Physipro NeoX DYNAMIC User manual

Owner's Manual
This booklet contains important information about this product.
Please give to the owner upon delivery.

NEOXTM Dynamic
wheelchair
ENGLISH
2
Owner’s Manual: NEOXTM DYNAMIC
Dynamic Tilt Wheelchair
Physipro Inc. is proud to count you among its customers and would like to
thank you for the confidence you have shown by purchasing our product.
This owner’s manual was created to provide you with all the information
needed to allow you to use our product in a safe and optimal way. For all
adjustments and settings, we strongly recommend you contact your distributor.
Physipro Inc relieves itself of all liability should physical injury or property
damage occur due to the lack of maintenance or misuse of our product, or from
modifications made to the product without the prior written consent of
Physipro Inc.
For Physipro Inc. your satisfaction is our highest priority.
Product information:
Purchase date:
Serial number:
Distributor:
Address:
Telephone:

Owner’s Manual
ENGLISH
3
Table of content
1. Device Plan ......................................................................................................7
Standard Components........................................................................................................... 8
Optional Components............................................................................................................ 9
2. Technical Specifications................................................................................11
3. Recommendations ........................................................................................16
Safety Inspection Checks....................................................................................................16
Safety Guidelines....................................................................................................................17
General Warnings...................................................................................................................18
Getting to know your wheelchair ...................................................................................18
Maximum load capacity......................................................................................................18
Surrounding environment.................................................................................................18
Sports and weight training................................................................................................19
Street use..................................................................................................................................19
Assisting a wheelchair occupant.....................................................................................19
Warnings: Falls and Tips .....................................................................................................20
Changing clothes ....................................................................................................................20
Grabbing an item, bending over, or leaning ..............................................................20
Transfers....................................................................................................................................21
Obstacles ..................................................................................................................................21
Going up a sidewalk or step..............................................................................................22
Going down a sidewalk or step........................................................................................22
Going up or down stairs .....................................................................................................23
Escalators ..................................................................................................................................24
Center of balance...................................................................................................................24
Moving backwards................................................................................................................24
Wheelies....................................................................................................................................24
Going up or down a slope or a ramp.............................................................................25
Going down a slope or a ramp.........................................................................................26
Going up a slope or a ramp ...............................................................................................26
4. Instructions....................................................................................................27
Required tools..........................................................................................................................27
Seat-to-Floor Height .............................................................................................................28
Modifying the position of the axle mounting block................................................29
Modifying the position of the caster wheels..............................................................30
Revision 0
July 2022

NEOXTM Dynamic
wheelchair
ENGLISH
4
Propulsion Wheels.................................................................................................................31
Installing the propulsion wheels -Threaded axle......................................................31
Removing propulsion wheels -Threaded axle ............................................................31
Installing propulsion wheels – Quick-Release axle ..................................................32
Removing propulsion wheels -Quick-Release axle ...................................................32
Adjusting the Quick-Release axle ....................................................................................32
Using the Quick-Release axle............................................................................................33
Propulsion wheel horizontal positioning.....................................................................33
Propulsion wheel lateral positioning.............................................................................34
Pneumatic Tires (option) ....................................................................................................35
Installing the inner tube .....................................................................................................35
Inflating the tire......................................................................................................................35
Rear Caster Tilt Mechnism (6-wheel option) ............................................................36
Installing the rear cater tilt mechanism........................................................................36
Clearing obstacles with the rear caster tilt mechanism .........................................36
Front Casters.............................................................................................................................38
Assembling and installing the front caster fork ........................................................38
Installing caster wheels.......................................................................................................39
Seat ................................................................................................................................................40
Modifying seat depth...........................................................................................................40
Modifying seat width (option)..........................................................................................41
Pelvic Positioning Belt .........................................................................................................42
Installing the pelvic positioning belt.............................................................................42
Adjusting the pelvic positioning belt............................................................................42
Backrest.......................................................................................................................................43
Modifying back post height ..............................................................................................43
Standard Backrest .................................................................................................................44
Dynamic Backrest..................................................................................................................45
Reclining Gas Spring Backrest ..........................................................................................47
Installing the tension bar....................................................................................................49
Installing a headrest support mounting fixture on the tension bar..................49
Installing the stroller bar (option) ...................................................................................50
Adjusting the stroller bar angle:......................................................................................51
Installing an activation lever.............................................................................................51
Tilt Mechanism.........................................................................................................................52
Limiting the tilt angle ..........................................................................................................53
Replacing the self-blocking cylinder..............................................................................53
Adjusting the tilt angle........................................................................................................54
Power Tilt (option)...................................................................................................................55

