Pro-Form 545 Ekg Elliptical User manual

USER’S MANUAL
CAUTION
Read all precautions and
instructions in this manual
before using this equipment.
Keep this manual for future
reference.
Model No. PFEVEL29832
Serial No.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are
committed to providing com-
plete customer satisfaction. If
you have questions, or if there
are missing parts, please call:
Or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: [email protected]
08457 089 009
Class HC Fitness Product

2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
HOW TO USE THE ELLIPTICAL TRAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
1. Read all instructions in this manual before
using the elliptical trainer.Use the elliptical
trainer only as described in this manual.
2. It is the responsibility of the owner to ensure
that all users of the elliptical trainer are ade-
quately informed of all precautions.
3. The elliptical trainer is intended for in-home
use only.Do not use the elliptical trainer in a
commercial, rental, or institutional setting.
4. Place the elliptical trainer on a level surface,
with a mat beneath it to protect the floor or
carpet. Keep the elliptical trainer indoors,
away from moisture and dust.
5. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
6. Keep children under the age of 12 and pets
away from the elliptical trainer at all times.
7. The elliptical trainer should not be used by
persons weighing more than 115 kg (250
lbs.).
8. Always wear appropriate clothes when
using the elliptical trainer. Always wear ath-
letic shoes for foot protection.
9. Always hold the pulse sensor or the handle-
bars when mounting, dismounting, or using
the elliptical trainer.
10. The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
11. The elliptical trainer does not have a free
wheel. Each time you stop exercising on the
elliptical trainer, allow the pedals to come to
acomplete stop before dismounting.
12. Always keep your back straight when using
the elliptical trainer. Do not arch your back.
13. If you feel pain or dizziness whilst exercis-
ing, stop immediately and cool down.
IMPORTANT PRECAUTIONS
WARNING:To reduce the risk of serious injury, read the following important precau-
tions before using the elliptical trainer.
WARNING:Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health
problems. Read all instructions before using. ICON assumes no responsibility for personal injury
or property damage sustained by or through the use of this product.

3
BEFORE YOU BEGIN
Congratulations for selecting the PROFORM®545
EKG elliptical trainer. The 545 EKG elliptical trainer is
an incredibly smooth exerciser that moves your feet in
a natural elliptical path, minimising the impact on your
knees and ankles. And the unique 545 EKG features
adjustable resistance, upper-body handlebars, and a
multi-mode console to help you get the most from
your exercise.
For your benefit, read this manual carefully before
you use the elliptical trainer. If you have questions
after reading this manual, please call our Customer
Service Department at 08457 089 009. To help us
assist you, please note the product model number
and serial number before calling. The model number
isPFEVEL29832. The serial number can be found on
adecal attached to the elliptical trainer (see the front
cover of this manual for the location of the decal).
Before reading further, please look at the drawing
below and familiarise yourself with the labeled parts.
Console
FRONT
BACK
LEFT SIDE
Pedal Arm
Wheel
Pedal Disk
Pedal
Upright
Water Bottle Holder*
*Water bottle is not included
Pulse Sensor
Fan
Side Shield
Handlebar
P
AVVERTENZA
ATTENTION
The decal shown here has been placed on the elliptical trainer. If the decal is missing or illegible,
call our Customer Service Department to order a free replacement decal. Apply the decal in the
indicated location.

4
Use the chart below to identify the small parts used in assembly. The number in parenthesis below each part
refers to the key number of the part, from the PART LIST on page 14. The number after the dash indicates the
quantity needed for assembly. Note: Some parts may have been pre-attached for shipping. If a part is not
in the parts bag, check to see if it has been pre-attached.
M4 x 16mm
Screw (52)–4 M4 x 19mm Flange
Screw (36)–6 M4 x 22mm
Screw (42)–2
Pedal Arm Bolt Set (40)–2
M8 x 45mm Button Bolt (50)–4
M10 x 75mm Carriage Bolt (34)–4
M10 x 76 mm Button Bolt (27)–2
M8.5
Washer (55)–2
M8.5 Large
Washer (35)–2
M10 Split
Washer (59)–4
M10 Nylon
Locknut (33)–6
M8 Nylon
Locknut (38)–6
M
Wave Washer
(75)–2
M8 x 25mm Patch
Screw (56)–2
ASSEMBLY
Assembly requires two people. Place all parts of the elliptical trainer in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Inaddition to the included hex key, assembly requires a phillips screwdriver , two adjustable
spanners , a rubber mallet , and a pair of pliers .

