Pollard 144 User manual

E
S
T
.
1
9
2
1
144 Maple Top Open Leg Bench
Assembly Instructions
www.pollardbros.com
1Stand legs upright and face as shown. Note: 6’
benches and under come with two legs, and 8’
benches and over come with three legs.
3/8” x 3/4”Hex Head Machine Screw 3/8” Lock Washer
3/8” Hex Nut
(2) or (3) Bench Legs (1) Formed Channel Stringer (1) Maple Bench Top
Includes:
x
x
xx
8
8
614
Steps:
Note: Additional hardware is provided for 8’ & 10’ benches.
Tools Needed:
wrench at head screwdriver
3/8” x 2 1/2” Flat Head Machine Screw

Pollard Brothers Manufacturing 5504 N. Northwest Highway Chicago IL 60630
. . . .
phone[phone] fax[phone] toll free(800) 551-5566
After top is in place, make sure bench is square and then, tighten all bolts,
starting with the stringer.
[2]
Attach stringer to the back leg uprights using (4)
3/8” x 3/4” Hex Head Machine Screws, 3/8“ hex
nuts, and 3/8”washers. HAND TIGHTEN ONLY.
2
4Place top on bench legs matching holes and use
(6) 3/8” x 2½” Flat Head Machine Screws and 3/8”
Hex Nuts No Washers needed.
3Attach shelf to Bench Leg crosses with the form
up in the back using 3/8” x 3/4” Hex Head
Machine Screws, 3/8“ hex nuts, and 3/8” wash-
ers. HAND TIGHTEN ONLY.