manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Powernail
  6. •
  7. Tools
  8. •
  9. Powernail Powerjack 500 User manual

Powernail Powerjack 500 User manual

Read this manual before you use this Powerjack. Follow all safety warnings and instructions. If you
are uncertain about the operation of the Powerjack, call us directly at 1-800-323-1653 for assistance or
contact the closest Powernail Dealer for help. Please retain this information for future reference.
REV 19.04.18
MODEL 500 Powerjack
User Manual
POWERNAIL
®
CO.
1300 Rose Road, Lake Zurich, IL 60047
Phone: 1-800-323-1653
www.powernail.com
™
The Model 500 Powerjack is used to either push or pull hardwood
fl ooring strips into place. The Powerjack can be left in place, hands
free, while that seciton of fl ooring is being nailed down.
WARNING
Model 500 Powerjack
2
To Use:
1. Only push against a stationary surface such as a wall stud. When between wall
studs, push against a board long enough to span the distance of the studs so as to
prevent breaking through the drywall.
2. Ratchet the lever handle until faceplate contacts the stationary surface
3. Continue to ratchet until the self-adjusting jaw draws the fl oor tight for nailing
4. The Powerjack 500 can be left in place, hands free, while that section of fl ooring
is being nailed down.
5. When using the Powerjack mid-fl oor, screw the base plate to the subfl oor in front
of your fl ooring and use the Powerjack to push against your fl ooring strips.
To release:
To release the Powerjack 500, push the handle to the full forward position.
The POWERJACK Model 500 is designed to push or pull fl ooring strips into place
and hold them tightly.
Easy to operate! Use the lever handle to ratchet the faceplate against a stationary
surface. Continue to ratchet until the self-adjusting jaw draws the fl ooring to the
desired position. The POWERJACK can be left in place while you nail down the
fl ooring strip. To release the POWERJACK, simply push the handle to full forward
position.
The Model 500 POWERJACK sits on top of your fl ooring and gains leverage against
a wall or a wall-stud. When a stud location cannot be determined, a board long
enough to span the distance of the studs should be used to prevent breaking through
the drywall (picture 1).
When not near a wall, the Model 500 can also be used mid-fl oor by screwing the base
plate directly to the sub fl oor and pushing against your fl ooring strips.
(see picture 2).
Under the toe kick of a cabinet, the POWERJACK Model 500 can be used to tighten
boards and hold them in place (see picture 3).
The Powerjack 500 self adjusts to the thickness of the wood fl ooring being installed.
Powerjacks™ are made in the USA
When near a wall, only push against a
stationary surface such as a wall stud.
When wall stud locations cannot be
determined, push against a board long
enough to span stud spacing to prevent
breaking through the drywall
(see picture 1).
The Model 500 can be used mid-fl oor
by screwing the base directly to the sub
fl oor and pushing the fl ooring strips
into place (see picture 2).
When under the toe kick of a cabinet, the
Powerjack Model 500 tightens boards and
holds them in place hands-free while that
section of fl ooring is nailed down (see
picture 3).
Picture 2
Picture 1
3
Picture 3
16
19
13
6
8
20
12
2
4
18
5
15
9
3
1
11
17
22
21
10
7
14
Model 500 Powerjack Safety
POWERNAIL
®
CO.
Model 500 Powerjack Exploded View
Always use approved eye protection.
Keep fi ngers away from gear area.
Do not hit the ratchet handle with a mallet.
Do not over torque.
PART NAME PART NO.
1. KNOB 08-10000010
2. HANDLE 08-10000020
3. RATCHET SHAFT 08-10000030
4. RATCHET SPRING 08-10000040
5. GEAR SHAFT 08-10000050
6. GEAR 08-10000060
7. GEAR SHAFT NUT 08-10000070
8. COTTER PIN 08-10000080
9. PAWL BUSHING 08-10000090
10. PAWL PIN 08-10000100
11. PAWL #1 08-10000110
12. PAWL #2 08-10000120
13. PAWL SPRING (2) 08-10000130
14. CAP SCREW 08-10000140
15. RACK ASSEMBLY 08-500232A
16. BASE PLATE 08-50000250
17. HOUSING 08-50000180
18. HOUSING SPACER 08-50000190
19.1/4-20 x .625 S.H.C.S. (x4) 08-50000270
20. HOOK 08-50000260
21. PIN 08-50000280
22. SET PIN 08-50000220
REPAIR KIT PART NO.
TUNE-UP KIT 08-100TUKIT
Visit our web page at www.powernail.com

Other Powernail Tools manuals

Powernail PowerStapler 1845F User manual

Powernail

Powernail PowerStapler 1845F User manual

Powernail FLEX Conversion Kit User manual

Powernail

Powernail FLEX Conversion Kit User manual

Powernail 445FS User manual

Powernail

Powernail 445FS User manual

Powernail 50M FLEX MANUAL POWERNAILER User manual

Powernail

Powernail 50M FLEX MANUAL POWERNAILER User manual

Powernail 15FS User manual

Powernail

Powernail 15FS User manual

Powernail 445FS User manual

Powernail

Powernail 445FS User manual

Powernail 50P FLEX Installation guide

Powernail

Powernail 50P FLEX Installation guide

Popular Tools manuals by other brands

Ingersoll-Rand 2DA Series Operation and maintenance manual

Ingersoll-Rand

Ingersoll-Rand 2DA Series Operation and maintenance manual

ReelCraft L 4525 123 7A operating instructions

ReelCraft

ReelCraft L 4525 123 7A operating instructions

Senco SFT10XP operating instructions

Senco

Senco SFT10XP operating instructions

John Crane 48 Series installation instructions

John Crane

John Crane 48 Series installation instructions

ADS TRS Quick installation guide

ADS

ADS TRS Quick installation guide

SUHNER LLG 4 Technical document

SUHNER

SUHNER LLG 4 Technical document

U-Line H-3402 quick start guide

U-Line

U-Line H-3402 quick start guide

resideo Braukmann EA122A quick start guide

resideo

resideo Braukmann EA122A quick start guide

HS-Technik PowerRiv HST-PR manual

HS-Technik

HS-Technik PowerRiv HST-PR manual

REED True Peel operating instructions

REED

REED True Peel operating instructions

Atlas Copco RT user manual

Atlas Copco

Atlas Copco RT user manual

REMS Magnum 2000 RG-T instruction manual

REMS

REMS Magnum 2000 RG-T instruction manual

Kreg DB110 Instructional manual

Kreg

Kreg DB110 Instructional manual

Alemlube WP1290 Owner technical manual

Alemlube

Alemlube WP1290 Owner technical manual

CINCH OPM1730 user manual

CINCH

CINCH OPM1730 user manual

TREND BS/JIG manual

TREND

TREND BS/JIG manual

YATO YT-82320 instruction manual

YATO

YATO YT-82320 instruction manual

Helios H-45L Operation manual & spare parts list

Helios

Helios H-45L Operation manual & spare parts list

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.