Planet ICG-2420-LTE User manual

Industrial 4G LTE Cellular Gateway
ICG-2420-LTE
Quick Installation Guide

Table of Contents
1. Package Contents ....................................................................... 3
2. Requirements............................................................................. 4
3. Starting Web Management .......................................................... 5
4. Terminal Setup........................................................................... 8
4.1. Logon to Console ................................................................. 9
4.2.ConguringIPAddress ......................................................... 9
5. RecoveringBacktoDefaultConguration ....................................11
6. Customer Support .....................................................................12

3
1. Package Contents
Thank you for purchasing PLANET Industrial 4G LTE Cellular Gateway.
Please refer to the table list below for the two models used in Europe
andtheU.S.:
ModelName 4GLTE
FDD TDD
ICG-2420-LTE-EU B1/B3/B5/B7/B8/B20 B38/B40/B41
ICG-2420-LTE-US B2/B4/B12
Note
Pleasecontactyourcellularcarrierformoredetailsabout
LTEbandsupport.
“Cellular Gateway” is used as an alternative name in this Quick
InstallationGuide.
Open the box of the Cellular Gateway and carefully unpack it. The box
shouldcontainthefollowingitems:
ICG-2420-LTE QuickInstallationGuide AntennaDust Caps
DIN-railKit 4GLTEAntennas(2dBi) 1.5m RJ45 Cable
If any item is found missing or damaged, please contact your local
reseller for replacement.

4
2. Requirements
 Workstations running Windows 10/XP/2003/Vista/7/8/2008, MAC OS
X or later, Linux, UNIX, or other platforms are compatible with TCP/
IPprotocols.
 Workstations are installed with Ethernet NIC (Network Interface
Card)
Ethernet Port Connection
¾Network cables -- Use standard network (UTP) cables with RJ45
connectors.
¾The above PC is installed with Web browser and JAVA runtime
environmentplug-in.
Note
It is recommended to use Internet Explore 8.0 or above
to access the Cellular Gateway. If the Web interface of
the Cellular Gateway is not accessible, please turn off
theanti-virussoftwareorfirewallandthentryitagain.
Serial Port Connection (Terminal)
¾The above Workstations come with COM Port (DB9) or USB-to-
RS232 converter.
¾The above Workstations have been installed with terminal
emulator,suchasHyperTerminalincludedinWindowsXP/2003.
¾Serialcable-- one endisattached totheRS232 serial port,while
theotherendtotheconsoleportoftheCellularGateway.

5
3. Starting Web Management
The following shows how to start up the Web Management of the
Cellular Gateway. Note the Cellular Gateway is congured through an
Ethernet connection. Please make sure the manager PC must be set to
the same IP subnet address.
For example, the default IP address of the Cellular Gateway is
192.168.1.1, then the manager PC should be set to 192.168.1.x
(where x is a number between 2 and 254), and the default subnet
maskis255.255.255.0.
IP Address:
192.168.1.1
PC / Workstation with Web
Browser 192.168.1.x
RJ45/UTP Cable
ICG-2420-LTE
Figure 3-1: IP Management Diagram
Logging in to the Cellular Gateway
1.Use Internet Explorer 8.0 or above Web browser and enter IP
address http://192.168.1.1 (the factory default IP address or
the one that you have just changed in console) to access the Web
interface.

6
2.After entering the http://192.168.1.1 the main screen appears as
Figure3-2shows.
Figure 3-2: Web-based Main Screen of Cellular Gateway
3.When any function item is pressed, the following dialog box will
appear. Please enter the default user name and password “admin”
(orthepassword youhavechangedviaconsole).
DefaultIPAddress:192.168.1.1
DefaultUsername:admin
DefaultPassword:admin
Figure 3-3: Login Screen

7
TheCellularGatewayMenuontheleft of theWebpageletsyouaccess
allthecommands andstatisticstheCellularGatewayprovides.
Figure 3-4: Cellular Gateway Menu
Now, you can use the Web management interface to continue the
Cellular Gateway management or manage the Cellular Gateway by
console interface. Please refer to the user’s manual for more.

8
4. Terminal Setup
It is optional for you to congure the system by connecting a serial
cable (not included in the package) to a COM port on a PC or
notebookcomputerandtotheserialportoftheCellularGateway.
ICG-2420-LTE
COM1
115200, N, 8, 1
PC/Workstation with
Terminal Emulation Software
Serial Port
RS232 DB9 Cable
Figure 4-1: Cellular Gateway Console Connectivity
A terminal program is required to make the software connection to the
CellularGateway.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port
shouldbecongured as:
Baud:115200
Databits:8
Parity:None
Stopbits:1
Flowcontrol:None
Figure 4-2: COM Port Conguration

9
Important
Users must use the Null-Modem
cable directly connected to the
Cellular Gateway. The Null-Modem
DB9 connector shown in the
picturemustbeused.
4.1. Logon to Console
Once the terminal is connected to the device, power on the Cellular
Gateway, and the terminal will display “running testing procedures”.
Then, the following message asks to log-in user name and password.
The factory default user name and password are shown as follows and
theloginscreeninFigure4-3appears.
Username:admin
Password:admin
Figure 4-3: Cellular Gateway Console Login Screen
The user can now enter commands to manage the Cellular Gateway.
For a detailed description of the commands, please refer to the
followingchapters.
Note
1. For security reason, please change and memorize the new
password after this rst setup.
2. Only accept command in lowercase letter under console
interface.
4.2.ConguringIPAddress
TheCellularGatewayisshippedwithdefaultIPaddress shownbelow.

10
IPAddress:192.168.1.1
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the
CellularGateway,pleaseusetheproceduresasfollows:
 ShowthecurrentIPAddress
1.Atthe“#”prompt,enter“lan ipv4 ip list”.
2.ThescreendisplaysthecurrentIPaddressasshown inFigure4-4.
Figure 4-4: IP Information Screen
 ConguringIPAddress
3.At the “#” prompt, enter the following command and press
<Enter> asshowninFigure4-5.
CellularGateway#lan ipv4 ip addr 192.168.1.3
CellularGateway#lan ipv4 ip apply
The previous command would apply the following settings for the
CellularGateway.
IPAddress:192.168.1.3
SubnetMask:255.255.255.0
Figure 4-5: Conguring IP Address Screen
4.RepeatStep1tocheckiftheIPaddresshaschanged.