Pride Mobility QUANTUM REHAB Euro Seat 2 User manual

www.pridemobility.com
Euro Seat 2
ACN# 088 609 661
Illustrated Parts Breakdown
CO
NOTA IMPORTANTE:
ES IMPRESCINDIBLE INDICAR EL Nº 
DE SERIE PARA CUALQUIER 
CONSULTA

Euro Seat 2
2 Rev.E/011110
Copyright © 2010
Pride Mobility Products®Corporation
www.pridemobility.com
INFMANU3780/Rev.E/011110
Your new Pride Illustrated Parts Breakdown (IPB) Manual has been compiled from the latest product information available
at the time of publication. Pride Mobility Products®Corporation reserves the right to make changes and updates to this
manual and to the product(s) it represents. Any changes, updates, or improvements to the product(s) may result in slight
differences between this manual and the product you purchased.
An IPB is an illustrated parts listing of all product components which have maintenance significance. IPB’s utilize
“exploded” drawings to detail the individual components for each assembly and an itemized list of reference numbers, part
numbers, descriptions, and quantities per assembly. Some parts may be included in an assembly but may not be available
for purchase separately. Refer to the parts list to locate the part numbers for assemblies and components for ordering what
you need.
To achieve proper identification and relationship of detail parts and next higher assemblies, parts listings are presented in a
convenient alphanumeric reference system. Reference numbers for parent assemblies identify one part number that can
be used to order all of the components listed within it. Components of an assembly will have the same alpha character as
its parent assembly.
For example, the parent assembly part number using reference number of A1 — A4 is the only number you need to
place an order for parts with references of A1, A2, A3, and A4. Instead of ordering 4 separate parts, use the parent
assembly part number to get the complete assembly.
Master assembly part numbers have reference numbers that include several subassemblies. By ordering parts using mas-
ter assembly part numbers, you can save a lot of time and reduce the chance for error.
For example, A1 — G10, a master assembly reference number, includes all components of assemblies A, B, C, D, E,
F, and G. Use caution when ordering assemblies. Check to see if a master assembly part number exists for the com-
ponents that you need. If an entire master assembly is not needed, then the individual assembly part number (i.e. for
reference number G1 — G10) will be sufficient to use for ordering.
Asterisks (*) and NOTES are used throughout this service manual to point out important information regarding assembly
structure and contents.
For example, in some illustrations, only the left OR right side is shown. In other drawings, only the front OR back is
depicted. The part numbers for ALL components are listed. An asterisk will also be used to indicate which components
are not illustrated. Illustrated Items without callouts are shown for assembly purposes.
Updates to the contents of this IPB will be made on a regular basis. Providers may retrieve updates immediately upon their
release by going to the Pride Service Website. The web address is www.prideservice.com. We welcome any questions or
comments regarding the new Pride IPB Manual that you may have.
Please note that all pricing that is included with this manual is subject to change without any prior notice from Pride.
Thank you for choosing products from Pride Mobility Products®Corporation.
Introduction

Euro Seat 2 3Rev.E/011110
This page is intentionally left blank.

Euro Seat 2
4 Rev.E/011110
SECTION I.
Sub Frame Assembly ...................................................................................................................................................... 6
SECTION II.
Seat Back Assembly
Quick Release Pin .................................................................................................................................................... 8
Snap Pin ...................................................................................................................................................................10
SECTION III.
Seat Base Assembly .......................................................................................................................................................12
SECTION IV.
Manual Recline Assembly...............................................................................................................................................14
SECTION V.
Static Tilt Assembly.........................................................................................................................................................16
SECTION VI.
Power Tilt and Recline Actuators ....................................................................................................................................18
SECTION VII.
Back Pan Assembly ........................................................................................................................................................19
SECTION VIII.
Seat Pan Assembly
Version 2 Clamps......................................................................................................................................................20
Version 1 Clamps......................................................................................................................................................21
SECTION IX.
Sling Back Assembly.......................................................................................................................................................22
SECTION X.
Joystick Receiver Blocks.................................................................................................................................................23
SECTION XI.
Headrest Assembly
Sling Back.................................................................................................................................................................24
Solid Back.................................................................................................................................................................25
SECTION XII.
Single Post Height Adjustable Armrest
Desk Length .............................................................................................................................................................26
Full Length................................................................................................................................................................28
Table Of Contents

Euro Seat 2 5Rev.E/011110
SECTION XIII.
Seat Cushions ................................................................................................................................................................ 30
SECTION XIV.
Back Cushions................................................................................................................................................................ 31
SECTION XV.
Lap Belt Assembly.......................................................................................................................................................... 32
SECTION XVI.
Tool Kit............................................................................................................................................................................ 33
SECTION XVII.
Electronics Assembly
Q-Logic Tilt and Recline (Version 1) ........................................................................................................................ 34
Q-Logic Tilt and Recline (Version 2) ........................................................................................................................ 36
Q-Logic Tilt............................................................................................................................................................... 38
Q-Logic Recline ....................................................................................................................................................... 40
VR2/Q-Logic Manual Tilt/Manual Recline ................................................................................................................ 42
VR2 Lighting ............................................................................................................................................................ 44
Q-Logic Lighting....................................................................................................................................................... 46
Table Of Contents

