Pollard 332 User manual

E
S
T
.
1
9
2
1
332 - Steel Locker Room Bench
Assembly Instructions
www.pollardbros.com
1Lay Bench Seat on a at surface seat side facing
down. Fit (4) ⁄” x ¾” Flat head Machine Screws
through holes in bench seat with threads facing
up.
Fit Machine Screws in Bench through the holes
in the Bench legs and secure using(4) ⁄” lock
washers and (4) ⁄” Hex Nuts . HAND TIGHTEN
ONLY.
2
5/16” Hex Nut
5/16” Lock Washer
5/16” x 3/4” Flat Head
Machine Screw
(2) Bench Legs (1) Lower Grid Shelf (1) Steel Bench Seat (4) Glides (4) Brackets
Includes:
xx
x
x
4
x
16
4
x
16
16
4
Steps:
Tools Needed:
wrench at head screwdriver
1/4” x 3/4” Hex Head
Machine Screw
1/4” Hex Nut
1/4” Lock Washer

Set Lower Grate Shelf on underside of Bench Leg
Crosses and Secure to Bench Leg Urights using
(4) ¼” x ¾” Hex Head Machine Screws (4) ¼” lock
washers and (4) ¼” Hex Nuts . HAND TIGHTEN
ONLY.
3
Turn bench upright. Adjust glides until bench
is level on oor
5
Install Glides into Bracket and then attach to
Bench Leg using (3) ¼”x ¾” Hex Head Machine
Screws (3) ¼”lock washers and (3) ¼”Hex Nuts .
TIGHTEN AND LEVEL
4
After bench is upright, make sure bench is square and then, tighten all bolts,
starting with the lower grid shelf.
Pollard Brothers Manufacturing 5504 N. Northwest Highway Chicago IL 60630
. . . .
phone[phone] fax[phone] toll free(800) 551-5566