Planet IGS-20160HPT User manual

Industrial L3 16-Port 10/100/1000T 802.3at PoE+
2-Port 10/100/1000T + 2-Port 1G/2.5G SFP
Managed Ethernet Switch
IGS-20160HPT
Quick Installation Guide

Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Wiring the Power Inputs.............................................................................. 5
3.1 Grounding the Device .......................................................................... 6
4. Terminal Setup ........................................................................................... 7
4.1 Logging on to the Console.................................................................... 8
 4.2 ConguringIPAddress......................................................................... 8
5. Starting Web Management .........................................................................11
5.1 Logging in to the Industrial Managed PoE+ Switch ................................11
 5.2 SavingConguration...........................................................................14
6. RecoveringBacktoDefaultConguration.....................................................15
7. Customer Support .....................................................................................16

3
1. Package Contents
Thank you for purchasing PLANET Industrial L3 16-Port 10/100/1000T 802.3at
PoE+ 2-Port 10/100/1000T + 2-Port 1G/2.5G SFP Managed Ethernet Switch. The
description of this model is as follows:
Model 10/100/1000TRJ45Ports 802.3atPoE+Ports 1G/2.5GSFPPorts
IGS-20160HPT 18 16 2
“Industrial Managed PoE+ Switch” mentioned in this Quick Installation Guide
refers to the above models.
Open the box of the Industrial Managed PoE+ Switch and carefully unpack it. The
box should contain the following items:
Item IGS-20160HPT
Quick Installation Guide 
DIN-railKit 
WallMountingKit 
DB9toRJ45InterfaceRS232ConsoleCable 
RJ45DustCap 19
SFPDustCap 2
If any item is found missing or damaged, please contact your local reseller for
replacement.

4
2. Requirements
zWorkstations running Windows XP/2003/2008/2012/Vista/7/8/10, MAC OS X or
later,Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zSerial Port Connection (Terminal)
 The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
The above Workstations have been installed with terminal emulator, such as
HyperTerminalincludedinWindowsXP/2003,puttyorteraterm.
 Serial cable -- one end is attached to the RS232 serial port, while the other
endtotheRJ45consoleportoftheIndustrialManagedPoE+Switch.
zEthernet Port Connection
 WorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
 Networkcables--Usestandardnetwork(UTP)cableswithRJ45connectors.
The above PC is installed with Web browser.
Note
Itis recommended touse Internet Explorer8.0 orabovetoaccess
the Industrial Managed PoE+ Switch. If the Web interface of the
Industrial Managed PoE+ Switch is not accessible, please turn off
theanti-virussoftwareorfirewallandthentryitagain.

5
3. Wiring the Power Inputs
The Upper Panel of the Industrial Managed PoE+ Switch indicates a DC inlet power
socket and consists of one terminal block connector within 6 contacts. Please follow
the steps below to insert the power wire.
1.Insert positive/negative DC power wires into Contacts 1 and 2 for Power 1, or
Contacts 5 and 6 for Power 2.
 IGS-20160HPT:DC48-56V
DI 0DI 1DO 0DO 1GND GND
Fault
V1+ V2+
PWR2PWR1
Dual power input is required
for maximum PoE loading.
Refer to user’s manual for
more details.
Input: 48-56V , 7.5A max.
Max. fault loading: 24V, 1A
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-1: IGS-20160HPT Upper Panel
2.Tightenthewire-clampscrewsforpreventingthewiresfromloosening.
123456
V1+ V1- V2+ V2-
Power 1 Power 2
(DC1) (DC2)
Model Positive (+) Pin Negative(-)Pin
IGS0-20160HPT Pin1/5 Pin2/6

6
Note
1.The wire gauge for the terminal block should be in the range
from 12 to 24 AWG.
2.Please check the wire AWG Ampere specification before
connectingPLANETIndustrialManagedSwitch.
3.1 Grounding the Device
Users MUST complete grounding wired with the device; otherwise, a sudden
lightning could cause fatal damage to the device.
DI 0DI 1DO 0DO 1GND GND
Fault
V1+ V2+
PWR2PWR1
Dual power input is required
for maximum PoE loading.
Refer to user’s manual for
more details.
Input: 48-56V , 7.5A max.
Max. fault loading: 24V, 1A
1 2 3 4 5 6
1 2 3 4 5 6
Earth Ground
Note
EMD(Lightning)DAMAGEISNOTCONVEREDUNDERWARRANTY.

7
4. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to RJ45 type serial (console) port of the Industrial
Managed PoE+ Switch. The console port of the Industrial Managed PoE+ Switch is
DCE already, so that you can connect the console port directly through PC without
the need of null modem.
PC/Workstation with
Terminal Emulation Software
RJ45 to DB9 RS232 Cable
Serial Port
Console Port
115200,N,8,1
IGS Industrial Managed Switch
Console
115200,N,8,1
P1 P2
Ring R.O.
Fault
I/O
Figure 4-1: Industrial Managed PoE+ Switch Console Connectivity
A terminal program is required to make the software connected to the Industrial
Managed PoE+ Switch. Windows' Hyper Terminal program may be a good choice.
TheHyperTerminalcanbeaccessedfromtheStart menu.
1. Click START, then Programs,Accessories and then Hyper Terminal.
2. When the following screen appears, make sure that the COM port should be
conguredas:
zBaud:115200
zParity:None
zData Bits: 8
zStop Bits: 1
zFlowControl:None
Figure 4-2: COM Port Conguration

