Plejd DIM-01 User manual

DIM-01
INSTALLATION MANUAL
0082.2.4
Further informaon can be found
in the Plejd app or at plejd.com
Compliant to standards
Plejd AB hereby declares that the product
complies with the norms and guidelines
pursuant to Direcve 2014/53/EU.
EN 60669-1
EN 60669-2-1
EN 301489-1
EN 301489-17
EN 300328
Mains electricity
230 V/50 Hz
Standby power
0,3 W
External operating temperature
-20 to +35 °C
Dimensions
46x46x18 mm
Load type
Trailing edge
Leading edge
Protection
Over temperature soware
Over temperature hardware
Overload soware
Radio
2,4 GHz mesh
Bluetooth®
Radio range*
Up to 10m indoors.
*The Plejd mesh technology extends the range by
allowing the units to communicate with each other.
Plejd AB
Kroksläs fabriker 27A
431 37 Mölndal
Sweden
Manufacturer | Plejd AB
Country of manufacture | Sweden
RISK OF INJURY TO PERSON OR PROPERTY
All work on the appliance must be
carried out by an authorised electrician.
Naonal laws and regulaons
must be followed.

NOTE! During installaon the product is
non-dimmable.
Use the app to congure before use.
Do not use with uorescent tubes,
convenonal transformers or low-energy bulbs.
*
Load*
230 V halogen/incandescent 0-300 W
230 V LED-light source/actuator (trailing edge) 0-200 VA
230 V LED-light source/actuator (leading edge) 0-100 VA
Electronic transformers (12 V halogen) 0-300 VA
Connect the product
1
Control inputs 1 and 2 can be used for control using e.g.
- Push-buon (preset)
-Light switch
- Moon sensor
The inputs can also be used to wirelessly control one
or more products from Plejd. A double click can be used
to acvate lighng scenarios.
The sengs are easy to adjust in the app.
Control via control inputs 1 2
Install the product in the appliance box behind the push-
buon/box lid or use a bracket (MNT-01, not included) on
the wall or DIN rail.
When installing in insulated or warm environments or
with several switches in the same box the total power is
reduced.
DIM-01 is a universal dimmer that can handle loads of
up to 300 VA and has adjustable minimum maximum and
start level.
Support
Download the Plejd app via the App Store or Google Play.
Aer supplying power to the unit based on one of the
wiring diagrams, you can use the app to install the lighng.
This requires Internet connecvity and Bluetooth®on your
phone/tablet. You do not need any addional equipment
to get started.
With the help of the app, it’s simple to congure all
relevant sengs. The app can be used to schedule
the lighng using the astronomical clock or mer, control
lighng, and wirelessly sync control switches and scenarios.
Download the app and follow the instructions
Hand over the Plejd system
Hand over the Plejd system to your customer by wring
the system code on the included scker . You’ll nd the
code in the app once you have completed the installaon.
Place the scker in the distribuon box and give the
welcome folder to the customer.
2
3
In the event of any technical quesons, please contact
Plejd customer services.
E-mail: [email protected] | Phone: [phone]
HI!
N L 1 2
L
N
DIM-01