Pregis AirSpeed SMART Installation and operating manual

socket
Air Cushion Technology
V.4
AirSpeed™ SMART
Quick Start User Manual
and
Safety Guide

2 of 10
Safety Guide
PEOPLE
1. All personnel shall receive training and review manual prior to
operating equipment.
2. Only authorized personnel may use the equipment. All persons under
age 18 will be supervised.
3. Only trained authorized persons will carry out any adjustments,
repairs, maintenance or cleaning with the equipment isolated from
power supply, no longer in motion and allowed to cool.
4. Keep hands and fingers away from any openings, knife blades, hot
surfaces and moving parts of the equipment.
5. Restrict access to authorized personnel. Authorized operators shall
know the limitations of equipment and shall only use as intended.
6. Manual handling of Air Cushion equipment and ancillaries shall be in
accordance with the operator’s manual.
DEVICE
7. Ensure equipment is positioned securely and does not obstruct
evacuation routes.
8. Noise emissions for the AirSpeed™ SMART shall not generally exceed
62 db(A).
9. Check prior to use that all guards and safety devices including switches
are fully functioning.
ENVIRONMENT
10. Equipment shall be on work equipment inventory for regular
inspection, maintenance and testing.
11. All cables shall be routed so as not to be a slip or trip hazard.
12. Keep all film material off the floor to avoid a slip or trip hazard.
13. Avoid all sources of ignition. No smoking.
14. Good Housekeeping standards shall prevail and work area should be
kept clear at all times.
15. Adequate lighting shall be provided where natural light is insufficient.
Using the AirSpeed™ SMART Air Cushion Machine

3 of 10
Loading Film
1. Load Roll onto Spindle.
2. Raise Handle.
1
2
3. Thread Film Opening onto
the Tube.
3
4. Pull Film Through Seal Area.
4
5. Lower Handle.
5

4 of 10
Starting the AirSpeed™ SMART
2
2. Press Foot Switch.
OR
1
1. Turn power On.
2. Press Start Button.
2

5 of 10
Adjusting AirSpeed™ SMART
Adjust Run Time
Adjust Air Flow
Increase
Decrease
1. Press Increase or Decrease.
1
1. Press Menu Button.
2
Press
2. Press Increase or Decrease.
Increase
Decrease

6 of 10
AirSpeed™ SMART Error Messages
Film Jam/Empty
1
3. Load Spindle or Rethread.
!
2
3
1. Out of Film or Jam.
2. Error Message.

7 of 10
AirSpeed™ SMART Error Messages
Jaws Open
!
1. Handle Raised.
1
2. Error Message.
2
3
1. Lower Handle.

8 of 10
Replacing Seal Belts
3. Press Front Wheel to Remove Top Belt.
1. Unplug Machine.
1
2
3
2. Raise Handle.
5. Reverse Process with New Belts.
4
4. Press Front Wheel to Remove Bottom
Belt.

9 of 10
Weight (Machine): 30 lbs (13.64kg)
Size: 22” x 12.75” x 14”
Supply: 115/230V AC 50-60Hz
Amps: 2.0 A (110V) –1.0 A (230V)
Noise Level: 60 dba @ 1 meter
Production Speed: 30 feet per min / 9.14 meters per min
Specifications
17.75”
324mm
25”/ 635mm
11.25”
286mm
15.75”/400mm

10 of 10
Notes