5
2. Whilst another person lifts the back of the Frame (1)
slightly, attach the Rear Stabiliser (9) to the Frame
with two M10 x 75mm Carriage Bolts (34) and two
M10 Nylon Locknuts (33).
33
1
2
34
9
33
1. Identify the Front Stabiliser (10). Whilst another per-
son lifts the front of the Frame (1), attach the Front
Stabiliser to the Frame with two M10 x 75mm
Carriage Bolts (34) and two M10 Nylon Locknuts
(33). Make sure that the Front Stabiliser is turned
so the Wheels (22) are not touching the floor.
1
1
10
22
22
33
34
3. The Console (23) requires four “D” batteries (not
included); alkaline batteries are recommended.
Remove the screw from the battery drawer,pull the
battery drawer open, and insert four batteries. Make
sure that the batteries are oriented as shown by
the markings inside the battery drawer. Close the
battery drawer and reattach the screw. Note: When
the batteries are installed correctly, the fan will turn on
for a moment.
3
23
Battery
Drawer
Batteries
4. Hold the Console (23) near the Upright (2). Connect
the console wire to the Upper Wire (44). Insert the
excess wire into the Upright.
Attach the Console (23) to the Upright (2) with four
M4 x 16mm Screws (52). Be careful to avoid
pinching the wires.
Attach the Water Bottle Holder (63) to the Upright (2)
with two M4 x 22mm Screws (42).
4
2
Console Wire
52
42
23
44
Screw
63

6
5. Whilst another person holds the Upright (2) near the
Frame (1) as shown, connect the Upper Wire (44) to
the Lower Wire (70).
Slide the Upright (2) onto the Frame (1); becareful
not to pinch the Wires (44, 70). Attach the Upright
with two M10 x 76mm Button Bolts (27), two M10
Split Washers (59), and two M10 Nylon Locknuts (33).
Do not tighten the Button Bolts yet.
44
27
33 59
70
5
2
1
Make sure that
the wires do not
get pinched and
damaged during
this step.
6. Identify the Left Handlebar (6), which is marked with a
sticker.Insert the Left Handlebar into one of the
Handlebar Arms (5); make sure that the Handlebar
Arm is turned so the hexagonal holes are on the
indicated side.Attach the Left Handlebar to the
Handlebar Arm with two M8 x 45mm Button Bolts
(50) and two M8 Nylon Locknuts (38). Make sure
that the Nylon Locknuts are inside of the hexago-
nal holes. Do not fully tighten the Button Bolts
yet.
Attach the Right Handlebar to the other Handlebar
Arm (not shown) in the same way.
6
6
5
50
38
Hexagonal
Holes

7
8. Apply a generous amount of grease to the axle on
the left Disc Crossbar (16). Slide the Left Pedal Arm
(11) onto the axle and attach it with an M8.5 Large
Washer (35) and an M8 Nylon Locknut (38).
Insert the left Handlebar Arm (5) into the bracket on
the end of the Left Pedal Arm (11), and attach it with
aPedal Arm Bolt Set (40).
Repeat this step to attach the right Pedal Arm (not
shown).
See step 6. Tighten the M8 x 45mm Button Bolts (50)
in the Handlebar Arms (5).
Tighten the two M10 x 76mm Button Bolts (27).
8
5
11
35
38
27
40
40
Grease
16
7. Apply a generous amount of the included grease to
the Pivot Axle (73) and to the two M8.5 Washers (55).
Next, insert the Pivot Axle into the Upright (2) and cen-
tre it. Reapply grease to both ends of the Pivot Axle.
Slide a Handlebar Spacer (47) onto the short tube on
each Handlebar (6, 8), and rotate the Handlebar
Spacers so the small arrows are pointing toward the
floor. Then, slide the Handlebars onto the Pivot Axle
(73). Make sure that the Handlebars are on the cor-
rect sides.
Tighten an M8 x 25mm Patch Screw (56) with an M8.5
Washer (55) and a Wave Washer (75) into each end of
the Pivot Axle (73). Next, orient the two Handlebar
Caps (46) as shown, and press the small tabs on the
Handlebar Caps into the two Handlebar Spacers (47).
7
2
75
73
Arrow
8
6
56 55
46
46
47
Grease
10. Make sure that all parts of the elliptical trainer are properly tightened. Place a mat under the elliptical
trainer to protect the floor or carpet from damage.
9. Find the Left Pedal (13), which has a ridge on the
right side. Attach the Left Pedal to the Left Pedal Arm
(11) with three M4 x 19mm Flange Screws (36) as
shown.
Attach the Right Pedal to the Right Pedal Arm (not
shown) in the same way. 11
9
13
36

