Precor C954i Installation and operating instructions

P/N 47689-101
March 3, 2004
Owner’s Manual Addendum
C954
i
Thisaddendumaccompaniesyour C954i/C956iOwner'sManual
and describes some aspects of the C954i product that are not
presented in the manual.
The C954i treadmill comes equipped with four programs:
• Manual (MANL)
• Random (RAND)
• Cross Country (XCTR)
• Fitness Test (FIT)
Important: The Fitness Test does not appear unless it has been
"enabled" by club personnel. Please refer to the C954i/C956i
Owner's Manual section, Removing or Providing a Fitness Test.
The C954i display and keypad as shown in Diagram 1 has a
slightly different display than the C956i. The C954i display does
not exhibit the program profile during a workout. As a user works
out, a visual affirmation of progress is available through the
workout statistics being displayed.
AnexplanationofeachprogramontheC954inotdescribedinthe
owner’s manual is provided on the opposite side of this page.
Diagram 1 C954i display

Tochooseaprogram,telltheusertobeginatthePrecorbannerand
press ENTER. Follow the user-friendly display prompts. Use the
arrow keys to display the available programs. Once the program
appears on the display, press ENTER to select it and to continue
the setup process.
Note: Refer to Quick Steps to Working Out in the C954i/C956i
Owner's Manual for more information.
RANDOM PROGRAM
On the C954i, the Random program (RAND) offers a different
regimeneverytimeitischosen.Ausermightusethisprogramfor
achangeofpace.Theprogramsegmentsarepresetandmaintain
a specified incline.
Theincline beginslevel, atzero, forthe firstsegment andcannot
exceed 7 percent throughout the course. The maximum incline
change allowed between segments is plus or minus 4 percent.
Within these confines, a user can override the preset segments
using the INCLINE ▼▲ keys.
IfausersetstheTIMEfortheRandomprogramasINFINITE,the
user needs to press the red STOP button to end the workout.
Note: If a user chooses a time frame of INFINITE, a cool-down
perioddoesnotautomaticallyoccurwhentheworkoutisstopped.
Remindusersto always incorporateacooldown periodintotheir
workout. Mention that they can use the QUICKSTARTTM feature
to access the Manual program (MANL) and cool down.
CROSS COUNTRY PROGRAM
The Cross Country program (XCTR) is a 30-minute program that
simulates hills and vales. The incline is preset. A user can make
changes to the running belt speed using the SPEED ▲▼ keys and
eventhepresetinclinecanbeoverriddenusingtheINCLINE▼▲keys.