Planet WNAP-7205 User manual

IEEE802.11a/n 5GHz
Wireless Outdoor AP
WNAP-7205
Icon5Icon4Icon3Icon2Icon1

2 / 26
Product Position
Product Overview
Product Features
Applications
Management –Web UI
Comparison –Internal
Comparison –External
Appendix
Presentation Outline

3 / 26
Product Position
PLANET Outdoor Wireless LAN Product Classification
WAP-6200
WNAP-7205
MAP-3020
WNAP-7300
802.11a/n
(5GHz)
802.11a/b/g
(2.4GHz/5GHz)
802.11a
(5GHz)
802.11b/g
(2.4GHz)
802.11b/g/n
(2.4GHz)
1T1R / 150Mbps
2T2R / 300Mbps
WAP-7500
WNAP-6300
WNAP-7200
802.11n
Technology
WNAP-6305

4 / 26
Quick Review –5GHz 802.11n Outdoor
WNAP-7200 WNAP-7205 WNAP-7300
Frequency 5.180GHz ~ 5.825GHz 5.470~5.850GHz
Standard 802.11a/n
MIMO System 1T1R 2T2R
Max. Data Rate 150Mbps 300Mbps
Built-in Antenna Built-in 18dBi Built-in16dBi Built-in16dBi
Dual-polarity
External Antenna
Connector No RP-SMA x1 RP-SMA x2
Max. TX Power 23dBm (200mW) 25dBm (300mW) 26dBm (400mW)
Operating Temp. 0~55°C-20~70°C -20~70°C
LAN 1 x RJ-45 2 x RJ-45 (LAN/WAN) 2 x RJ-45 (LAN x2)
Wireless Mode
AP, Client
AP+WDS
Bridge (4)
WISP
AP, Client
AP+WDS
Bridge (4)
WISP
Universal Repeater
AP, Client
AP+WDS
Bridge (4)
WISP

5 / 26
Product Overview
H/W Design
IP-55 case
IPIP--5555
ProtectionProtection
77 mm
225 mm
60
mm

6 / 26
Product Overview
H/W Design
Internal Ant.: Built-in 5GHz 16dBi
patch antenna
Horizontal : 60 degree
Vertical : 30 degree
External Ant.: Optional RP-SMA x1
*Switchable by web UI
Horz. 60 deg.Horz. 60 deg.
Vert. 30 deg.Vert. 30 deg.

7 / 26
Product Overview
Rear Panel
LED
Port & Connector
LAN PortLAN Port
RP-SMA
Connector
RP-SMA
Connector
WAN PortWAN Port
PWR LEDPWR LED
WLAN LEDWLAN LED WAN LEDWAN LED
LAN LEDLAN LED

8 / 26
Product Overview
Proprietary PoE interface
Offer Power Supply (DC) with PoE (Power over Ethernet) injector
Up to 100 meters UTP wiring
Reset button on PoE
To WNAP-7205
(UTP wired up to 100m)
To LAN Switch or PC
Power Adapter
(12V, 1A)
Power
LED
Reset Button
To Factory Default

9 / 26
Product Overview
Installation
STEP 1：Push the latch in the bottom of WNAP-7205 to remove the
sliding cover.

10 / 26
Product Overview
Installation
STEP 2：Plug the RJ-45 Ethernet cable into the LAN Port, then slide
the cover back to seal the bottom of the WNAP-7205.