Pro-Form Booty Firm PFBM11.0 User manual

USER’S MANUAL
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
CALL TOLL-FREE:
1-800-288-4802
Mon.–Fri., 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
Model No. PFBM11.0
Serial No.
Write the serial number in the space
above for reference.
Serial
Number
Decal

2
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS..................................................................3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ADJUSTMENT .............................................................................5
PART LIST/EXPLODED DRAWING .............................................................7
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WARNING DECAL PLACEMENT
This drawing shows the
location(s) of the warning
decal(s). If a decal is miss-
ing or illegible, see the front
cover of this manual and
request a free replacement
decal. Apply the decal in
the location shown.
Note: The decal(s) may not
be shown at actual size.

3
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on this product before using this product. ICON
assumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or per-
sons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of this product are adequately
informed of all precautions.
3. Use this product only as described in this
manual and in the included DVD.
4. This product is intended for home use only.
Do not use this product in a commercial,
rental, or institutional setting.
5. Keep this product indoors, away from mois-
ture and dust. Do not put this product in a
garage or covered patio or near water.
6. Place is product on a level surface, with a
mat beneath it to protect the floor or carpet
from damage. Make sure that there is enough
clearance around this product.
7. Inspect and properly tighten all parts each
time you use this product. Replace any worn
parts immediately.
8. This product should not be used by persons
weighing more than 250 lbs. (113 kg).
9. Keep children under age 12 and pets away
from this product at all times.
10. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on this product. Always wear athletic
shoes for foot protection while exercising.
11. Always stand on the platform while using
this product.
12. Use this product in a controlled manner; do
not release the leg lever while the resistance
cord is stretched.
13. Do not stand on the leg lever.
14. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
IMPORTANT PRECAUTIONS

4
ASSEMBLY
1. Slide the Upright (1) onto the Base (3). Attach
the Upright by tightening the Upright Knob (23)
into the Upright and the Base.
Next, secure the Upright (1) by tightening an M8
x 8mm Screw (31) into the Upright and the Base
(3). Note: If you plan to periodically remove the
Upright for transportation or storage, you may
choose not to attach the Screw.
2. Attach the Handle (5) to the Upright (1) with four
M4 x 15mm Screws (20).
3. Make sure that all parts are properly tight-
ened. Place a mat beneath the Base (3) to
protect the floor.
Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until
assembly is completed.
Assembly requires a Phillips screwdriver . To avoid damaging parts, do not use power tools
for assembly.
Thank you for selecting the innovative BOOTY FIRM™
lower body developer. The BOOTY FIRM lower body
developer is designed to let you enjoy a variety of fun
and effective exercises that firm, tone, and strengthen
the body.
For your benefit, read this manual carefully before
you use this product. If you have questions after
reading this manual, please see the front cover of this
manual.
BEFORE YOU BEGIN
20
20
23
5
1
3
31

5
ADJUSTMENT
HOW TO ADJUST THE RESISTANCE
The resistance of the Leg Lever (2) can be adjusted to
the desired level.
To adjust the resistance, first remove the Adjustment Pin
(10). To increase the resistance, slide the Adjustment
Bracket (7) downward to the desired position; to
decrease the resistance, slide the Adjustment Bracket
upward. Then, fully insert the Adjustment Pin into the
Adjustment Bracket and the Leg Lever (2).
HOW TO LOCK AND UNLOCK THE LEG LEVER
To lock the Leg Lever (2), insert the Lock Pin (11) into the
Upright (1) and the Leg Lever as shown at the right.
To use the Leg Lever (2), remove the Lock Pin (11) and
insert it into the storage hole in the Upright (1).
10
11
Storage Hole
7
2
2
1

6
NOTES

7
PART LIST/EXPLODED DRAWING Model No. PFBM11.0 R1211B
1
3
6
8
10
12
12
5
2
4
7
9
11
14
14
14
16
18
19
13
15
17
20
21
23
26
28
28
28
28
28
28
28
30
25
25
22
24
24
24
24
20
20
29
27
31
1 1 Upright
2 1 Leg Lever
3 1 Base
4 1 Platform
5 1 Handle
6 1 Resistance Cord
7 1 Adjustment Bracket
8 1 Pad
9 1 Pad Tube
10 1 Adjustment Pin
11 1 Lock Pin
12 2 Upright Bushing
13 1 Push Nut
14 4 M3 x 15mm Screw
15 1 Leg Lever Cover
16 1 Upright Cover
17 1 Pad Tube Cap
18 1 Leg Lever Cap
19 1 M8 x 15mm Screw
20 6 M4 x 15mm Screw
21 1 Pulley Plate
22 2 Pulley
23 1 Upright Knob
24 4 Base Foot
25 2 Platform Foot
26 1 Upright Spacer
27 1 M8 x 105mm Bolt
28 8 M4 x 10mm Screw
29 1 M8 Washer
30 1 M8 Locknut
31 1 M8 x 8mm Screw
* – User’s Manual
Note: Specifications are subject to change without
notice. For information about ordering replacement
parts, see the back cover of this manual. *These parts
are not illustrated.
Key No. Qty. Description Key No. Qty. Description

Part No. 322768 R1211B Printed in China © 2011 ICON IP, Inc.
ORDERING REPLACEMENT PARTS
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. Parts are warranted for ninety (90) days from the date
of purchase.
This warranty extends only to the original purchaser (customer). ICON’s obligation under this warranty is
limited to repairing or replacing, at ICON’s option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped
to a service center, freight charges to and from the service center will be the customer’s responsibility. If
replacement parts are shipped while the product is under warranty, the customer will be responsible for a
minimal handling charge. For in-home service, the customer will be responsible for a minimal trip charge.
This warranty does not extend to freight damage to the product. This warranty will automatically be voided
if the product is used as a store display model, if the product is purchased or transported outside the USA,
if all instructions in this manual are not followed, if the product is abused or improperly or abnormally used,
or if the product is used for commercial or rental purposes. No other warranty beyond that specically set
forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in con-
nection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or prots, loss of enjoyment or use, or costs of removal or installation; or other
consequential damages of any kind. Some states do not allow the exclusion or limitation of incidental or
consequential damages. Accordingly, the above limitation may not apply to the customer.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of
merchantability or tness for a particular purpose are limited in their scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to the customer.
This warranty provides specic legal rights; the customer may have other rights that vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813
LIMITED WARRANTY
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST/EXPLODED DRAWING near
the end of this manual)