POSBank BLUO D25 User manual

Point-of-sale system
BLUO D25
Use’r manual
BLUO_D25_UM_eng_PBUM_E(Rev002;140926)

2
-Table of Contents-
POSBANKUSER MANUAL REVISION HISTORY.................................................................................................................................. 3
SPECIFICATION ...............................................................................................................................................................................4
(1) SPECIFICATION - OUTSIDE SIZE ............................................................................................................................................. 5
PREFACE ......................................................................................................................................................................................... 6
SYMBOL; MARK .............................................................................................................................................................................. 7
COPYRIGHT..................................................................................................................................................................................... 8
WARRANTY..................................................................................................................................................................................... 9
SAFETY INSTRUCTIONS................................................................................................................................................................ 10
NOTICE...........................................................................................................................................................................................11
LIABILITY LIMITATION .................................................................................................................................................................. 12
INSTALLATION RECOMMENDATIONS...........................................................................................................................................13
1.PRODUCTOVER VIEW.....................................................................................................................................................14
(1) INSIDEYOUR PACKAGE .............................................................................................................................................................................. 14
(2) PRE-INSTALLATION PREPARATION............................................................................................................................................................ 16
(3) PRODUCT OUTLINE.................................................................................................................................................................................... 16
(4) CONFIGURATION ........................................................................................................................................................................................17
(5) I/O PORT: DETAILS...................................................................................................................................................................................... 19
(6) SETTING UP: KEYBOARD & MOUSE CONNECTION .................................................................................................................................... 21
(7) SETTING UP: CONNECTION USB PORT....................................................................................................................................................... 22
(8) SETTING UP: CONNECTION VIA ETHERNET PORT (LAN) .............................................................................................................................23
(9) SETTING UP: LINE-OUT, MIC-IN, LINE-IN CONNECTION............................................................................................................................. 24
(10) SETTING UP: PRINTER CONNECTION ....................................................................................................................................................... 25
(11) SETTING UP: POWER CABLE CONNECTION.............................................................................................................................................. 26
(12) SWITCHING ON POS ..................................................................................................................................................................................27
(13) SHUTTING DOWN POS ............................................................................................................................................................................. 28
(14) SYSTEM DRIVERS ..................................................................................................................................................................................... 29
2.BLUOD25 MODULE REPLACEMENT .................................................................................................................................. 30
(1) SEPARATING LCD MONITOR MODULE ....................................................................................................................................................... 30
(2) SEPARATING HDD MODULE....................................................................................................................................................................... 32
(3) SEPARATING MOTHER BOARD & SUB PCB MODULE.................................................................................................................................. 36
(4) SEPARATING ADAPTER MODULE............................................................................................................................................................... 40
(5) SEPARATING STAND BACK ......................................................................................................................................................................... 42
3. INSTALLATION OF OPTION DEVICE.................................................................................................................................44
(1) INSTALLATION CDP MODULE-OPTION ...................................................................................................................................................... 44
(2) INSTALLATION 2ND DISPLAY MODULE-OPTION ....................................................................................................................................... 47
(3-1) INSTALLATION MSR MODULE-OPTION................................................................................................................................................... 50
(3-2) INSTALLATION MSR+SCR+I-BUTTON MODULE-OPTION ........................................................................................................................ 55
(4) INSTALLATION SPEAKERS MODULE-OPTION............................................................................................................................................ 60
(5) INSTALLATION LPT MODULE-OPTION....................................................................................................................................................... 64
(6) INSTALLATION USB PCB MODULE-OPTION............................................................................................................................................... 69
(7) INSTALLATION RAM MODULE-OPTION ......................................................................................................................................................74
(8) INSTALLATION 2ND STORAGE (HDD) MODULE-OPTION........................................................................................................................... 80
(9) INSTALLATION SMART BATTERY MODULE-OPTION ................................................................................................................................. 86
(10) INSTALLATION CASH DRAWER MODULE-OPTION................................................................................................................................... 91
4.MOTHERBOARD.............................................................................................................................................................98
(1) MOTHERBOARD OVERVIEW....................................................................................................................................................................... 98
(2) MOTHERBOARD LAYOUT........................................................................................................................................................................... 99
(3) JUMPERS ...................................................................................................................................................................................................101
5. BIOS SETUP UTILITY................................................................................................................................................... 105
(1) BIOS SETUP PROGRAM .............................................................................................................................................................................105
(2) BIOS SETUP...............................................................................................................................................................................................108
6. TROUBLESHOOTING.................................................................................................................................................... 131
(1) NETWORK ISSUES..................................................................................................................................................................................... 131
(2) MSR ISSUES .............................................................................................................................................................................................. 131
(3) USB ISSUES ............................................................................................................................................................................................... 131
(4) LCD ISSUES ............................................................................................................................................................................................... 131
(5)TOUCH-SCREEN ISSUES............................................................................................................................................................................132
(6) POWER ISSUES .........................................................................................................................................................................................132
(7) PS/2 KEYBOARD ISSUES............................................................................................................................................................................132
(8) BOOTING ISSUES ......................................................................................................................................................................................132
7. MAINTENACE..............................................................................................................................................................133

