Planet 802.11n Wireless Access Point WNAP-1120 User manual

– 1 – – 2 –
– 3 – – 4 –
1. Package Contents
l1 x WNAP-1120/WNAP-1120PE
l1 x 5V1A Power Adapter
l1 x User’s Manual CD
l2 x 3dBi External Antenna
l1 x Ethernet Cable
l1 x Quick Installation Guide
Note
1. If any of the above items are missing or
damaged, contact your local dealer for
support.
2. In the following information, the terms of
“11n AP” will mean WNAP-1120/ WNAP-
1120PE unless it is specified.
1. Please Connect bundled antennas to the two SMA connec-
tors.
2. Please Connect the LAN PC or network devices to 11n AP
LAN port with RJ-45 Ethernet cable.
3. Please Connect power adapter to the power socket on
11n AP, and plug the other end of the power pack into
an electrical outlet.
2. Physical Installing
SMA Connectors
WPS/Reset
LAN Port
5V Power Socket
SMA Connectors
(EX: PoE for WNAP-1120PE only)
Note
1. ONLY use the power adapter supplied with
11n AP. Otherwise, the product may be
damaged.
2. For the power supply of WNAP-1120PE,
you could use either IEEE 802.3af PSE
device or 5VDC Adapter. Please do not use
5V adapter and PSE devices at the same
time. It may damage the 11n AP devices.
4. After the hardware connection done, please refer to
below for the conguration.

– 1 – – 2 –
– 3 – – 4 –
1. Package Contents
l1 x WNAP-1120/WNAP-1120PE
l1 x 5V1A Power Adapter
l1 x User’s Manual CD
l2 x 3dBi External Antenna
l1 x Ethernet Cable
l1 x Quick Installation Guide
Note
1. If any of the above items are missing or
damaged, contact your local dealer for
support.
2. In the following information, the terms of
“11n AP” will mean WNAP-1120/ WNAP-
1120PE unless it is specified.
1. Please Connect bundled antennas to the two SMA connec-
tors.
2. Please Connect the LAN PC or network devices to 11n AP
LAN port with RJ-45 Ethernet cable.
3. Please Connect power adapter to the power socket on
11n AP, and plug the other end of the power pack into
an electrical outlet.
2. Physical Installing
SMA Connectors
WPS/Reset
LAN Port
5V Power Socket
SMA Connectors
(EX: PoE for WNAP-1120PE only)
Note
1. ONLY use the power adapter supplied with
11n AP. Otherwise, the product may be
damaged.
2. For the power supply of WNAP-1120PE,
you could use either IEEE 802.3af PSE
device or 5VDC Adapter. Please do not use
5V adapter and PSE devices at the same
time. It may damage the 11n AP devices.
4. After the hardware connection done, please refer to
below for the conguration.

– 7 – – 8 –
3. Web Conguration
The following instructions will guide you to complete to login
the 11n AP WEB UI settings.
Note
Pease use the following IP address in your PC
when you set 11n AP at first time.
IP address: 192.168.1.x.
Subnet Mask: 255.255.255.0
1. Open your web browser and type the 11n AP default IP
address (http://192.168.1.1) into the “Address Field”
of you web browser. Before conguration, please make
sure your PC’s IP address is under the same IP range of
11n AP.
3. After pressing “OK”, you can see the 11n AP web
management UI as the above information screen. You
could set the rst wireless connection according to these
congurations of the 11n AP web UI.
2. After enter the IP address and press Enter key, you can
see the dialog box appear as below, please enter the
User name and Password with “admin”. Then press
“OK”.
4. Further Conguration
If you want to set 11n AP to other operating mode or
congure more detail settings, please refer to the User
manual in the bundled CD-ROM. If you have any difculty
on resolving the problem while installing or using 11n AP,
please feel free to contact with your local dealer or PLANET
for support.
2011-E10300-000
– 5 – – 6 –

– 7 – – 8 –
3. Web Conguration
The following instructions will guide you to complete to login
the 11n AP WEB UI settings.
Note
Pease use the following IP address in your PC
when you set 11n AP at first time.
IP address: 192.168.1.x.
Subnet Mask: 255.255.255.0
1. Open your web browser and type the 11n AP default IP
address (http://192.168.1.1) into the “Address Field”
of you web browser. Before conguration, please make
sure your PC’s IP address is under the same IP range of
11n AP.
3. After pressing “OK”, you can see the 11n AP web
management UI as the above information screen. You
could set the rst wireless connection according to these
congurations of the 11n AP web UI.
2. After enter the IP address and press Enter key, you can
see the dialog box appear as below, please enter the
User name and Password with “admin”. Then press
“OK”.
4. Further Conguration
If you want to set 11n AP to other operating mode or
congure more detail settings, please refer to the User
manual in the bundled CD-ROM. If you have any difculty
on resolving the problem while installing or using 11n AP,
please feel free to contact with your local dealer or PLANET
for support.
2011-E10300-000
– 5 – – 6 –