Owner’s Manual
ENGLISH
5
Armrest .........................................................................................................................................57
'' U '' type armrest...................................................................................................................57
'' T '' type armrest ...................................................................................................................58
Footrest .......................................................................................................................................59
Installing the footrest...........................................................................................................59
Removing the footrest.........................................................................................................59
Adjusting footrest length...................................................................................................59
Folding the flip-up footplate .............................................................................................60
Adjusting footplate depth .................................................................................................60
Adjusting the horizontal angle of the footplate ......................................................60
Adjusting the vertical angle of the footplate ............................................................60
Elevating andArticulating Legrest ................................................................................61
Installing the legrest.............................................................................................................61
Adjusting legrest height atknee level...................................................................61
Adjusting legrest length.................................................................................................61
Removing legrest...............................................................................................................61
Adjusting legrest angle...................................................................................................61
Wheel Locks...............................................................................................................................62
Installing wheel locks...........................................................................................................62
Adjusting the brake force...................................................................................................62
Using wheel locks..................................................................................................................63
Attendant Wheel Lock (4-wheel or 6-wheel option) ............................................64
Installing the attendant wheel lock................................................................................64
Adjusting the brake force...................................................................................................64
Using the attendant wheel lock.......................................................................................64
Anti-Tips......................................................................................................................................65
Installing anti-tips..................................................................................................................65
Adjusting anti-tips.................................................................................................................65
Removing anti-tips................................................................................................................65
Disengaging anti-tips ..........................................................................................................66
5. Transport .......................................................................................................67
6. Cleaning andMaintenance ...........................................................................78
General Recommendations .........................................................................78
Cleaning your wheelchair ..................................................................................................78
Painted surfaces.....................................................................................................................78
Axle and Moving Parts.........................................................................................................76
Sling Backrest..........................................................................................................................79
Comfort Accessories.............................................................................................................79
Disinfection..............................................................................................................................79
Revision 0
July 2022

NEOXTM Dynamic
wheelchair
ENGLISH
6
Maintenance .............................................................................................................................80
Maintenance Checklist.....................................................................................................80
Replacement Parts.............................................................................................................83
Repair Services ....................................................................................................................83
7. Storage and Shipping ...................................................................................84
Storage.........................................................................................................................................84
Shipping......................................................................................................................................84
8. Warranty ........................................................................................................85

Owner’s Manual
ENGLISH
7
1. Device Plan
NEOXTM Dynamic
The NeoxTM Dynamic wheelchair with aluminum frame provides remarkable
versatility and adaptability. The numerous adjustments ensure a personalized
postural support throughout the occupant’s changing needs and clinical conditions.
The 30º tilt system allows the occupant to change the angle of the seat and backrest
during the day to prevent the formation of pressure sores, optimize comfort and
enable the occupant to be placed in a resting position.
The tilt pivot point is located at the very front of the frame, this ensures that knee
height remains constant regardless of the wheelchair’s tilt angle. This feature
facilitates lower limb propulsion.
The NeoxTM Dynamic wheelchair offers various optional components and
adjustments to meet the occupant’s specific needs.
Designed for use as a seat in a motor vehicle or adapted transport. This wheelchair is
suitable for individuals weighing 265 lbs or less.
Intended for an adult clientele as well as elderly clients, who are experiencing a loss
in mobility, episodes of spasticity, or have a medical condition.
It is primarily meant for use in long-term care facilities, public or private retirement
homes or wheelchair accessible private housing.
Revision 0
July 2022

