pleasant hearth FA338LT User manual

HARPER LOG HOLDER WITH TOOLS
MODEL #FA338LT
40-10-161 1
Espanol p.7
Francais p.13
Serial Number Purchase Date
ATTACH YOUR RECEIPT HERE
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m. CST, Monday – Friday, or
email us at [email protected].
Rev 03/30/2020

2
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A Tall Log Bracket 1
B Short Log Bracket 1
C Base 1
D Shovel 1
E Tongs 1
F Poker 1
G Brush 1
A
C
E
D
B
F
G

3
HARDWARE CONTENTS
PREPARATION
SAFETY INFORMATION
WARNING
M8 X 16mm
Bolt
Qty. 4
M8 Wrench
Qty. 1
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-877-447-4768, 8:00 a.m. – 4:30 p.m. CST, Monday – Friday.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assem-
ble the product.
Estimated Assembly Time: 10 minutes
Tools Required for Assembly (included): Wrench.
• Do not allow children to play with or around the tool set.
• Do not attempt to clean the tools while they are hot.
• Hot particles may stick to surface of tools.
• TOOL HANDLES AND TOOLS MAY BECOME HOT DURING AND AFTER USE, USE
HEAT-RESISTANT GLOVES TO HANDLE HOT TOOLS.
AA BB

4
ASSEMBLY INSTRUCTIONS
Hardware Used
1. Attach tall log bracket (A) to base (C) by
inserting 2 bolts (AA) through the corresponding
predrilled holes in the tall log bracket (A) and
base (C).
Tighten securely with wrench (BB).
2. Attach short log bracket (B) to base (C) by
inserting 2 bolts (AA) through the corresponding
predrilled holes in the short log bracket (B) and
base (C).
Tighten securely with wrench (BB).
M8 X 16mm Bolt
M8 Wrench
x 2
AA
BB
3. Hang the shovel (D), tongs (E), poker (F), and
brush (G) on the stand as illustrated.
Hardware Used
M8 X 16mm Bolt
M8 Wrench
x 2
AA
BB
1
AA
A
C
2
C
AA
B
E
3
G
F
D

CARE AND MAINTENANCE
• Wipe the tools and stand with a soft cloth.
• Do not use abrasive cleaners as they may cause parts to tarnish or rust.
• Store in a clean, dry place.
1-YEAR LIMITED FRAME WARRANTY
If within one year from the date of original purchase, this item fails due to a defect in material or
workmanship, we will replace or repair at our option, free of charge. To order parts or to obtain war-
ranty service, call 1-877-447-4786, Monday - Friday, 8:00 a.m. - 4:30 p.m. CST. This warranty does
not cover defects resulting from improper or abnormal use, misuse, accident, or alteration.
Failure to follow all instructions in the owner’s manual will also void this warrranty. The
manufacturer will not be liable for incidental or consequential damages, or common erosion of out-
door products. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you. This warranty gives you spe-
cic legal rights, and you may also have other rights which vary from state to state.
5

C
E
D
B
F
A
G
H
I
J
6
PART DESCRIPTION PART #
A Tall Log Bracket 40-06-659
B Short Log Bracket 40-06-660
C Base 40-01-627
D Shovel 40-03-379
E Tongs 40-02-274
F Poker 40-04-482
G Brush 40-06-661
H Handle 40-07-777
I Brush Cap 40-06-662
J Brush Head 40-06-632
AA-BB Hareware Pack 40-09-126
NA Instruction Manual 40-10-161
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-877-447-4768, 8:00 a.m. - 4:30
p.m., CST, Monday - Friday.
Printed in China
BB
Model/Modelo/Modèle
#FA338LT
Questions, problems, missing parts?
Before returning to your retailer,
call our customer service department
at 1-877-447-4768, 8:30 a.m. -
4:30 p.m., CST, Monday - Friday.
¿Preguntas, problemas, piezas
faltantes? Antes de volver a la tienda,
llame a nuestro Departamento de
Servicio al Cliente al 1-877-447-4768,
de lunes a viernes de 8:30 a.m. a
4:30 p.m., hora central estándar.
Des questions, des problèmes,
des pièces manquantes? Avant de
retourner l’article au détaillant,
appelez notre service à la clientèle
au 1 877 447-4768, entre 8 h 30 et
16 h 30 (HNC), du lundi au vendredi.
40-09-126
AA
BB
GHP Group Inc.
6440 W. Howard St.
Niles, IL 60714-3302
877-447-4768

