good conductivity.
(3) Connect the connection cable HIVAMAT™ 200 with the Titanium neutral element and have the
patient grip it.
(4) Pull the supplied special gloves (Ref. no. 00346) over the hands of the therapist.
(5) Continue with the steps described under How to perform a treatment with indications on page 16.
5.1 Monitoring Notes
CAUTION
Contact the Technical Support (refer to Technical Support on page 23) if a monitoring note
does not disappear even after several automatic function checks.
Never perform a treatment when proper function of the instrument is not assured.
If a functional error is detected during the automatic function check or operation, one of the following
monitoring notes is shown on the Display <1>:
•NOTE_01 ... NOTE_05
In this case, treatment is automatically interrupted. Switch off the instrument by pressing the Data Select-
or <2> and switch it on again. If the monitoring note persists even after several automatic function
checks, you must consult the technical service.
5 Treatment Preparation PHYSIOMED ELEKTROMEDIZIN AG
HIVAMAT™200 Personal 15

Chapter 6 Indications
With HIVAMAT™ 200 Personal you can perform treatments according to preset indications which are
stored together with the corresponding therapy parameters on the therapy card. For each displayed
indica-tion you can refer to the recommended therapy instructions. Each indication features an image of a
body region to be treated, which shows the preferable direction of treatment.
How to perform a treatment with indications
(1) Before treatment, prepare the patient's skin area to be treated by drying or powdering.
(2) Start up the instrument as described under How to Start up the Instrument on page 11.
(3) Select INDICAT in the side menu to go to the list of indications. The menu shows the currently selec-
ted page (e.g. 1/6).
(4) Rotate the Data Selector <2> until you get to the page with the desired program.
(5) Press the Data Selector <2> to access the page.
(6) Rotate the Data Selector <2> to navigate to the desired program.
(7) Press the Data Selector <2> again. The therapy parameters of the selected indication are displayed.
The menu shows the currently selected page (e.g. 1/4)
PHYSIOMED ELEKTROMEDIZIN AG 6 Indications
16 HIVAMAT™ 200 Personal