Planet IGS-1000 Series User manual

Industrial Ethernet Switch
IGS-1000 Series
User’s Manual

Table of Contents
1. Package Contents................................................................................. 3
2. Hardware Introduction .......................................................................... 5
2.1 Switch Front Panel......................................................................... 5
2.2 LED Indicators............................................................................... 6
2.3 Switch Upper Panel........................................................................ 7
2.4 Wiring the Power Inputs................................................................. 8
2.5 Wiring the Fault Alarm Contact ..................................................... 10
2.6 Grounding the Device................................................................... 11
3. Installation ........................................................................................ 12
3.1 DIN-rail Mounting Installation ....................................................... 12
3.2 Wall-mount Plate Mounting ........................................................... 13
4. ProductSpecications ......................................................................... 14
Customer Support.................................................................................... 17

3
1. Package Contents
Thank you for purchasing PLANET IGS-1000-8T4X and IGS-1000-8UP4X
Industrial Ethernet Switches. The descriptions of this IGS-1000 series are
as follows:
IGS-1000-8T4X Industrial 8-Port 10/100/1000T + 4-Port 10G SFP+
Ethernet Switch (-40~75 degrees C)
IGS-1000-8UP4X Industrial 8-Port 10/100/1000T 802.3bt PoE + 4-Port 10G
SFP+ Ethernet Switch (-40~75 degrees C)
Thehardwarespecicationsofthesemodelsareshownbelow:
Model
Name
Item
10/100/1000T
RJ45 Ports
1G/2.5G/10GX
SFP+ Slots PoE Ports Power Input Range
IGS-1000-8T4X 8 4 -- DC 9~48V
IGS-1000-8UP4X 8 4 8 x 802.3bt DC 48~54V
In the following sections, the term “Industrial Ethernet Switch” refers to
the IGS-1000-8T4X or IGS-1000-8UP4X.

4
Open the box of the Industrial Ethernet Switch and carefully unpack it. The
box should contain the following items:
Industrial Ethernet
Switch x 1 QR Code Sheet x 1 Wall-mount Kit x 1
Let’s get started with your PLANET product
IGS-1000-8T4X
EN Please scan the QR code to browse our online User’s Manual or Quick
Installation Guide and follow the instructions to complete the setup.
User's Manual
DE
Bitte scannen Sie den QR Code sie werden per Browser zur
Bedienungsanleitung oder Schnellanleitung weiter geleitet. Folgen Sie den
Anweisungen um die Installation abzuschließen.
FR
Veuillez scanner le code QR pour obtenir notre Notice d’Utilisation en
ligne ou notre Guide d’Installation Rapide et suivez les instructions pour
compléter la conguration
ES
Escanee el código QR para encontrar el Manual del Usuario en línea o
la Guía de Instalación Rápida y siga las instrucciones para completar la
conguración.
IT Scansiona il codice QR per consultare online il Manuale utente o la Guida di
installazione rapida e segui le istruzioni per completare la congurazione.
PT Por favor, escaneie o QR code para navegarno Manual do Usuário ou Guia
de Instalação Rápida. Siga as instruções para completar a conguração.
PL
Zeskanuj kod QR, aby otworzyć naszą internetową instrukcję obsługi
lub instrukcję szybkiej instalacji. Postępuj zgodnie z instrukcjami, aby
zakończyć poprawną kongurację.
RU
One word modify: Отсканируйте QR-код, чтобы просмотреть наше
онлайн-руководство пользователя или руководство по быстрой
настройке, и следуйте инструкциям для завершения настройки
RO Te rugam sa scanezi codul QR, pentru a descarca User’s Manual sau Quick
Installation Guide si a urmari instructiunile necesare in nalizarea instalarii
AR
Need more help?
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Technical Support: [email protected]
Copyright © PLANET Technology Corp. 2024.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Part No. 2360-AH7080-000
DIN-rail Kit x 1 RJ45 Dust Cap x 8 SFP Dust Cap x 4
If any of these are missing or damaged, please contact your dealer
immediately; if possible, retain the carton including the original packing
material, and use them again to repack the product in case there is a need to
return it to us for repair.

5
2. Hardware Introduction
2.1 Switch Front Panel
The front panels of the Industrial Ethernet Switch series consist of
Ethernet interfaces and LED indicators as shown below:
AlarmP2P1
IGS-1000-8T4X
1
3
5
7
2
4
6
8
1000 LNK/ACT
10/100 LNK/ACT
1G/2.5G
10G
LNK/ACT
LNK/ACT
9
10
11
12
AlarmP2P1
IGS-1000-8UP4X
802.3bt PoE++
360W
PoE Usage
270W
180W
90W
1
3
5
7
2
4
6
8
1000 LNK/ACT
10/100 LNK/ACT
bt PoE-in-Use
at PoE-in-Use
9
10
11
12
1G/2.5G
10G
LNK/ACT
LNK/ACT
Figure 2-1: IGS-1000-8T4X front
panel
Figure 2-2: IGS-1000-8UP4X front
panel