3
POSBANK Use’r manual Revision History
Changes to the BLUO D25 Use’r manual are listed below.
Rev No.
Revision History
Date /author
BLUO_D25_UM_eng_PBUM_(Rev001;140221)
D25
2014.07. 18
BLUO_D25_UM_eng_PBUM_(Rev002;140926)
D25
2014.09.26

4
Specification
BLUO D25
CPU
Intel Atom processor D2550 (1MB Cache, 1.86 GHz, Dual Core for
Cedarview-D)
Chipset
Intel NM10
Storage
SATA2(3Gb/s) 2.5 inch HDD or HDD (Max. 2 Optional)
-
Support AHCI
Memory
DDR3-1066MHz SODIMM 2GB (MAX. 4GB)
Graphic
Integrated Intel GMA HD 3650
AMT
-
Display
Resolution
15" LED Backlight LCD 250 cd/㎡(1024 x 768 resolution)
Touch screen
True Flat Capacitive or 5-wired Resistive Touch
Viewing angle
Internal I/O
USB
3 Ports (reserved for touch controller, MSR reader, mini PCIe)
Serial port
COM 5 (reserved for cash drawer port) & COM 6 (reserved for
MSR)
Display port
VGA & COM 4 (reserved for CDP)
Extension slot
Mini PCIe
Primary display
24bit LVDS
External I/O
USB
Rear 4
PS/2
1 Port (only for Keyboard)
Serial port
COM 1 ~ 3 with 5V/12V power output on 9pin
LAN
Realtek RTL 8111E Ethernet Controller
Audio
Realtek ALC 892 / Line-out, Mic-in
Display port
VGA x 1 port
Options
MSR
Comply with ISO 7811, Support 1 & 2 & 3 track
Speaker
2 x 0.8W (Stereo)
Side USB
4 Ports (USB 2.0)
Serial port
1Port
SCR
EMV level 1
Dallas
Dallas I-button reader
Back up battery
Smart battery (supports up to 1 packs)
Customer display
VFD type (20 x 2) Alphabet & numeric
2nd LCD
10.1" LCD or 12.1 LCD (1024 x 768 resolution)
2nd storage
2nd HDD / HDD storage
Cash drawer port
1 Port (RJ11 shared with COM5)
Parallel port
1 Port
WiFi
Mini PCIe for wireless LAN
OperatingTemperature
0 ℃~ 40 ℃at 10% ~ 80% humidity
Storage Temperature
-20 ℃~ 60 ℃at 10% ~ 80% humidity
Qualification
CE, FCC, KC
Power
Adapter 12V/ 5A
OS Support
Windows XP/Vista, Windows 7, POS Ready 2009, POS Ready 7
Dimension (W x H x D)
415 x 305 x 385(mm), 16.3 x 12 x 15.1(inch)
*Product specifications may differ according to region and may be changed without prior notice.
*MSR is not supported PS/2 interface