8
HOW TO USE THE ELLIPTICAL TRAINER
HOW TO MOVE THE ELLIPTICAL TRAINER
Stand in front of the elliptical trainer, hold the handle-
bars firmly, and place one foot against one of the
wheels. Pull the handlebars until the elliptical trainer
can be moved on the front wheels, and carefully
move the elliptical trainer to the desired location.
Then, place one foot against a wheel and lower the
elliptical trainer. Due to the size and weight of the
elliptical trainer, use extreme caution whilst mov-
ing and lowering it.
HOW TO EXERCISE ON THE ELLIPTICAL TRAINER
To mount the elliptical trainer, firmly hold the pulse
sensor and carefully step onto the pedal that is in the
lowest position. Next, step onto the other pedal. Push
the pedals until they begin to move with a continuous
motion. Note: The pedal disks can turn in either
direction. It is recommended that you turn the
pedal disks in the direction shown by the arrow at
the right; however, for variety, you may turn the
pedal disks in the opposite direction.
To dismount the elliptical trainer, allow the pedals to
come to a complete stop. Note: The elliptical trainer
does not have a free wheel; the pedals will contin-
ue to move until the flywheel stops. When the ped-
als are stationary, step off the highest pedal first.
Then, step off the lowest pedal.
The handlebars are designed to add upper-body exer-
cise to your workouts. As you exercise, push and pull
the handlebars to work your arms, shoulders, and
back. To exercise only your lower body, hold the pulse
sensor as you exercise.
Pedal
Pedal
Disk
Pulse
Sensor
Handlebar
Wheel
Handlebar

9
The easy-to-use console offers a selection of features
designed to help you get the most from your workouts.
Follow the instructions below to operate the console.
Turn on the console.
Note: The console requires four 1.5V “D” batteries.
See assembly step 3 on page 5 for battery instal-
lation instructions.
Toturn on the console, press the On/Reset button
(see the drawing above to identify the On/Reset
button). Note: Moving the pedals is another way to
turn on the console.
Begin pedaling and change the resistance of
the pedals as desired.
As you pedal, change the resistance of the ped-
als by pressing the + and – buttons below the
large display. There are ten resistance levels—
level 10 is the most challenging. Note: After the
buttons are pressed, it will take a few seconds for
the resistance to reach the selected setting.
Follow your progress with the small display
and the large display.
The small display will
show your pedaling pace,
in revolutions per minute
(RPM). The indicator bar
in the small display will
increase or decrease in
length as you increase or
decrease your pedaling
pace. Note: When you
use the handgrip pulse
sensor,the small display will show your heart
rate (see step 4 on page 10).
The upper sec-
tion of the large
display will
show the dis-
tance you have
pedaled and the
numbers of
calories and fat calories you have
burned (see FAT BURNING on page 13 for an
explanation of fat calories). The display will
change from one number to the next every few
seconds.
3
2
1
Display Buttons
Fan Button
On/Reset Button
Resistance Buttons
HOW TO OPERATE THE CONSOLE
Indicator Bar