6
Gigabit TP Interfaces (Port 1 to Port 8)
Eight 10/100/1000BASE-T RJ45 copper interfaces come with 802.3bt PoE++
type 4 injector function (For IGS-1000-8UP4X)
10Gigabit SFP+ Slots (Port 9 to Port 12)
Four 1G/2.5G/10GBASE-X SFP+ slots
2.2 LED Indicators
IGS-1000-8T4X
System
LED Color Function
P1 Green Lights: Indicates power 1 has power.
P2 Green Lights: Indicates power 2 has power.
Alarm Red Lights: Indicates either power 1 or power 2 has no power.
10/100/1000Mbps RJ45 PoE++ Ports (Port 1 to Port 8)
LED Color Function
1000
LNK/ACT Green
Lights: To indicate the port is running at 1000Mbps and
successfully established.
Blinks: To indicate that the switch is actively sending or
receiving data over that port.
10/100
LNK/ACT Amber
Lights: To indicate the port is running at 10/100Mbps
and successfully established.
Blinks: To indicate that the switch is actively sending or
receiving data over that port.
10GBASE-X SFP+ Interfaces (Port 9 to Port 12)
LED Color Function
1G/2.5G
LNK/ACT Green
Lights: To indicate the port is running at 1000Mbps or
2500Mbps and successfully established.
Blinks: To indicate that the switch is actively sending or
receiving data over that port.
10G
LNK/ACT Amber Lights: To indicate the port is running at 10Gbps and successfully established.

7
PoE Usage LED (For IGS-1000-8UP4X)
LED Color Function
360W Amber Blinks: To indicate the system consumes close to 360-watt
PoE power budget
270W Amber Lights: To indicate the system consumes over 270-watt
PoE power budget
180W Amber Lights: To indicate the system consumes over 180-watt
PoE power budget
90W Amber Lights: To indicate the system consumes over 90-watt PoE
power budget
GS-1000-8UP4X
System
LED Color Function
P1 Green Lights: Indicates power 1 has power.
P2 Green Lights: Indicates power 2 has power.
Alarm Red Lights: Indicates either power 1 or power 2 has no power.
10/100/1000Mbps RJ45 PoE++ Ports (Port 1 to Port 8)
LED Color Function
1000
LNK/ACT Green
Lights: To indicate the port is running at 1000Mbps and
successfully established.
Blinks: To indicate that the switch is actively sending or
receiving data over that port.
10/100
LNK/ACT Amber
Lights: To indicate the port is running at 10/100Mbps
and successfully established.
Blinks: To indicate that the switch is actively sending or
receiving data over that port.
PoE-in-
Use
(For IGS-
1000-
8UP4X)
Green
Lights: To indicate the PoE port is working in 4-pair
PoEmode(End-span+Mid-span)andoersupto95
watts of power.
Amber
Lights: To indicate the PoE port is working in 802.3at
PoE+mode(End-spanormid-span)andoersupto36
watts of power.

8
10GBASE-X SFP+ Interfaces (Port 9 to Port 12)
LED Color Function
1G/2.5G
LNK/ACT Green
Lights: To indicate the port is running at 1000Mbps or
2500Mbps and successfully established.
Blinks: To indicate that the switch is actively sending or
receiving data over that port.
10G
LNK/ACT Amber Lights: To indicate the port is running at 10Gbps and successfully established.
PoE Usage LED (For IGS-1000-8UP4X)
LED Color Function
360W Amber Blinks: To indicate the system consumes close to 360-watt
PoE power budget
270W Amber Lights: To indicate the system consumes over 270-watt
PoE power budget
180W Amber Lights: To indicate the system consumes over 180-watt
PoE power budget
90W Amber Lights: To indicate the system consumes over 90-watt PoE
power budget
2.3 Switch Upper Panel
The upper panel of the Industrial Ethernet Switch consists of one terminal
block connector within two power input.
Figure 2-3 shows the upper panel of the IGS-1000-8T4X.
PWR1 Alarm PWR2
V1+ V2+
Max. Fault Alarm Loading: 24V, 1A
DC Input: 9-48V , 2A max.
AC Input: 24V
, 0.8A max.
1 2 3 4 5 6
Figure 2-3: IGS-1000-8T4X Upper Panel.

9
Figure 2-4 shows the upper panel of the IGS-1000-8UP4X.
DC Input:
48-54V , 8A max.
Dual power input is required
for maximum PoE loading.
Refer to user’s manual for
more details.
PWR1 Alarm PWR2
V1+ V2+
Max. Fault Alarm Loading: 24V, 1A
1 2 3 4 5 6
Figure 2-4: IGS-1000-8UP4X Upper Panel
2.4 Wiring the Power Inputs
The 6-contact terminal block connector on the top panel of Industrial Ethernet
Switch is used for two DC redundant power inputs. Please follow the steps
below to insert the power wire.
When performing any of the procedures like inserting the wires
or tightening the wire-clamp screws, make sure the power is
OFF to prevent from getting an electric shock.
1. Insert positive and negative DC power wires into Contacts 1 and 2 for
Power 1, or Contacts 5 and 6 for Power 2.
PWR1 Alarm PWR2
V1+ V2+
Max. Fault Alarm Loading: 24V, 1A
DC Input: 9-48V , 2A max.
AC Input: 24V
, 0.8A max.
1 2 3 4 5 6

10
2. Tighten the wire-clamp screws for preventing the wires from loosening.
123456
Power 1 Alarm Power 2
+ - + -
1. The wire gauge for the terminal block should be in the range
between 12 and 24 AWG.
2. The IGS-1000-8T4X supports DC input range of 9V to 48V.
The IGS-1000-8UP4X supports DC input range of 48V to
54V.
To avoid damage, please use the IGS-1000 Series under its
specification.
PWR1 and PWR2 must provide the same DC voltage while
operating with dual power input.