NEOXTM Dynamic
wheelchair
ENGLISH
8
Standard Components – NEOXTM DYNAMIC
The standard components provided with the NeoxTM Dynamic wheelchair are shown
in the picture below.
NEOXTM DYNAMIC - Standard Components
A Rigid seat plate, with depth adjustment
B Rigid backrest
C
Straight back post, with angle and height adjustments
D Push handles with grip covers, with height and orientation adjustments
E Armrest, desk length, flip-back or removable
F Armrest foam pad, desk length, flat
G Legrest bracket, tapered or narrowed, removable or pivoting
H Separated footrest, removable, with angle and depth adjustments, standard
length
I Propulsion wheel, any diameter
J Fixed-mounted wheel axle
K Semi-solid propulsion wheel tire, any diameter
L Caster wheel with semi-solid tire, any diameter

Owner’s Manual
ENGLISH
9
M Caster forks, with height adjustment
N Wheel locks, Push-to-lock
O Handrims
P Pelvic positioning belt
Q Anti-tip device
R Tie-down strap securement points for adapted transport
Optional Components – NEOXTM DYNAMIC
Physipro Inc. offers a vast selection of accessories and options to ensure that each
wheelchair can be customized to the specific needs of the occupant. For more
information, please contact Physipro Inc. or consult the order form.
NEOXTMDYNAMIC – Substitutional Components
Sling backrest, with tension adjustment
Stroller bar with grip cover, with height and orientation adjustment
Armrest, full length, flip-back or removable
Armrest foam pad, full length, flat
Armrest foam pad, waterfall style
Armrest gel pad
Elevating and articulating legrest
Separated footrest, removable, with angle and depth adjustments, oversized
Folding footrest, full width, with angle and depth adjustment
Plastic propulsion wheels, any diameter
Quick-release propulsion wheel axle
Pneumatic propulsion wheel tire, standard pressure, any diameter
Wheel locks, Pull-to-lock
Plastic coated handrims
Revision 0
July 2022

NEOXTM Dynamic
wheelchair
ENGLISH
10
NEOXTM DYNAMIC - Add-on Components
Dynamic or Reclining gas spring backrest
Clothing guard
Calf support with flat or profiled padding, with angle, depth, and height
adjustments
Calf strap with padding, single
Calf strap with padding, double
Heel support strap, adjustable
Wheel lock handle extension, telescopic or fixed
Spoke-guard
Reflective safety stickers
Backrest tension bar
Headrest support mounting fixture for backrest tension bar, with height
adjustment
Headrest support, with angle, depth, and height adjustment
Padded headrest
Autres composants optionnels disponibles – NEOXTM DYNAMIC
Attendant wheel lock
Power-tilt mechanism (occupant-controlled)
Cane holder, single or double
Oxygen tank holder

Owner’s Manual
ENGLISH
11
2. Technical Specifications
NEOX
TM
DYNAMIC
TECHNICAL SPECIFICATIONS
Manufacturer Physipro Inc.
Model NeoxTM Dynamic Tilt wheelchair
Maximum load capacity 265 lbs (120 kg)
MEASUREMENT OF SEATING AND WHEEL DIMENSIONS
Seat Plane angle
Method of measurement:
Part 1: ISO 7176-7, section 7.3.2
0° to 30°
Effective seat depth
Method of measurement:
Part 2: ISO 7176-7, section 7.3.3
14'' to 20'' (355 mm to 505 mm)
Effective seat width
Method of measurement:
Part 4: ISO 7176-7, section 7.3.5
14'' to 22'' (355 mm to 560 mm)
Seat surface height at front edge
Method of measurement:
Part 5: ISO 7176-7, section 7.3.6
13'' to 19'' (330 mm to 480 mm)
Adjustable in increments of 1''
Backrest angle
Method of measurement:
Part 6: ISO 7176-7, section 7.3.7
Standard Backrest: 85º to 120º
Dynamic Backrest: 85º to 110º
Adjustable in increments of 5º
Reclining Gas Spring Backrest: 85º to 130º,
continuous adjustment
Backrest height
Method of measurement:
Part 7: ISO 7176-7, section 7.3.8
Standard Back Post: 16'' to 25'' (405 mm to 635 mm)
Dynamic Back Post: 14 ¾'' to 27 ¾'' (356 mm to 686 mm)
Adjustable in increments of 1''
Footrest to seat distance
Method of measurement:
Part 11: ISO 7176-7, section 7.3.12
60º Footrest: 11 ¼'' to 21'' (280 mm to 530 mm)
70º Footrest: 10 ¾'' to 20 ½'' (255 mm to 508 mm)
90º Footrest: 10 ½'' to 20 ½'' (254 mm to 508 mm)
Adjustable in increments of ½''
Leg to seat surface angle
Method of measurement:
Part 15: ISO 7176-7, section 7.3.16
60°, 70°, 90°
Armrest height
Method of measurement:
Part 16: ISO 7176-7, section 7.3.17
T-type Armrest: 8'' to 15 ½'' (200 mm to 381 mm)
U-type Armrest: 6 ¾'' to 16 ½'' (152 mm to 406 mm)
Adjustable in increments of ½''
Caster/front wheel diameter
Method of measurement:
Part 27: ISO 7176-7, section 7.3.28
5'' (127 mm), 6'' (152 mm) or 8'' (203 mm)
Revision 0
July 2022

