Planet IXT-900 POE Series User manual

Industrial 10GBASE-X SFP+ + 10GBASE-T
802.3bt PoE++
Managed Media Converter
IXT-900 PoE Series
Quick Installation Guide

Table of Contents
1. Package Contents................................................................................. 3
2. Requirements....................................................................................... 4
3. Wiring DC Power Inputs........................................................................ 5
3.1 Grounding the Device..................................................................... 6
4. Starting Web Management .................................................................... 7
4.1 Logging in to the Industrial Managed PoE Media Converter .............. 8
 4.2 SavingCongurationviaWebInterface ......................................... 10
5. SSH Login ......................................................................................... 11
 5.1 ConguringIPAddress ................................................................. 12
 5.2 SavingtheCurrentConguration .................................................. 13
6. RestoringDefaultConguration ........................................................... 14
7. Customer Support .............................................................................. 15

3
1. Package Contents
Thank you for purchasing PLANET Industrial 10GBASE-X SFP++ 10GBASE-T
802.3bt PoE++ Managed Media Converter, IXT-900 PoE Series. In this guide,
the term “Industrial Managed PoE Media Converter” refers specically to
theIXT-900-1X1UPandIXT-900-2X1UPmodels.
To begin, open the box of the Industrial Managed PoE Media Converter and
carefullyunpackitscontents.Theboxshouldcontainthefollowingitems:
ModelNumber
Contents IXT-900-1X1UP IXT-900-2X1UP
Industrial Managed PoE Media Converter  
Quick Start Guide Sheet  
DIN-railKit  
Wall-mountKit  
SFPDustCap 1 2
RJ45 Dust Cap 1 1
If any of these items are missing or damaged, please contact your dealer
immediately. If possible, keep the carton and original packing materials to
repacktheproductintheeventthatyouneedtoreturnittousforrepair.

4
2. Requirements
The Industrial Managed PoE Media Converter provides a remote web interface
for management purposes. To further manage the device, you will need the
followingproducts.
zWorkstations running Windows 7/8/10/11, mac OS 10.12 or later, Linux
Kernel 2.6.18 or later, or other modern operating systems are compatible
with TCP/IP Protocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard).
zEthernet Port Connection
Network cables -- Use standard network (UTP) cables with RJ45
connectors.
The PC mentioned above is installed with a Web browser such as
GoogleChrome,MozillaFirefoxorMicrosoftEdge.
It is recommended to use Google Chrome, Microsoft Edge or
FirefoxtoaccesstheIndustrialManagedPoEMediaConverter.
If you are unable to access the Web interface of the Managed
PoE Media Converter, try turning off your anti-virus software or
firewallandthentryagain.

5
3. Wiring DC Power Inputs
The 6-contact terminal block connector on the panel of the Industrial Managed
PoE Media Converter is used for two DC redundant power inputs. Follow the
steps below to insert the power wires.
1. Insert positive/negative DC power wires into Contacts 1/2 for Power 1, or
Contacts5/6forPower2.
Max. Fault Alarm Loading: 24V, 1A
DC Input:
12-54V , 6.5A max.
V1+ V2+
PWR1 Alarm PWR2
1 2 3 4 5 6
Figure 3-1: IXT-900 PoE Series Upper Panel
2.Tightenthewire-clampscrewsforpreventingthewiresfromloosening.
123456
V1+ V2+ V2+ V2-
Power 1 Power 2
Figure 3-2: Power 1 & 2 Pins of Terminal Block Connector

6
1.The wire gauge for the terminal block should be in the range
from12 to 24 AWG.
2.Please check the wire AWG Ampere specification before
connectingPLANETIndustrialManagedPoEMediaConverter.
PWR1 and PWR2 must provide the same DC voltage while
operating with dual power input.
3.1 Grounding the Device
Users MUST complete grounding wiring with the device; otherwise, a sudden
lightningcouldcausefataldamagetothedevice.
Max. Fault Alarm Loading: 24V, 1A
DC Input:
12-54V , 6.5A max.
V1+ V2+
PWR1 Alarm PWR2
1 2 3 4 5 6
Earth Ground
Figure 3-3:IXT-900-2X1UP

7
4. Starting Web Management
The following steps show how to start up the Web Management for the
PoE Managed Media Converter. Note that the Industrial Managed PoE Media
Converter is congured through an Ethernet connection, so ensure that the
manager PC is set to the same IP subnet address.
For example, if the default IP address of the PoE Managed Media Converter
is 192.168.0.100, then the manager PC should be set to an IP address of
192.168.0.x (where x is a number between 1 and 254, except 100), and the
defaultsubnetmaskis255.255.255.0.
RJ45/UTP Cable
PLANET Managed
Media Converter
PC/Workstation with
Chrom, Edge or Firefox browser

8
4.1 Logging in to the Industrial Managed PoE Media Converter
1.Use a modern Web browser to enter the default IP address
https://192.168.0.100toaccesstheWebinterface.
2.To access the main screen of IXT-900 PoE series, enter the default user-
name “admin” and password “admin” (or the password you previously
changed) when the login screen appears. Then, click “Login”. The login
screenisshowninFigure4-1.
DefaultIPAddress:192.168.0.100
DefaultAccount:admin
DefaultPassword:admin
Figure 4-1: Web Login Screen of Industrial Managed PoE Media Converter
After entering the username and password, the main web screen will appear,
asinFigure4-2,onceloggedin.
Figure 4-2: Web Main Screen of Industrial Managed PoE Media Converter
(Use IXT-900-2X1UP as a representative)

9
The menu at the top of the web page provides access to all the commands
and statistics oered by the Industrial Managed PoE Media Converter. Each
menucontainssub-menuitems,asshowninFigures4-3&4-4below.
Figure 4-3: Main Menu
Figure 4-4: Sub-menu
You can now use the web management interface to continue managing the
Industrial Managed PoE Media Converter. For more information, please refer to
the user’s manual.
For security reasons, change and memorize the new pass-
word after the first setup.

10
4.2 SavingCongurationviaWebInterface
Save all applied changes and set the current conguration as the startup
conguration after nishing the conguration. The system will automatically
loadthestartup-congurationleuponreboot.
1. Click the Save icon on the top Menu bar.
Press the “Apply”buttontosavetheconguration.
Figure 4-5: Click the “Save Conguration” icon
2.Another way to save the settings is to click Maintenance and then select
SaveConguration.
Figure 4-6: Select “Save Conguration” from sub-menu