Polycom SpectraLink 6020 User manual

Wireless Telephone Quick Reference Guide
Mitel SX50/200/2000
Superset 420
1725-36154-001_D Superset is a trademark of Mitel Networks Corporation
[email protected] • 800.775.5330
Function Key
Strokes Default Settings Fill In Your Feature Settings
FCN + 1 MUTE
FCN + 2 XFER/CONF
FCN + 3 REDIAL
FCN + 4 MSG
FCN + 7
FCN + 8
FCN + 9
FCN + * Left Softkey
FCN + 0 Center Softkey
FCN + # Right Softkey
FCN + * Superkey
LINE + 0 CANCEL
On/Off Press and hold END. Two
chirps on, one chirp off
Make a call Press START to get dial tone.
Hang up Press END. Be sure to do this
at the end of each call.
Answer call Press START. Line indicator
comes on steady when the call
is answered.
Answer
second call Press HOLD to put your current call on hold, or END to hang up.
Press LINE + the digit that is
flashing.
Hold Press HOLD
Take off Hold Press LINE followed by the digit
for the line on hold, which will be
flashing.
Mute On/Off Press the MUTE softkey.
Function Pressing FCN while off hook
allows you to scroll through
menu screens.
User Options Press the CFG softkey while on
hook to change handset
settings.
SpectraLink 6020 Wireless Telephone
The diagram above shows how the Superset 420 keypad
corresponds to the Wireless Telephone.
The Wireless Telephone user will press LINE then 1-9 to
access Line Select Keys 1-9. Press LINE then *to access
the Superkey functions.
FCN followed by *on the Wireless Telephone is equivalent
to using the left softkey, FCN 0 equals the middle softkey,
and FCN # e
q
uals the ri
g
ht softke
y
.
For information on Battery Pack charging
and setting user preferences, see the
Wireless Telephone User Guide.
Superset 420