NEOXTM Dynamic
wheelchair
ENGLISH
12
DETERMINATION OF DIMENSIONS AND MANOEUVRING
Overall length
Method of measurement:
ISO 7176-5, section 8.2
Effective seat depth + 27 ½'' (686 mm)*
Overall width
Method of measurement:
ISO 7176-5, section 8.3
Effective seat width + 11'' (280 mm)*
Stowage length
Method of measurement:
ISO 7176-5, section 8.5
N/A
Stowage width
Method of measurement:
ISO 7176-5, section 8.6
N/A
Ground clearance
Method of measurement:
ISO 7176-5, section 8.14
1'' (25 mm)**
Turning diameter
Method of measurement:
ISO 7176-5, section 8.13
65 ¼'' (1651 mm)
Reversing width
Method of measurement:
ISO 7176-5, section 8.12
N/A
Pivot width
Method of measurement:
ISO 7176-5, section 8.11
51 ½'' (1295 mm)
Push handle height
38'' (965 mm)
Required width of angled
corridor
42 ½'' (1080 mm)
Required doorway entry depth
54 ½'' (1384 mm)
Required corridor width for side
opening
36 ⅜'' (924 mm)
Anti-tip lift height (Rising) 1 ½'' (38 mm)
* May vary depending on the selected options - footrest included.
** Based on the lowest setting of the anti-tip devices.
Handrim diameter
Method of measurement:
Part 23: ISO 7176-7, section 7.3.24
Wheel: 20'' (508 mm) : Handrim: 17 ⅞'' (432 mm)
Wheel: 22'' (559 mm) : Handrim: 19 ⅛'' (483 mm)
Wheel: 24'' (610 mm) : Handrim: 21 ¼'' (533 mm)
Horizontal displacement of
wheel axle
Method of measurement:
Part 25: ISO 7176-7, section 7.3.26
Adjustment range: 3'' (76 mm),
Adjustable in increments of 1''

Owner’s Manual
ENGLISH
13
DETERMINATION OF FORWARD STATIC STABILITY
Tipping angle of wheelchair in the least stable configuration,
with caster wheels unlocked
Method of measurement: ISO 7176-1, section 8.2
18,1°
Tipping angle of wheelchair in the least stable configuration,
with caster wheels locked
Method of measurement: ISO 7176-1, section 8.3
N/A
DETERMINATION OF REARWARD STATIC STABILITY
Tipping angle of wheelchair in the least stable configuration,
with propulsion wheels unlocked
Method of measurement: ISO 7176-1, section 9.2
23,8°
Tipping angle of wheelchair in the least stable configuration,
with propulsion wheels locked
Method of measurement: ISO 7176-1, section 9.3
15,7°
DETERMINATION OF SIDEWAYS STATIC STABILITY
Tipping angle of wheelchair in the least stable configuration,
left side
Method of measurement: ISO 7176-1, section 10.2
22,9°
Tipping angle of wheelchair in the least stable configuration,
right side
Method of measurement: ISO 7176-1, section 10.2
22,9°
DETERMINATION OF STATIC STABILITY OF ANTI-TIP DEVICES
Rearward tipping angle of wheelchair in the least stable
configuration
Method of measurement: ISO 7176-1, section 11.2
22,3°
Forward tipping angle of wheelchair in the least stable
configuration
Method of measurement: ISO 7176-1, section 11.2
N/A
Do anti-tip devices prevent rearward tipping?
Méthode de mesure : ISO 7176-1, article 11.4
Yes
Do anti-tip devices prevent forward tipping?
Method of measurement: ISO 7176-1, section 11.4
N/A
Active stability control system
N/A
WHEELCHAIR MASS
Wheelchair total mass
Method of measurement:
BNQ 6645-001, table 10, line 10
71,6 lbs (32,55 kg)
Revision 0
July 2022