Euro Seat 2
6 Rev.E/011110
C1
A7
A1
A2
A5
A5
C2
C3
A4
A1
A2
C1
C2
C3
A2
A1
C4
C2
A4
A9
A7
A9
A7
A7
A8
B1
A1
A3
A6
B2
B2
C5
I. Sub Frame Assembly

Euro Seat 2 7Rev.E/011110
A1 - C5
A1
A2
A3
A4
A5
A6
A7
A8
A9
B1 - B2
B1
B2
C1 - C5
C1
C2
C3
C4
C5
REF #
FRMASMB15747
WASMETR1029
NUTNYLK1011
SCRHHCS1274
BLTASHL1192
DWR1005B028
DWR1501C088
WASMETR1031
NUTNYLK1090
SCRHHCS1402
FRMASMB11992
DWR1501E018
BSHFLNG1060
HDWASMB1152
BLTASHL1196
WASBELV1007
WASNYLN1094
WASMETR1031
NUTNYLK1090
PART #
SEAT FRAME,ASSY,R400,EUROSEAT2 INTERFACE,E-1501-083
WASHER,FLAT,BLACK ZINC,8.4MM ID X 16MM OD X 1.6MM
TH,METRIC,GB96-8
NUT,NYLOCK,BLACK ZINC,M8-1.25
SCREW,HHCS,BLACK ZINC,M8-1.25 X 25MM,GRADE 12.9
BOLT,SHOULDER,10MM X 45MM,GRADE 10.9
WASHER,BLACK NYLON,10.5MM ID X 16MM OD X 2.2MM TH,B-1005-
028
BATTERY SPACER BRACKET,BLACK,STANDARD,C-1501-088
WASHER,FLAT,BLACK ZINC,10.5MM ID X 20MM OD X 2MM TH
NUT,NYLOCK,BLACK ZINC,M10-1.5,GRADE 12.9
SCREW,HHCS,BLACK ZINC CHROMATE,M10-1.5 X 25MM,GRADE 12.9
MOUNT BRACKET,ASSY,SUB-FRAME,EUROSEAT 2,D-1501-009
MOUNTING BRACKET WELDMENT,SUB-FRAME,E-1501-018
BUSHING, FLANGE,BRONZE METRIC,12" ID X 18" OD X 8" LG
HARDWARE,ASSY,PIVOT TILT,EUROSEAT 2,C-1501-097
BOLT,SHOULDER,BLACK,12MM X 20MM,GRADE 12.9,D-1005-001
WASHER,BELLEVILLE,12.2MM ID X 25MM OD X 1.5MM TH
WASHER,BLACK,NYLON,12.2MM ID X 25MM OD X 2MM TH
WASHER,FLAT,BLACK ZINC,10.5MM ID X 20MM OD X 2MM TH
NUT,NYLOCK,BLACK ZINC,M10-1.5,GRADE 12.9
DESCRIPTION
1
6
4
2
2
4
1
8
4
4
1
1
2
2
1
2
1
1
1
QTY
N/A
2.68
2.68
2.68
N/A
2.68
N/A
2.68
2.68
N/A
N/A
N/A
N/A
N/A
N/A
N/A
2.68
2.68
2.68
MSRP (Euro)
11i
I. Sub Frame Assembly

Euro Seat 2
8 Rev.E/011110
E4
B4
B6
B5
D4
D3
D2
D1
B3B2
C5
C1
C3
C2
E2
E3
B4
B3
B1
E5
D5
D7
E1
E2
D6
D7
D5
A2
A3
A4
A5
D7
D5
D6
D5
D7
A5
A1
E2
E4
E3
E5
E2
C2
C3C5
C4
E1
C4
C1
D1
B3
D8
D8
II. Seat Back Assembly — Quick Release Pin