8
4.1 Logging on to the Console
Once the terminal has been connected to the device, power on the Industrial
Managed PoE+ Switch and the terminal will display “running testing procedures”.
Then, the following message asks to log in user name and password as shown
in Figure 4-3. Please enter the factory default user name “admin” and password
“admin”.
Username: admin
Password: admin
Figure 4-3: Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
description of the commands, please refer to the following chapters.
Note
1.For security reason, please change and memorize the new
password after this first setup.
2. Only accept command in lowercase letter under console inter-
face.
4.2 ConguringIPAddress
The Industrial Managed PoE+ Switch is shipped with default IP address shown
below:
IPAddress:192.168.0.100
Subnet Mask: 255.255.255.0

9
To check the current IP address or modify a new IP address for the Industrial
Managed PoE+ Switch, please use the procedure as follows:
DisplayofthecurrentIPAddress
1.Atthe“#” prompt, enter “show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressshowninFigure4-4.
Figure 4-4: IP Information Screen
CongurationoftheIPAddress
3.At the “#” prompt, enter the following command and press <Enter> as shown
inFigure4-5.
The previous command would apply the following settings for the Industrial
Managed PoE+ Switch.
IPAddress:192.168.1.100
Subnet Mask: 255.255.255.0
Figure 4-5: Conguring IP Address Screen
4. Repeat step 1 to check if the IP address has changed.

10
StoringCurrentSwitchConguration
5.Atthe“#” prompt, enter the following command and press <Enter>.
# copy running-cong startup-cong
Figure 4-6: Saving Current Conguration Command Screen
If the IP is successfully congured, the Industrial Managed PoE+ Switch will apply
the new IP address setting immediately. You can access the Web interface of the
Industrial Managed PoE+ Switch through the new IP address.
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.

11
5. Starting Web Management
The following shows how to start up the Web Management of the Industrial
Managed PoE+ Switch. Note the Industrial Managed PoE+ Switch is congured
through an Ethernet connection. Please make sure the manager PC must be set to
the same IP subnet address.
For example, the default IP address of the Industrial Managed PoE+ Switch is
192.168.0.100, then the manager PC should be set to 192.168.0.x (where x
is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
IP Address:
192.168.0.x
IP Address:
192.168.0.100
IGS Industrial Managed Switch
RJ45/UTP Cable
Figure 5-1: IP Management Diagram
5.1 Logging in to the Industrial Managed PoE+ Switch
1.Use Internet Explorer 8.0 or above for Web browser and enter IP address
https://192.168.0.100 (the factory-default IP address) to access the Web
interface.
2. When the following dialog box appears, please enter the default user name
“admin” and password “admin” (or the password you have changed before) as
showninFigure5-2.

12
DefaultIPAddress:192.168.0.100
Default Username: admin
Default Password: admin
Figure 5-2: Web Login Screen
3.Afterenteringthepassword,themainscreenappearsasshowninFigure5-3.
Figure 5-3: Web Main Screen of Industrial Managed PoE+ Switch
The Switch Menu on the top of the Web page lets you access all the commands
and statistics the Industrial Managed PoE+ Switch provides. The Switch Menu
always contains one or more buttons, such as “System”, “Switching”,
“Routing”, “QoS”, “Security”, “PoE”, “Ring”, “ONVIF” and “Maintenance”.
Figure 5-4: Switch Menu

13
Figure 5-5: Switch Sub-menu
Figure 5-6: Switch Sub-menu
Now, you can use the Web management interface to continue the Switch
management. Please refer to the user manual for more.
Note
If you are not familiar with Switch functions or the related param-
eter, press “Help icon” anytime on the Web page to get the help
description.

14
5.2 SavingConguration
To save all applied changes and set the current conguration as a startup
conguration on the Web user interface, the startup-conguration le will be
loaded automatically across a system reboot.
1. Click the Save icon on the top Switch Menu bar.
2. Press the “Save Conguration” button.
3. Or the other way to save the setting is to Click Maintenance, Switch Mainte-
nance, Save Startup Cong.
Figure 5-7: Save Cong -- Maintenance

15
6.RecoveringBacktoDefaultConguration
IP address has been changed or admin password has been
forgotten –
To reset the IP address to the default IP address “192.168.0.100” and the
user password to factory default mode (default password is admin), press the
hardware-based reset button on the front panel for about 10 seconds. After
the device is rebooted, you can log in the management Web interface within the
same subnet of 192.168.0.xx and default password. Be noted that all the previous
setups will be disappeared after the factory default reset is made.
1
3
5
7
2
4
6
8
9
11
13
15
10
12
14
16
Reset
Console
115200,N,8,1
19
20
17
18
P1 P2
Ring R.O.
Fault
I/O
IGS-20160HPT
ACTLNK
PoE-in-Use
802.3at PoE+
ACT1G/2.5G LNK
LNK ACT10/100
Reset Button
Figure 6-1: IGS-20160HPT Reset Button

16
7. Customer Support
Thank you for purchasing PLANET products. You can browse our online FAQ
resourceon PLANETweb siterst tocheck ifit couldsolve yourissue. Ifyouneed
moresupportinformation,pleasecontactPLANETswitchsupportteam.
PLANETonlineFAQs:
http://www.planet.com.tw/en/support/faq
Switch support team mail address:
[email protected]
IGS-20160HPTUser’sManual:
https://www.planet.com.tw/en/support/downloads?method=keyword&keyword=IGS
&view=3&page=1#list
(PleaseselectyourswitchmodelnamefromtheProductModeldrop-downmenu.)
Copyright © PLANET Technology Corp. 2020.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.