NEOXTM Dynamic
wheelchair
ENGLISH
14
DETERMINATION OF EFFECTIVENESS OF WHEEL LOCKS
Maximum slope angle, uphill
Method of measurement: ISO 7176-3, section 7.2
14,1°
Maximum slope angle, downhill
Method of measurement: ISO 7176-3, section 7.2
10,1°
REQUIREMENTS AND TEST METHODS FOR STATIC,
IMPACT AND FATIGUE STRENGHTS
The NeoxTM Dynamic wheelchair has successfully passed all ISO certifications and test
related to Static, Impact and Fatigue strengths requirements. The NeoxTM Dynamic
wheelchair complies with the requirements of ISO-7176-8.
RESISTANCE TO IGNITION OF POSTURAL SUPPORT DEVICES
(SEAT, BACKREST, ARMREST, FOOTREST KIT)
The NeoxTM Dynamic wheelchair is equipped with postural support devices (seat,
backrest, armrest, footrest kit) that are composed with a combination of fabrics and
foams that comply to the test requirements of CAL-117.
WHEELCHAIR FOR USE AS A SEAT IN A MOTOR VEHICLE
Declaration that this wheelchair model conforms with the requirements of ISO 7176-19
and is designed to be used in a forward-facing position when used as a seat in a motor
vehicle.
Types of tie-downs that are suitable for
the wheelchair (four-point strap type tie-
downs, wheel clamps, other types of
docking systems, etc.).
Four-point strap type tie-downs.
For more information, please consult the
Transport section of this manual.
Declaration that this wheelchair comes
equipped with securement points that are
fixed to the frame and has successfully
passed the testing requirements of ISO
7176-19.
The NeoxTM
: Dynamic wheelchair is
equipped with securement points that are
fixed to the frame, meeting the
requirements of ISO/DIS 7176-19:2019 and
has successfully passes a frontal impact
crash test with a medium sized, 76.3 kg
(170 lbs) crash test dummy. For more
information, please consult the Transport
section of this manual.

Owner’s Manual
ENGLISH
15
Rating of the ease of use of the motor vehicle’s three-point seat belt
as required by ISO 7176-19, section 5.5.a. Excellent
Rating to the degree to which the use of the motor vehicle’s three-
point seat belt adequately secures the occupant as required by ISO
7176-19, section 5.5.b
Excellent
Never remove the tie-down strap securement points that secure your wheelchair to a
motor vehicle. If the tie-down strap securement points are removed, they cannot be
replaced and your wheelchair will no longer comply with ISO/DIS 7176-19:19. For more
information, please consult the Transport section of this manual.
Note that ease of access and maneuverability in a motor vehicle can be greatly
diminished by the size of the wheelchair, and a smaller turning diameter generally
facilitate access to the vehicle and maneuverability in a forward-facing position. For
more information, please consult the Transport section of this manual
Use as a seat in a motor vehicle Yes. For more information, please consult
the Transport section of this manual.
Revision 0
July 2022

