Planet VCG-1500WG-LTE User manual

– 1 – – 2 –
– 3 – – 4 –
1. Package Contents
Thank you for choosing PLANET Vehicle 4G LTE Cellular Gateway.
Open the box of the Cellular Gateway and carefully unpack it. The
box should contain the following items:
VCG-1500WG-LTE x 1
Quick Installation Guide x 1
4G LTE Antenna x 1
2.4G Wi-Fi Antenna x 2
GPS Antenna x 1
Ethernet Cable x 1
Console Cable x 1
Mounting Kit x 1
Power Kit x 1
Antenna Dust Cap x 4
Copper Dust Cap x 6
Note
If there is any item missing or damaged, please
contact the seller immediately.
2. Physical Introduction
Front Panel
PWR WiFi 3G 4G Internet Ejector SIM TF1 TF2
WiFiWiFi
VCG-1500WG-LTE
Vehicle 4G LTE Cellular Wireless Gateway
Rear Panel
3G/4G GPS
Reset
DC 5~32V USB Console 4 3 2 1 WAN
BAT
GND
ACC
GND
ACT
LNK
LED and button denitions
LED Color Function
PWR Red Lights to indicate that the gateway is
operating.
WiFi Blue Lights to indicate that the Wi-Fi is working.
The Wi-Fi is enabled by default.
3G Blue Lights to indicate that the SIM card is
detected via 3G.
4G Blue Lights to indicate that the SIM card is
detected via 4G.
Internet Blue Lights to indicate that the gateway is
connecting to the Internet.
Button Function
Ejector This button is used to eject the SIM card adapter.
Reset
This button is used to restore all the factory default
settings. Please hold the reset button for about 5
seconds to load default.
Interface Description
Power Jack
The standard 4-pin vehicle power jack comes with
the input power of 5-32V DC.
Use the power adapter included in the package or
connect to vehicle battery directly.
SIM Slot Insert the SIM card adapter with SIM card.
TF1/TF2
Slot
Store broadcast advertisements for Wi-Fi
authentication.
USB Port Connect with external storage.
Console
Port The port is for testing or debugging.
3. Hardware Installation
Step 1. Insert SIM card adapter into gateway SIM card slot.
Note
A mini card with LTE and WCDMA subscription.
Step 2. Connect 4G LTE antenna, Wi-Fi antennas and GPS antenna
to specied connectors.
Step 3. Power on the gateway.
Step 4. Connect LAN port of the Gateway with PC to congure
parameters and desired function.
Note
1. It is necessary to power off the gateway before
you insert or remove the SIM card.
2. Before inserting the SIM card adapter into SIM
slot, please make sure the SIM card with metal
point is facing down.

– 6 – – 7 –
Default IP Address: 192.168.1.1
Default port number: 9999
Default Username: admin
Default Password: admin
3. When you log in the Web Interface successfully, the main page
appears as the following picture shows.
4. Web Management
The following shows how to start up the Web Management of the
Cellular Gateway.
Note the Cellular Gateway is congured through an Ethernet
connection. Please make sure the manager PC must be set to the
same IP subnet address.
For example, the default IP address of the Cellular Gateway is
192.168.1.1, then the manager PC should be set to 192.168.1.x
(where x is a number between 2 and 254), and the default subnet
mask is 255.255.255.0
PC / Workstation with Web
Browser 192.168.1.x
RJ45/UTP Cable
IP Address:192.168.1.1
VCG-1500WG-LTE
IP Management Diagram
 Logging in to the Cellular Gateway
1. Use Internet Explorer 8.0 or above Web browser and enter
default IP address http://192.168.1.1:9999 to access the Web
interface.
2. After entering the http://192.168.1.1:9999 the following
dialog box will appear. Please enter the default user name and
password “admin”.
5. Further Information
The above steps introduce the simple installations of the
VCG-1500WG-LTE. For further details on the installation of the
cellular gateway, please refer to the user manual which can be
downloaded from PLANET website.
https://www.planet.com.tw/en/support/downloads?method=category
&c1=network-security&p=vcg-1500wg-lte&type=3
If you have further questions, please contact the local dealer or
distributor where you purchased this product or you can contact
PLANET directly at the following email address:
[email protected]
2011-B90250-000
– 5 –