5
Specification –Outside size

6
Preface
This User's Guide gives information about main unit/IO port layout, basic setup, component installation, and board
layout for point of sale system "BLUO D25"
Intended Audience
The User's Guide is intended for technically qualified personnel.
It is not intended for general audiences.
Document Organization
The chapters in this Product User’s manual are arranged as follows:
1. product package contents
2. system configuration
3. Harness (cable connector)
4. BIOS Setup
5. Installing and Replacing POS SYSTEM Components: instructions on how to install the motherboard and
other POS hardware components.
6. Product specification

7
SYMBOL; MARK
CE MARK
This device complies with the requirements of the EEC directive 2004/108/EC with
regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage Directive”.
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
KC
Korea Certification mark.
Certificate No. -
WEEE
Recycling and disposal of electric and electronic devices and their components
This product should not be mixed with other commercial wastes for disposal.

8
Copyright
This publication, including all photographs, illustrations and software, is protected under international copyright law
with all rights reserved to the manufacturer. Neither this manual, nor any of the material contained herein, may be
reproduced without express written consent of the author.
BLUO D25 and POSBANK are trademarks of POSBANK Co., Ltd. in the United States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright©POSBANKCo., Ltd. All rights reserved.

9
Warranty
We guarantee our POS terminal product and its parts against defects in materials and workmanship, under proper use,
for a standard period of 2 years from the original date of purchase.
During this period, we will repair or replace defective and/or faulty products or parts without charge to the customer
for parts and labor.
The 1st year includes servicing and new or refurbished replacement parts free of charge, with one-way shipping costs
borne by the seller. The customer shall, however, be responsible for the return delivery costs. The 2nd year also
includes free of charge servicing and parts, but a limited warranty requires the entire shipping cost to be borne by the
customer.
Products out of the warranty period or scope shall be diagnosed at the customer's expense.
In the case of product damage due to error on part of the consumer, incorrect usage, carelessness or natural
phenomenon, the customer shall bear the full cost for both repair and delivery.

10
Safety Instructions
1. To disconnect the machine from the electrical power supply, turn off the power switch and remove the power
cord plug from the wall socket.
2. The wall socket must be easily accessible and in close proximity to the machine.
3. Read these instructions carefully. Save these instructions for future reference.
4. Follow all warnings and instructions marked on the product.
5. Do not use this product near water.
6. Do not place this product on an unstable cart, stand, or table.The product may fall, causing serious damage
to the product.
7. Slots and openings in the cabinet and the back or bottom are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These openings must not be blocked or covered.
8. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
9. This product should never be placed near or over a radiator or heat register or in a built-in installation unless
proper ventilation is provided.
10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the
product.

11
Notice
1. Always ensure that the correct power voltage is used as a precaution against fire and electrical shock.
2. Avoid exposing product to direct sunlight. Do not use product in areas of high humidity.
Doing so may cause low reliability and/or operational malfunction.
3. Be careful of static electricity on PCB of system with anti-static appliances. Doing so may cause inferior
reliability and shorted product life.
4. Keep product away from highly static areas. This may lead to inferior performance and reduced life cycle.
5. Do not interfere with, or obstruct metal components inside product. Doing so may cause the risk of fire or
electric shock.
6. Do not pull on power cable or peripheral devices’ connector cable. Doing so may cause fire, electric shock or
electronic system malfunction.
7. Use caution when around other electronic devices with possible high frequency or electro-magnetic effects
e.g. Audio, Electronic-range etc. Doing so will lead to the serious risk of product malfunctioning or a system
error occurring.
8. Ensure that batteries are replaced correctly. Failure to do this may result in sudden explosions.
9. Dispose of used batteries properly according to the instructions.