NEOXTM Dynamic
wheelchair
ENGLISH
16
3. Recommendations
WARNING
Do not use this equipment without having read and understood
this owner’s manual in its entirety. This booklet contains essential
information and instructions to ensure the safety of the occupant
and any other individual who is near the wheelchair.
Safety Inspection Checks
A thorough inspection of the wheelchair should be completed upon delivery, as
well as, at the intervals indicated in the Maintenance Checklist, to ensure the
wheelchair occupant’s safety.
 Verify upon delivery, that the wheelchair is assembled with all the
components selected in the order form and that no parts are missing or
damaged.
 Verify that the wheelchair rolls smoothly and functions normally.
 Make sure all parts operate without abnormal noises, vibrations, or irregular
movements. The presence of one of these conditions may indicate that the
propulsion wheels are deflated, that a part is not adequately fastened or that
the wheelchair has sustained damage.
 Make sure the propulsion wheels and caster wheels are firmly attached and
that no object interferes with their functional performance.
 Make sure tire pressure is adequate (with pneumatic tire option).
 Verify that wheel locks function effectively.
 Make sure anti-tips are securely attached and function as intended.
 Verify that both the seat and the backrest are stable and securely attached to
the frame.
 Make sure armrests are securely fastened and locked in place.
 Make sure footrests are adequately adjusted and securely fastened.
 Make sure the belt is firmly fixed to the frame and are adjusted to properly fit
the occupant.
 Ensure that no heavy object is attached to the backrest.

Owner’s Manual
ENGLISH
17
Safety Guidelines
Several safety measures must be taken to ensure the safety of the occupant and
the individuals who are near the wheelchair. The following list is not exhaustive. It
is the responsibility of every individual to remain cautious in all actions
undertaken.
 Never use a wheelchair without adequate tire pressure (with pneumatic tire
option).
 Do not attempt to reach for an object, if you must lean forward, sideways, or
backwards.
 Never attempt to surmount a tall obstacle, changes in height will affect the
stability of the wheelchair.
 Never transport more than one person in a wheelchair.
 Never attach objects to the backrest, except those provided with the
wheelchair.
 Never attempt to tilt the wheelchair without assistance.
 Never use the footrest as a platform, during a transfer or when attempting to
lift oneself.
 Never use detachable or removable parts to lift wheelchair. Always use the
rigid parts of the frame when lifting the wheelchair.
 Be careful not to pinch your fingers when installing a wheelchair component
or using a removable part.
 To ensure your safety onboard adapted transport, it is essential to use the
wheelchair’s identified securement points along with the vehicle’s Transport
Canada approved restraint system.
 Always be aware of your environment. Taking a few moments to familiarize
yourself with your surroundings, before using your wheelchair in a new
environment, will allow you to avoid obstacles and potential dangers.
 When attempting a new manoeuvre, if you are uncertain about the safest
way to proceed, it is important to ask for assistance to ensure your safety.
 Physipro Inc. strongly recommends the use of anti-tips. Anti-tips improve
safety by helping to prevent the wheelchair from accidentally tipping over,
therefore reducing the risk of falling and sustaining injuries.
Revision 0
July 2022

NEOXTM Dynamic
wheelchair
ENGLISH
18
General Warnings
Getting to know your wheelchair
• Each wheelchair is unique and thereby requires an initial period of adaptation. To
ensure the safe use of your wheelchair, we recommend that you follow the
instructions provided by your occupational therapist and allow yourself the
necessary time to become familiar with the different features and characteristics of
your wheelchair.
• Start with simple movements, such as leaning forward, grasping an object, and
performing a transfer. Do not hesitate to ask for assistance, especially during the
adaption period. Once you have determined the limits of your wheelchair, you will
be able to develop your own techniques.
Maximum load capacity
• Never exceed the maximum load capacity. The maximum load capacity is for the
combined weight of the occupant and the items being carried. Exceeding the
maximum load capacity increases the risk of losing control of your wheelchair,
tipping over, or falling and may result in serious injury to the occupant or other
individuals and may damage the wheelchair. (The maximum load capacity of your
wheelchair is indicated in the Technical Specifications section).
•Never transport more than one person in a wheelchair. The wheelchair was
designed for one person only.
Surrounding environment
•This wheelchair was designed for use on smooth surfaces such as asphalt, concrete,
or interior flooring. Do not use your wheelchair on rough terrain or unstable
surfaces like sand, mud, snow, or ice. Manoeuvring the wheelchair in these
conditions, increases the risk of losing control, tipping over, or falling and may
result in serious injury to the occupant or other individuals and may damage the
wheelchair.
•Be extremely cautious when you must move on a wet or icy surface. If in doubt of
the safest way to proceed, do not hesitate to ask for assistance.
•Never use your wheelchair in a swimming pool, a shower or other watery area.
•Avoid exposing your wheelchair to excess moisture. For example, do not leave your
wheelchair in the bathroom while taking a shower or a bath.
•Always dry your wheelchair if wet or after cleaning.
•Avoid exposing your wheelchair to extreme temperatures to prevent
hypothermia (frostbite) or burns. The surfaces of the wheelchair can become
frigid when exposed to cold temperatures or burning hot if left in excessive heat
or direct sunlight.

