Plantronics Marque M155 User manual

LEARN MORE
MARQUE™M155™
DESIGNED IN SANTA CRUZ, CALIFORNIA

TAKE A GOOD LOOK
CALL BUTTON
• Take a call (1 tap or say “Answer”)
• Reject a call (1-second press or
say “Ignore”)
• Redial (2 taps)
• Initiate phone’s voice-dialing
(2-second press)
• Reconnect lost Bluetooth®
connection (1 tap if the headset
can’t automatically reconnect)
• Activate pairing mode after initial
set up (press until red/white LED
flashes)
POWER SWITCH
• On (slide to reveal green)
• Off (slide to conceal green)
MICRO USB CHARGING PORT
• Charge
1 hour before first use
2 hours (for full charge)
VOLUME/MUTE BUTTON
• Volume presets
(1 tap per level change)
• Mute on or off
(1-second press during call)
INDICATOR LIGHT (LED)
• Low battery
(3 red flashes at powering on)
• Pairing mode
(repeating red/white flashes)
• Charging (solid red until charged)

AMP UP YOUR ANDROID OR iPHONE
Simplify the Set Up:
If you have an Android smartphone, download the MyHeadset™app then turn on your new
headset. The app will finish the pairing process with just one on-screen tap.
Download the Companion App:
Our free MyHeadset app gives you tips, tricks and tools for your Android or iPhone. A quick
download from the Android marketplace or the Apple app store gets you going.
 •One-tappairingtoyourAndroid
 •Recordamemothenemailit
 •LearnaboutA2DPaudiostreaming
 •CheckoutproductFAQsanduserguide
MyHeadset™

PLT_M155
CONNECT TO YOUR PHONE
“Pairing” is the set-up process of
introducing your headset to your
phone. Before using your headset
for the first time, you must pair it
with your Bluetooth-enabled phone.
“Multipoint” lets you pair this
headset with two phones so you can
answer a call from either phone.
1. READY
First Time, Right Out of the Box:
Put on the headset and slide
power switch to turn it on. The
LED flashes red/white to indicate
pairing mode.
Pair New or Second Phone:
Turn on headset. Press Call
button until the LED flashes red/
white for pairing mode.
2. SET
Activate the Bluetooth feature
on your phone, then use phone
menus to “add,” “search” or “scan”
new Bluetooth devices.
Phones Have Different Menus to
Select from, for example:
iPhone: Settings > General >
Bluetooth > On (starts the search
for devices)
BlackBerry®smartphone:
Settings/options > Bluetooth: On >
Search for devices
Android™:
Settings > Wireless & Networks >
Bluetooth: On > Scan for devices
3. CONNECT
Select “PLT_M155” from the list of
Bluetooth devices shown on your
phone.
If phone asks for a passcode, enter
four zeros (0000). You may see ****
on screen.
Some phones also ask to confirm
headset connection after pairing.
Headset LED will stop flashing red/
blue once successfully paired/
connected.
You can now make a call using your
phone’s keypad or voice-dialing
feature.

FIND YOUR FIT
The loop of the gel eartip tucks into the back
curve of your ear for a stable fit.
Try on the headset. The eartip is positioned to
suit most people, but you may want to rotate it
to best fit your left or right ear.
To remove the eartip, pull the loop of the eartip
away from the speaker stem. (Don’t pull on the
speaker base and stem.)
If the gel eartip feels loose or tight in your ear,
then replace it with one of the two alternate
size eartips.
Tuck the bottom of the new eartip over the
speaker and pull the eartip over the speaker.
(Don’t push the speaker through the gel eartip.)

TIPS
Stay Near Your Phone
Bluetooth has a working “range” of up to 33
feet between the phone and headset before
audio degrades and the connection is lost.
Know How to Reconnect
Your headset tries to reconnect a lost connec-
tion. If it can’t, then tap the Call button once or
manually reconnect via the phone’s Bluetooth
device menu.
Use Multipoint One Call at a Time
Once you have activated multipoint and paired
your two phones, it’s easy to answer calls from
either phone.
When already on a call, you will hear a ringtone
notification of the incoming call from the
second paired phone.
To answer a second call from the other phone,
you must end the current call (tap Call button)
so new call automatically answers.
If you choose not to answer the second call, it
will go to voicemail.
Play Tunes and Take Calls
If you are listening to any streaming audio
when your phone rings, the audio will pause
to allow you to answer or ignore the incoming
call. Once the call ends or is ignored, the
streaming audio resumes playback.
Use Your Voice
After being prompted by the headset, you can
just say “answer” or “ignore” to incoming calls -
no need to press any buttons.
You can disable this voice-controlled feature.
With the headset powered on, simultaneously
press the call button and vol button until you
see the white LED flash twice. To reactivate the
feature, just repeat the steps and you will again
see the white LED flash twice.

SPECIFICATIONS
Talk Time Up to 5 hours
Standby Time Up to 9 days
Operating Distance (Range) Up to 33 feet (10 meters), Class II
Headset Weight 7 grams
Charge Connector Micro USB charging
Battery Type Rechargeable non-replaceable lithium ion polymer
Charge Time (Maximum) 2 hours for full
Power Requirements 5V DC – 180mA
Bluetooth Version Bluetooth v3.0
Bluetooth Profiles Hands-Free (HFP) Profile 1.6 and Headset (HSP) Profile 1.2
Advanced Audio Distribution Profile (A2DP)
Operating Temperature 32°F - 104°F (0 - 40°C)
Storage Temperature 32°F - 104°F (0 - 40°C)
Charging Temperature 32°F - 104°F (0 - 40°C)

NEED MORE HELP?
Don’t return to the store - call our friendly customer support
team at 1-866-363-2583 (USA) or visit plantronics.com/support
for local numbers outside the US.
© 2011 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of
Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks
are the property of their respective owners.
Patents US 5,712,453; D628188; Patents Pending. 86818-06 (9-11) ROW-EN