CESTAS PARA LA LEÑA
CON HERRAMIENTAS HARPER
MODELO #FA338LT
40-10-161 7
ADJUNTE SU RECIBO AQUÍ
Número de serie Fecha de compra
¿Preguntas, problemas, piezas faltantes?
Antes de volver a la tienda, llame a nuestro departamento de servicio al cliente al 1-877-447-4768,
de lunes a viernes de 8:00 a.m. a 4:30 p.m., hora central estándar o envíenos un correo electrónico
a [email protected]
English p.1
Francais p.13
Rev 03/30/2020

8
CONTENIDO DEL PAQUETE
PIEZA DESCRIPCIÓN CANTIDAD
ASoporte Log Alto 1
B Soporte Log Cortos 1
C Base 1
D Pala 1
E Tenazas 1
F Atizador 1
G Cepillo 1
A
C
E
D
B
F
G

9
AA BB
ADITAMENTOS
PREPARACIÓN
INFORMACIÓN DE SEGURIDAD
ADVERTENCIA
M8 X 16mm
Perno
Cant. 4
M8 Llave
de tuercas
Cant. 1
Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto.
Si tiene alguna pregunta con respecto al producto, llame a nuestro Departamento de Servicio al Cliente
al 1-877-447-4768, de lunes a viernes de 8:00 a.m. a 4:30 p.m., hora central estándar.
Antes de comenzar a ensamblar el producto, asegúrese de tener todas las piezas. Compare las
piezas con la lista del contenido del paquete y la lista de aditamentos. No intente ensamblar el pro-
ducto si falta alguna pieza o si estas están dañadas.
Tiempo estimado de ensamblaje: 10 minutos
Herramientas necesarias para el ensamblado (incluidas): Llave de tuercas.
• No permita que los niños jueguen con las herramientas o cerca de ellas.
• No trate de limpiar las herramientas mientras están calientes.
• Las partículas calientes pueden adherirse a la supercie de las herramientas.
• LAS MANIJAS DE LAS HERRAMIENTAS Y LAS HERRAMIENTAS SE PUEDEN CALENTAR
DURANTE Y DESPUÉS DEL USO, USE GUANTES RESISTENTES AL CALOR PARA MANIPU
LAR LAS HERRAMIENTAS CALIENTES.

10
INSTRUCCIONES DE ENSAMBLAJE
M8 Llave
de tuercas
Aditamentos utilizados
1. Fije la base (C) al soporte log alto (A)
mediante la inserción de 2 pernos (AA) a través
de los correspondientes oricios previamente
taladrados en la base (C) y soporte log alto (A).
Apriete rmemente con la llave de tuercas (BB).
2. Fije la base (C) al soporte log cortos (B)
mediante la inserción de 2 pernos (AA) a través
de los correspondientes oricios previamente
taladrados en la base (C) y soporte log cortos (B).
Apriete rmemente con la llave de tuercas (BB).
M8 X 16mm Perno x 2
AA
BB
3. Cuelgue la pala (D), el tenazas (E), el atizador
(F) y el cepillo (G) en el soporte, como se ilustra.
Aditamentos utilizados
x 2
AA
BB
1
AA
A
C
2
C
AA
B
E
3
G
F
D
M8 Llave
de tuercas
M8 X 16mm Perno