Euro Seat 2 9Rev.E/011110
A1 — E5
A1
A2
A3
A4
A5
B1 — C5
B1
B2
B3
B4
B5
B6
C1 — C5
C1
C2
C3
C4
C5
D1 — D8
D1
D2
D3
D4
D5
D6
D7
D8
E1 — E5
E1
E2
E3
E4
E5
REF #
SETASMB6089
DWR1005B191
BLTASHL1192
NUTNYLK1011
WASMETR1029
DWR1005B028
SETASMB6090
DWR1501E023
NUTNYLK1011
WASMETR1029
SCRHHCS1298
DWR1056B062
SCRSHCS1132
SETASMB6092
DWR1501C046
DWR1005B113
DWR1360B091
BSHFLNG1060
NUTNJAM1015
SETASMB6091
DWR1501C028
DWR1501D013
DWR1501E025
DWR1501E024
SCRASBH1260
RIVNUT1003
WASMETR1033
SCRASBH1148
HDWASMB1108
DWR1501B018
WASMETR1029
SCRHHCS1298
NUTNYLK1011
DWR1600A052
PART #
SEAT BACK,ASSY,EUROSEAT 2,E-1501-022
PIN,STAINLESS STEEL,QUICK RELEASE,B-1005-191
BOLT,SHOULDER,10MM X 45MM,GRADE 10.9
NUT,NYLOCK,BLACK ZINC,M8-1.25
WASHER,FLAT,BLACK ZINC,8.4MM ID X 16MM OD X 1.6MM
TH,METRIC,GB96-8
WASHER,BLACK NYLON,10.5MM ID X 16MM OD X 2.2MM TH,B-1005-
028
SEAT BACK,ASSY,LOWER,EUROSEAT 2,D-1501-014
SEAT BACK,LOWER FRAME WELDMENT,E-1501-023
NUT,NYLOCK,BLACK ZINC,M8-1.25
WASHER,FLAT,BLACK ZINC,8.4MM ID X 16MM OD X 1.6MM
TH,METRIC,GB96-8
SCREW,HHCS,BLACK ZINC,M8-1.25 X 50MM,GRADE 10.9
BUMPER,BLACK,RUBBER,6.5MM ID X 25MM OD X 32MM TH,SHORE
90 A,B-1056-062
SCREW,SHCS,BLACK ZINC,M6-1.0 X 25MM,GRADE 8.8
SEAT BACK,ASSY,WIDTH ADJUSTMENT PLATE,EUROSEAT 2,B-
1501-032
SEAT BACK,WIDTH ADJUSTMENT BRACKET WELDMENT,C-1501-046
PRESS IN SEAT BELT BOLT,B-1005-113
SNAP IN SPACER,B-1360-091
BUSHING, FLANGE,BRONZE METRIC,12" ID X 18" OD X 8" LG
NUT,NYLOCK JAM,BLACK ZINC,5/16-18
SEAT BACK,ASSY,UPPER,EUROSEAT 2,E-1501-026
SEAT BACK,PIVOT BRACKET WELDMENT,C-1501-028
SEAT BACK,ACTUATOR,MOUNTING BAR WELDMENT,D-1501-013
SEAT BACK,WELDMENT,RIGHT SIDE,E-1501-025
SEAT BACK,WELDMENT,LEFT SIDE,E-1501-024
SCREW,BHSCS,BLACK ZINC CHROMATE,M6-1.0 X 25MM
NUT, RIVET,1/4"-20,KNURLED,(MCMASTER-CARR: 95105A143)
WASHER,FLAT,BLACK ZINC,6.4MM ID X 12MM OD X 1.6MM
TH,METRIC,GB96-6
SCREW,BHSCS,BLACK ZINC,1/4-20 X 0.500",GRADE 8,W/NYLON
PATCH
STUD,ASSY,RECLINE PIVOT,EUROSEAT 2,B-1501-020
SPACER,BRIGHT ZINC,12MM OD X 8.13 MM ID X 20 MM THK,B-1501-
018
WASHER,FLAT,BLACK ZINC,8.4MM ID X 16MM OD X 1.6MM
TH,METRIC,GB96-8
SCREW,HHCS,BLACK ZINC,M8-1.25 X 50MM,GRADE 10.9
NUT,NYLOCK,BLACK ZINC,M8-1.25
SPACER,BLACK ZINC,STEEL,0.328" ID X 0.50" OD X 0.20" TH,A-1600-
052
DESCRIPTION
1
1
1
1
1
4
1
1
2
4
2
1
1
2
1
1
1
2
1
1
2
1
1
1
6
2
6
2
2
1
3
1
1
1
QTY
N/A
N/A
N/A
2.68
2.68
2.68
N/A
N/A
2.68
2.68
2.68
2.68
2.68
N/A
N/A
N/A
N/A
N/A
2.68
N/A
N/A
N/A
N/A
N/A
N/A
2.68
2.68
3
N/A
N/A
2.68
2.68
2.68
2.68
MSRP (Euro)
11i
II. Seat Back Assembly — Quick Release Pin

Euro Seat 2
10 Rev.E/011110
E4
B4
B6
B5
D4
D3
D2
D1
B3B2
C5
C1
C3
C2
E2
E3
B4
B3
B1
E5
D5
D7
E1
E2
D6
D7
D5
A2
A3
A4
A5
D7
D5
D6
D5
D7
A5
A1
E2
E4
E3
E5
E2
C2
C3C5
C4
E1
C4
C1
D1
B3
D8
D8
II. Seat Back Assembly — Snap Pin