Planet FNSW-2400PS User manual

User's Manual
FNSW-2400PS
24-Port 10/100Mbps
POE Web Smart Ethernet Switch

User’s Manual of FNSW-2400PS
Trademarks
Disclaimer
FCC Warning
CE Mark Warning
Energy Saving Note of the Device
WEEE Warning
Revision
FOR MODEL:
REVISION:
Part No.:

User’s Manual of FNSW-2400PS
TABLE OF CONTENTS
1. INTRODUCTION ...............................................................................6
2. HARDWARE DESCRIPTION ............................................................10
3. SWITCH MANAGEMENT .................................................................14
4. WEB MANAGEMENT........................................................................16

User’s Manual of FNSW-2400PS
5. SWITCH OPERATION......................................................................61
6. POWER OVER ETHERNET OVERVIEW..............................................63
7. THE POE PROVISION PROCESS ......................................................65

User’s Manual of FNSW-2400PS
8. TROUBLESHOOTING.......................................................................67
APPENDIX A NETWORKING CONNECTION..........................................68

User’s Manual of FNSW-2400PS
1. INTRODUCTION
1.1 Checklist
Check the contents of your package for following parts:
“POE Web Smart Ethernet Switch”
“switch”
1.2 About the Switch

User’s Manual of FNSW-2400PS
1.3 Features
Physical Port
PoE
Layer 2 Features
VLAN
Link Aggregation
Spanning Tree Protocol
Quality of Service
Multicast
Security

User’s Manual of FNSW-2400PS
Management
1.4 Specification
Model FNSW-2400PS
Hardware Specification
Ports
Switch Processing Scheme
Throughput (packet per second)
Switch Fabric
Address Table
Share Data Buffer
Flow Control
Dimensions (W x D x H)
Weight
Power Requirement
Power Consumption / Dissipation
Smart Function
System Configuration
Port Configuration
Bandwidth Control
Broadcast Storm Control
Port Statistics
VLAN
Spanning Tree Protocol

User’s Manual of FNSW-2400PS
Port Trunking
Port Mirroring
QoS
MAC Address / TCP & UDP Filter
IGMP Snooping v1 / v2
Power over Ethernet
PoE Standard
PoE Power Supply Type
PoE Power output
Power Pin Assignment
PoE Power Budget
Standards Conformance
Regulation Compliance
Standards Compliance
Environment
Temperature
Humidity Operating

User’s Manual of FNSW-2400PS
2. HARDWARE DESCRIPTION
2.1 Front Panel
Figure 2-1:
2.1.1 LED Indicators
System
LED Color Function
PWR Green Lights
Per 10/100Base-TX, PoE interfaces (Port-1 to Por-24)
LED Color Function
Lights
LNK/ACT Green Blink:
Lights
PoE In-Use Orange OFF:
2.2 Rear Panel
Figure 2-2:

User’s Manual of FNSW-2400PS
Power Notice:
2.
2.3 Hardware Installation
2.3.1 Desktop Installation
Step 1
Step 2
Step 3
Step 4
A.
B.
Appendix A
Step 5
A.
B.

User’s Manual of FNSW-2400PS
2.3.2 Rack Mounting
19-inch
Step 1
Step 2
Figure 2-3
Step 3
Step 4
Step 5

User’s Manual of FNSW-2400PS
Figure 2-4
Step 6 2.3.1 Desktop Installation

User’s Manual of FNSW-2400PS
3. SWITCH MANAGEMENT
3.1 Overview
3.2 Management Method
3.2.1 Web Management
192.168.0.100
“admin”
192.168.0.100
admin
admin

User’s Manual of FNSW-2400PS
3.3 Logging on to the FNSW-2400PS
admin
Figure 3-1

User’s Manual of FNSW-2400PS
4. WEB MANAGEMENT
192.168.0.100 Web
4.1 Login in to the Switch
"admin”.
Figure 4-1
Fast Ethernet Port Link Status
Main Functions Menu
Figure 4-2 M
a
in
Sc
r
ee
n

User’s Manual of FNSW-2400PS
Administrator: Explained in section 4.2.
Port Management: Explained in section 4.3.
VLAN Setting: Explained in section 4.4.
QoS Setting: Explained in section 4.5.
Security: Explained in section 4.6.
Spanning Tree: Explained in section 4.7
Trunking: Explained in section 4.8.
DHCP Relay Agent: Explained in section
4.9.
Backup/Recovery: Explained in section 4.10.
Miscellaneous: Explained in section 4.11.
SNMP Settings: Explained in section 4.12.
Save Settings: Explained in section 4.13.
Logout: Explained in section 4.14.
4.2 Administrator
Figure 4-3

User’s Manual of FNSW-2400PS
O
Object Description
System Information Explained in section
4.2.1.
IP Configuration Explained in
section 4.2.2.
Password Setting Explained in
section 4.2.3.
Factory Default Explained in section
4.2.4.
Firmware Update Explained in
section 4.2.5.
Reboot Explained in section 4.2.6.
Table 4-1
4.2.1 System Information
“Update”
Figure 4-4
Object Description
MAC Address
Device Description
Software Version
Idle Time Security
Table 4-2

User’s Manual of FNSW-2400PS
4.2.2 IP Configuration
Figure 4-5
Object Description
IP Address
192.168.0.100
Subnet Mask
255.255.255.0
Gateway
192.168.0.254
IP Configure
static DHCP
Table 4-3

User’s Manual of FNSW-2400PS
4.2.3 Password Setting
Figure 4-6
Object Description
Username
Password
Confirm
Table 4-4
4.2.4 Factory Default
Figure 4-7