Powakaddy Twinline 4 User manual

APvcgrip
B Scorecard holder
C Handle tube
D Upper bag holder bracket
E Adjustable handle mechanism
F Main upper frame tube
G Connecting rods
H Leg bracket
I Slippery connecting rods
J 2 holes leg frame
K 4 holes leg frame
L Right weight stabilizer
L1 Left weight stabilizer
M Right wheel locking mechanism
M1 Left wheel locking mechanism
NAnti-splay wire
P Main wheel
Q Main lower frame tube
R Lower bag holder bracket
S Front wheel assembly
T Umbrella holder base
U Umbrella holder storage rack
V Umbrella holder
PARTS LIST MAINTENANCE
To clean to the cart, wipe with a soft, dry cloth. Car polish may be
used to maintain finish. Lubricate moving parts every 6 months.
Warning:
For your own safety, please read and understand these warnings and keep
this user guide for future reference.
Always make sure the cart is fully extended and locked before use.
Always make sure the cart is folded and locked properly before lifting or
transporting.
Do not run while using this product.
Do not use accessories other than those designed for use with this cart.
Keep all packing materials away from children and recycle where possible
or where required by law.
USE THE BRAKE
Fig.1
To put in use：
Simply attach the umbrella holder onto
the cart as in Fig. 2＆3
To store：
A
ttach the umbrella holder to the storage rack
on the handle as in Fig. 4＆5
Push on the brake pedal to
stop the rear wheel and pull
off to release as in Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
UMBRELLA HOLDER

Fig.6
GC332503
UNFOLDING
FOLDING
Fig.7
Fig.14
Fig.8 Fig.9 Fig.10
Fig.11
Fig.15
Lift the upper bag
holder bracket as
Fig.6
Fig.13
button
Fig.12
Make sure the handle height
adjusting knob is fully tighten ,
then pull the handle and upper
bag bracket as shown in Fig. 7 to
extend the cart.
A
s shown in Fig 8, press the
button and rotate the front
wheel 180 degree clockwise so
the front wheel is at center of
the cart.
Release the wheel locking
buckle, insert the wheel axel
into the wheel holder
completely and then tighten the
locking buckle as Fig.9 The cart is fully extended as
shown in Fig. 10
Press the button and rotate the
front wheel 180 degree
counterclockwise so the front
wheel is on the left of the front
wheel fork (when you look
behind the cart) as Fig11.
Make sure the handle height adjusting knob is fully tighten ,
slightly lift up the handle as Fig. 12 ,and then press the
folding button and push the handle downward as shown in
Fig. 13 .
Fold down the upper
bag holder bracket as
Fig.14
The cart is fully
folded as Fig.15.
knob
knob

Front Wheel Adjustment
If the cart veers to the right:
Step 1: Face the front wheel of the cart and use the provided
Allen wrench to loose the two side screws as in Fig.B.
Step 2: Then use the Allen wrench to adjust the front bolt
clockwise until the front wheel is centered as in Fig.C. Then
tighten the two side screws as in Fig.D.
If the cart veers to the left:
Step1: The same as above.
Step 2: Adjust the front bolt counterclockwise until the front
wheel is centered as in Fig.C. Then tighten the two side screws
as in Fig.D.
Fig.C
Fig.D
Fig.A Fig.B
Left Right