Owner’s Manual
ENGLISH
19
Sports and weight training
•Our wheelchairs are not designed for use during the practice of sports or weight
training. Weightlifting may damage the wheelchair by exceeding the maximum
load capacity and will void the warranty.
Street use
Physipro Inc. wheelchairs are designed primarily for residential use. Use on public
roads is strongly discouraged. If you must use your wheelchair on a public road, the
following warnings and precautions must be observed.
•Be aware that because of the low position of your wheelchair, motorists may have
difficulty seeing you. It is therefore important to always establish eye contact with
the driver before moving in a parking lot or on a public road. Always yield to the
motorist if you are not sure of their intentions.
•Reflective safety stickers are available as an option. These stickers must be affixed
to the wheelchair by the occupant or an attendant if you plan to use your
wheelchair at night or in poor lighting conditions. Wearing reflective clothing is
also advised.
•When moving on a public road, be extremely careful and pay close attention to the
dangers and obstacles on the road, such as potholes and uneven or cracked
surfaces.
•Never engage on roads with heavy traffic.
Assisting a wheelchair occupant
•Check with a qualified professional on the best methods and techniques to adopt
to safely assist a wheelchair occupant.
•Ensure that the push handles are well-adjusted and securely fastened. Inspect the
handle grip covers, the grip covers should not slide on the push handles and must
not show signs of wear and tear.
•Always engage wheel locks when occupant is left alone.
•Never use detachable or removable parts to lift the wheelchair, these parts may
detach and cause injury to the occupant or yourself. Always use the rigid parts of
the frame to lift the wheelchair.
•Always maintain a good posture when lifting or tilting the wheelchair. Remember
to keep your back straight and to bend your knees when lifting.
WARNING
Failure to observe these warnings and precautions increases the risk of
losing control of the wheelchair, tipping over, or falling and may result in
serious injury to the occupant or other individuals and may damage the
wheelchair.
Revision 0
July 2022

NEOXTM Dynamic
wheelchair
ENGLISH
20
Warnings: Falls and Tips
This section contains essential information to prevent the risk of falling and/or
tipping. It is important to observe all the precautions and follow the instructions
listed. We strongly recommend that you always fasten your pelvic positioning belt
for added protection.
Changing clothes
When getting dressed, make sure that the front caster wheels are pointing forward
and that the wheel locks are engaged. If the wheelchair is not equipped with anti-tips,
place the back of your wheelchair against a wall.
Grabbing an item, bending over, or leaning
Be aware that the center of balance of your wheelchair will be affected when you
shift your body position. Bending or leaning over to grab an item modifies your
wheelchair’s center of balance and decreases stability.
Certain precautions must be taken to proceed securely.
• Place your wheelchair parallel and as near as possible to the desired item, with the
front caster wheels pointed forward. To correctly position the wheelchair, move your
wheelchair forward, slightly beyond the item you want to obtain than move your
wheelchair backwards along the item, the front caster wheels will point forward and
the distance between you and the item will be reduced. Never block the propulsion
wheels, doing so will create a tipping point and increase the risk of tipping over
and/or falling.
• Make sure you are seated as far back as possible on your seat, with your back
leaning into the backrest.
• Reach your arm out to the side to grasp the item with one hand, while keeping the
opposite hand on the handrim or armrest.
• Ask for help if the item is out of reach or use a reaching aid.
WARNING
Never attempt to grab an item that is out of reach, if you must lift
yourself up, move forward on your seat, bend or lean sideways, forwards,
or backwards, you will modify the center of balance of your wheelchair
and increase the risk of tipping over and/or falling, which may lead to
serious injury to yourself or damage the wheelchair.