Plejd DAL-01 User manual

DAL-01
INSTALLATION MANUAL
0290.1.7
Mains electricity
230 VAC/50 Hz max 0.05 A
Standby power
0.3 W
External operating temperature
-20 to +35 °C
Dimensions
46x46x18 mm
Protection
Over temperature soware
Short circuit protecon
DALI bus
Max 64 DALI loads
Guaranteed supply current 128 mA
Maximum supply current 150 mA
Short circuit protecon acvates aer 2 seconds,
recovers aer 13 seconds.
Basic insulaon
Radio
2,4 GHz mesh
Bluetooth®
Radio range*
Up to 10m indoors.
*The Plejd mesh technology extends the range by
allowing the units to communicate with each other.
Compliant to standards
Plejd AB hereby declares that the product
complies with the norms and guidelines
pursuant to Direcve 2014/53/EU.
EN 61347
EN 55015
EN 301489
EN 300328
IEC 62386-101
IEC 62386-103
RISK OF INJURY TO PERSON OR PROPERTY
All work on the appliance must be
carried out by an authorised electrician.
Naonal laws and regulaons
must be followed.
Plejd AB
Kroksläs fabriker 27A
431 37 Mölndal
Sweden
Manufacturer | Plejd AB
Country of manufacture | Sweden
Further informaon can be found
in the Plejd app or at plejd.com

Install the product in an appliance box or on a bracket
(not provided, MNT-01) on a DIN rail or wall.
Connect the product according to the circuit diagram.
The module comes with a built-in power supply, so there
is no need to use a dedicated DALI power supply for the
DALI bus.
Connect the product
1
Control inputs 1 and 2 can be used for control using e.g.
- Push-buon (preset)
- Light switch
- Moon sensor
The inputs can also be used to wirelessly control one
or more products from Plejd. A double click can be used
to acvate lighng scenarios.
The sengs are easy to adjust in the app.
Control via control inputs 1 2
Support
Download the Plejd app via the App Store or Google Play.
Aer supplying power to the unit based on one of the
wiring diagrams, you can use the app to install the lighng.
This requires Internet connecvity and Bluetooth® on your
phone/tablet. You do not need any addional equipment
to get started.
With the help of the app, it’s simple to congure all
relevant sengs. The app can be used to schedule
the lighng using the astronomical clock or mer, control
lighng, and wirelessly sync control switches and scenarios.
Download the app and follow the instructions
Hand over the Plejd system
Hand over the Plejd system to your customer by wring
the system code on the included scker . You’ll nd the
code in the app once you have completed the installaon.
Place the scker in the distribuon box and give the
welcome folder to the customer.
2
3
In the event of any technical quesons, please contact
Plejd customer services.
E-mail: [email protected] | Phone: [phone]
HI!
DA+DA-
N1 2
LL
L
N
DAL-01