Planet UM-560 User manual

UM-560 Installation Guide for Windows
2000
1. When the USB V.90 Fax/Modem is well
connected to your computer, Windows 2000 will
automatically detect the new device. Click Next.
2. Select Search for a suitable driver for my
device (recommended) and click Next.
3. Insert the new device driver compact disc into the
CD-ROM drive. Select Specify a location and
click Next.

4. Click Browse button and select E:\WIN2K.
Click OK. Windows will start searching for the
appropriate driver for the software installation.
5. Click Next to continue.
6. Click Yes.

7. Click Finish. The software installation is
successfully completed.
8. Restart your computer to activate the new device.

Setup Diagnostics
To verify whether your USB V.90 Fax/Modem exists
in your computer and is enabled, go to My
Computer→Control Panel → System. Click the
Device Manager tab. If the Modem and Network
adapters are found, it means that your Network
device is well installed. If not, consult your computer
dealer for technical support.

UNINSTALLATION
To uninstall the device driver of USB V.90
Fax/Modem, perform the following steps.
1. Go to My Computer→Control Panel. Double-
click Add/Remove Programs.
2. Select Uninstall USB V.90 FAX MODEM.
Click the Add/Remove button. And click OK.
3. For Windows 2000, the following dialog box
will appear after you double-click the
Add/Remove Programs.

4. Follow the on-screen instructions to finish.