12
Liability Limitation
●Installation and maintenance
We recommend that you inquire about product installation, maintenance and repair service from the official service
center and agent office.
POSBANK takes no responsibility for malfunctions or system errors occurring after service and/or system check carried
out by unofficial service providers.
●High frequency appliances
This product is qualified by FCC, CE and KC compliances, and is thus governed by these qualifications’ safety
regulations.
However, the product can affect and be affected by other high frequencies generated around it. As such, POSBANK
does not consider liability for any system error or disorder due to this issue.
●Electronic noise emitting equipment
We recommend using the product away from electronic noise emitting equipment such as heaters, motors, fluorescent
lights, TVs etc. as it may cause interruption or interference with normal operation.
●Installation location
For optimal performance, the product should be kept in an environment of lower than 65% humidity and in a
temperature of 10 ~ 30℃. Please also keep away from direct sun-light.
●Cleaning procedure
Cleaning with chemical based products (in particular those containing benzyl or chemical thinning agents) can damage
the exterior surfaces of the product. We recommend using a soft damp cloth and wiping gently, taking particular care
when dealing with the LCD display screen.
●Product limitations
1. The use of this product for anything other than POS tasks is strictly prohibited.
The product is not supported for regular PC and interface operation.
2. This product is for business use only, and not for usage in the home.
3. Both hardware and software are both fully configured.
4. Normal operating is guaranteed on a steady power connection.

13
Installation Recommendations
1. Avoid installing during thunderstorms. (Possibility of dangerous exposure to electricity.)
2. Install away from damp spaces or water-leaks.
3. Beware of static occurrence during installation.
4. Use only ground connected and quality certified power cords and cables.
5. Keep out of direct sun-light, extremely high or low temperatures, or high humidity areas.
6. Install product away from areas prone to shocks or vibration.
7. Install product away from sewing machines, welding equipment, electric stoves, audio equipment and other
high frequency generating equipment.
8. Installation and use in close proximity to an air-conditioning unit is not recommended.
9. Do not connect cables underneath carpets or floorboards.
10. Only use power cables supplied by pre-approved and certified venders.
11. Never use power cords from high power source appliances.
e.g. Electronic heaters, Electric stoves, Audio equipment, Air-conditioners, Refrigerators etc.
12. The use of multiple connections in a shared power outlet/socket is not recommended.

14
1.ProductOverview
(1) InsideYour Package
1. Please check your package and confirm its contents.
2. The POS terminal main unit, power cable, user manual and driver CD are included in the package. If any items
are missing or damaged, please contact your dealer for assistance.
» All user manuals and drivers are available for download on our website: www.posbank.com
BLUO D25Main unit
Adapter / Power cord
Installation guide
DriversCD

15
Optional Devices: 2nd LCD monitor 12.1”
Optional Devices: 2nd LCD monitor 10”

16
Optional Devices: CDP (Customer display)
Optional Devices: CDP (Customer display)
(2) Pre-installation Preparation
1. Remove protective film from touch-screen to prevent possible operating difficulties.
2. Attach all optional parts before setting up the main POS unit.
(3) Product Outline
•Each part of product may differ depending on the specific POS model.
•Model-specific data sheets are provided on our website at www.posbank.com

17
(4) Configuration
Refer to following diagram to identify the components on this side of the system.
Front view
1. LCD MONITOR & Touch panel display
2. LAN LED
3. Storage(Default: HDD) LED
4. Power LED
5. Magnetic stripe reader(MSR); Option
6. Smart card reader(SCR); Option
7. Dallas I-button reader; Option
8. Power switch
2
2
3
3
4
4
5
5
6
6
7
1
1
8

18
Side view
1. I/O port cover
2. Storage (Default: HDD)
3. Customer display; Option
4. USB port ; Option
1
4
2
3

19
(5) I/O port: Details
* I/O ports may differ according to product model or options.
I/O view
1. Raise the I/O COVER.
1
I/O view
1

20
Standard I/O port