Plantronics Savi Office WO350 User manual

Getting started:
The Plantronics Savi Office headset is ready to use with
your computer and Cisco® Unified Communications
Integration for Cisco WebEx Connect™.
1. Connect your Savi Office base to the
computer. If this is the first time you are
connecting, wait for the installation process to
complete.
2. To get call control features, please download
the latest version of Plantronics software at
plantronics.com/software.
Note: Check with your IT staff before installing
software on your computer.
Configuring Cisco Unified Communications Integration
for Cisco WebEx Connect to always route call audio to
the headset:
3. Click Edit in the upper left corner of the Cisco
WebEx Connect main screen.
4. Then select Settings.
5. Next choose Audio/Video.
6. Select your Plantronics headset in the drop
down for both Speakers and Microphone.
7. You can also adjust the Speakers and
Microphone volume in this screen.
8. When you are finished, select Save.
Note: USB configuration settings are unique for each USB
port. If you connect the headset to a different port you will
need to make these changes again to set behavior for that
USB port.
Savi®Office WO300™/WO350™Quick Setup Guide
Welcome:
Using a Plantronics Savi Office headset
for PC calls will deliver a simpler, more
comfortable and better sounding
audio experience than you could get
using just your computer’s internal
microphone and speaker.
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Savi, WO300 and WO350 are trademarks or registered trademarks of Plantronics, Inc. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in the U.S. and other
countries. Published 01.11
3
4
5
6
6
8
Savi Office WO300/WO350 Key Features:
One-button call control manages PC or
desk phone calls
Wideband support for best-in-class PC
audio
Noise-canceling microphone filters out
background noise
Conference up to four Savi Office
headsets
Monaural (WO300), Binaural (WO350)
*This picture shows the
Binaural (WO350) version

Making and Receiving Calls with Cisco Unified Communications Integration for Cisco WebEx Connect
To MAKE a call:
To call an existing contact, select the
Contact Tab (1) and select the contact
you would like to call. Right click on their
picture (2), select Start Call (3) and
choose a number (4).
You can also enter a phone number
manually using the search box located
near the top of the Cisco WebEx Connect
main screen (5).
When a call is placed, a call notification
will appear in the Cisco WebEx Connect
main screen, and the audio will be
routed to your headset.
To RECEIVE a call:
When you receive a call, a notification
window will appear in the lower right
corner of your computer screen (6).
To answer the call, use the controls on
your headset or click the green Answer
button (7) in the call notification
window.
1
4
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Savi, WO300 and WO350 are trademarks or registered trademarks of Plantronics, Inc. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in the U.S. and other
countries. Published 01.11
2
3
4
6
7
5
1