PotteryBarn Double Cabinet Wall Art User manual

The hardware included with this item is meant for drywallor
stud mounting only. If yourwalls are made from concrete,
brick or plaster, please consult your local hardware store for
assistance in selecting the appropriate hardware.
Double Cabinet Wall Art
Mounting Instructions
Hardware:
Hanging Orientation Options:
Mounting Instruction:
Measure the distance between the center of the two keyholes. With the back of the Double Wall Cabinet
facing away fromthe wall, hold it against
the wall at a desired mounting location. Mark two
reference points (A, B) on the wall as shown.
TOOLS NEEDED (not included):

Connect the two points (A, B) with a light pencil line. Use a level to ensure that the line is level.
Make two insertion marks (C, D) centered along the line using the measurement “a”.
Use a stud-finder to determine if there is a wall stud[s] located at [each] either insertion mark.
Install the proper hardware, as show n below . Note that the head of each screw resides about 3/8” from the w all.
Dry Wall Mounting
With the help of another person, hang the item to the wall so that the keyholes engage the screw heads.
Care Instructions:
Dust often with a soft, dry cloth
Avoid using strong chemical or abrasive cleaners.
Thank you for your purchase
Stores/catalog/www/potterybarn.com
Stud Mounting