PPI ODPM-48 User manual

ODPM-48
Optical DWDM Power Meter
Operating Manual

CONTENTS
1. Introduction ····························································································· 4
1-1. Special Features ·········································································· 4
1-2. Accessories ···················································································· 5
1-3. Optical Standards ········································································ 6
1-4. Specifications ················································································ 7
1-5. Charge Method ············································································· 8
1-6. Safety information ········································································ 9
2. Getting Started ···················································································· 10
2-1. Explanation of user interface and operating keys ·········· 10
2-2. Screen Information ···································································· 11
2-3. Menu ······························································································ 19

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 4
1. Introduction
1.1 Special Features
- Automatic wavelength & Power detection
- Compact size and light weight for portable
- Easy for hand operating
- Storage of large data
- Auto shut off function
- Fast response
- High-quality graphics
- CE approved

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 5
1.2 Accessories
Description Quantity
Body 1 EA
Body Rubber Case 1 EA
USB Data cable 1 EA
Typical 5pin charger 1 EA
User’s Manual 1 EA

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 6
1.3 Optical Standards
- Wavelength
- Optical Power
- Optical Connector
Optical connector interchangeable adapter.
FC, ST, SC, LC
Parameter Unit Specification
Number of Channels 48
Channel Spacing GHz 100
Channel Frequencies THz fc 196.4 ~ 191.7
(1526.43 ~ 1563.86 nm)
Parameter Unit Specification
Range of display dBm +10 ~ -40
Accuracy dB ±1.0@ -30
Resolution dB 0.01
Measuring unit dB / dBm

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 7
1.4 Specifications
- Input voltage : 1800mAh 3.7v
- Current consumption : MAX 0.25A
- Electric consumption : MAX 0.925W
- Weight : 300g
- Width : 77.9mm
- Length : 154.9mm
- Display size : 2.8 inch
- Operating Temperature
: -20 ~ +55℃ ℃
- Guaranteed time of operating
: 420 mins when fully charged
- Relative Humidity
: ~90% RH from 0 ~ 40℃

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 8
1.5 About the charger
A rechargeable battery is installed inside the measuring instrument, and this
charger module has the MOI (Ministry of Information) and Communication
standard 5 pin charger phot. Connect the connecting point to the top of the
ODPM-48 after the included cable is connected to the charger.
Standard 5pin charger
This charger is subject to change※
- Charging conditions :
LED Color Action of LED Conditions for battery charge
Red ON Charging
Green ON Fully charged

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 9
1.6 Safety information
Be sure to read this manual, and please use your equipment. The safety of the
equipment is directly affected the life and performance.
Please confirm the following safety precautions. If you didn’t follow the safety
precautions, you may not receive free A/S.
- Do not subject its body to strong impact or immerse in water.
- Do not disassemble or remove the equipment at random.
- Before inserting the optical connector into the equipment, be clean the
connector. (with Isopropyl alcohol)
- After using the equipment, Put on the Dust Cap for dust protection.
- Be careful not to go in the water equipment.
- After using the equipment, please be sure the switch off.

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 10
2. Getting Started
2.1 Explanation of user interface and operating buttons
Buttons Function
Backlight Power ON/OFF
PM Power Display
DWDM Scanned dBm value of the wavelength is represented
as a data.
SCAN Wavelength is scanned and dBm value is represented.
dB/dBm Each time you press the key, dB and dBm are
repeated.
▲ Up arrow
Graph Scanned dBm value of the wavelength is represented
as a graph.
Recall Recall data
ENTER Enter
Save Data Save
ESC Cancel
▼ Down arrow
MENU Set up and Data delete

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 11
2.2 Screen Information
1) Power ON / OFF
- To turn on and off.
- If you press the (Backlight) button more than 2 seconds, the logo shown
below appears and it moves to ‘Power Meter’ page.
- Press the (Backlight) button more than 2 seconds to turn the power off.

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 12
2) Power Meter
- Power Measurement is divided into ‘Auto’ and ‘Manual’. If you select 'Auto', the
largest value are shown after the measurement.
- Use the arrow keys to different values can be found.
- When you choose ‘Manual’, it displays the wavelength which user is used to
determine.
- In the above screen, Click (PM) button, you can insert any wavelength to
be measured. And click (Enter) button.

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 13
- If you want to re-select ‘Auto’, click (PM) button .

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 14
3) DWDM
- Press the (DWDM) button, then the display will show as the figure below.
- ‘DWDM’ is divided into ‘Auto’ and ‘Manual’.
- The moment you click on the (DWDM) button, the light source is scanned
only once in Manual mode.
- You can select the different wavelengths using ,
- The moment you click on the (DWDM) button, the light source is scanned
real-time in Auto mode.
- Selection of Manual and Auto can be done by this button (MENU).

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 15
4) SCAN
- Press the (SCAN) button, the light source is scanned and the dBm value
is displayed.
- You can select the page using , .

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 16
5) dB/dBm
- The light source is based the moment you press the (dB/dBm) button.
In other words, the light source is 0.00 dB.
- Then it measure automatically dB of light source.
- If you want to re-select ‘dBm’, click (dB/dBm) button .

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 17
6) Graph
- If you press the (Graph) button after scanning, a graph shows like the
below.
- If you press the (Graph) button again it returns to text mode.

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 18
7) Recall
- Press the (Recall) button, you will recall the data which you have
measured and saved.
- Press the (Enter) button to select the data you want, the screen display
stored data.

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 19
8) Save
- When you press the (save) button, the following message shows and
asks the name of the data, and the data based on the current data and time is
saved if you press the (Enter) button.
- If you want to stop saving, press (ESC).

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 20
2.3 Menu
If you press the (Menu) button, it changes to a screen where you can
configure the operating environment of ODPM-48.
- The menu consists of ‘SCAN SET’, ‘Select Lambda’, ‘Off Set’, ‘Auto Power
Off’, ‘Time Set’, ‘Data Delete’, ‘Data Format’, ‘System Info’, ‘Scan Display’,
‘SCAN Mode’ and ‘Threshold’.

PPI Inc. http://www.ppitek.com. TEL : [phone], FAX : [phone]
958-10, Daechon-dong, Buk-Gu, Gwangju, 500-470, Korea Rev. 1.2
PPI Inc. Proprietary
Print date : March. 12. 2013 21
1) Scan Set
- When you choose the SCAN Set, ‘All Scan’, ‘Selected’ are displayed.
- ‘All Scan’ is registered 48 wavelength.
- ‘Selected Lambda’ is registered user-selected wavelength.