10
To view only the distance
you have pedaled or the
number of calories or fat
calories you have burned,
press the upper button on
the left side of the large
display until only the word
DISTANCE, CALORIES,
or FAT CALS appears in the upper section of the
large display; make sure that the word SCAN
does not appear. To again view the distance you
have pedaled and the numbers of calories and fat
calories you have burned, press the upper button
until the word SCAN reappears.
The centre of
the large dis-
play will show
the elapsed time
and your current
pace (pace is
shown in minutes per mile in this section of the
large display). The display will change from one
number to the other every few seconds.
To view only the elapsed
time or your pace, press
the centre button on the
left side of the large dis-
play until only the word
TIME or PACE appears;
make sure that the word
SCAN does not appear. To
again view both the elapsed time and your pace,
press the centre button until the word SCAN
reappears.
The lower sec-
tion of the large
display will show
your pedaling
speed and the
resistance level.
The display will change from one number to the
other every few seconds.
Toview only your pedaling
speed or the resistance
level, press the lower but-
ton on the left side of the
large display until only the
word SPEED or RESIS-
TANCE appears; make
sure that the word SCAN does not appear. To
again view both your pedaling speed and the
resistance level, press the lower button until the
word SCAN reappears.
To reset the displays, press the On/Reset button.
Note: The con-
sole can show
speed and dis-
tance in either
miles or kilome-
ters. The letters
MPH or KM/H will appear in the lower section of
the large display to show which unit of measure-
ment is selected. To change the unit of measure-
ment, hold down the On/Reset button for about six
seconds. Note: When the button is held down, the
fan will turn on for a moment. When the batteries
are replaced, it may be necessary to reselect the
desired unit of measurement.
Measure your heart rate if desired.
If there are thin
sheets of plas-
tic on the metal
contacts on the
handgrips, peel
off the plastic.
Touse the hand-
grip pulse sen-
sor, hold the
handgrips with
your palms resting against the metal contacts.
Avoid moving your hands.
When your pulse is
detected, the heart-
shaped indicator in the
small display will flash
each time your heart
beats. After a moment,
two dashes (– –) will
appear and then your
heart rate will be shown.
For the most accurate heart rate reading, continue
to hold the handgrips for about 30 seconds.
4
Upper Button
Centre Button
Lower Button
Metal
Contacts

11
Turn on the fan if desired.
To turn on the
fan at low
speed, press
the fan button.
To turn on the
fan at high
speed, press
the fan button a
second time. To
turn off the fan, press the fan button a third time.
Note: If the fan is turned on and the pedals are
not moved for about half a minute, the fan will
turn off to conserve the batteries.
Rotate the thumb wheel on the right side of the
console to pivot the fan to the desired angle.
When you are finished exercising, the console
will automatically turn off.
If the pedals are not moved for a few seconds,
the displays will pause and the time will flash in
the large display.
If the pedals are not moved and the console but-
tons are not pressed for a few minutes, the con-
sole will turn off to conserve the batteries.
6
5
Thumb
Wheel
Fan
Button

12
Inspect and properly tighten all parts of the elliptical
trainer regularly. Replace any worn parts immediately.
The elliptical trainer can be cleaned with a soft cloth
and a small amount of mild detergent. Do not use
abrasives or solvents. To prevent damage to the
console, keep liquids away from the console and keep
the console out of direct sunlight.
When storing the elliptical trainer, remove the batter-
ies from the console. Keep the elliptical trainer in a
clean, dry location, away from moisture and dust.
CONSOLE TROUBLESHOOTING
If the console does not function properly, replace the
batteries (see assembly step 3 on page 5).
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, first see assembly step 9 on page 7 and
remove the Pedals (13, 14). Next, see step 8 on page
7and remove the Pedal Arms (11, 12).
Next, remove all Screws (51, 72) from the right Pedal
Disc (15), and slide the Pedal Disc off. Remove all
Screws (71, 64) from the Right Side Shield (4), and
remove the Right Side Shield. Remove all Screws
(52) from the Left Side Shield (3) and remove the Left
Side Shield.
Next, locate
the Reed
Switch (53).
Loosen, but
do not
remove, the
indicated
Screw (52).
Slide the
Reed Switch
slightly toward
or away from
the Magnet (58) on the flywheel. Retighten the Screw.
Turn the left Pedal Disc (15) for a moment. Repeat
until the console displays correct feedback.
When the Reed Switch (53) is correctly adjusted, reat-
tach the Side Shields (3, 4), the right Pedal Disc (15),
the Pedal Arms (11, 12), and the Pedals (13, 14).
HOW TO ADJUST THE DRIVE BELT
If you can feel
the pedals slip
whilst you are
pedaling, even
when the resis-
tance is set at
the maximum
level, the Drive
Belt (19) may
need to be
adjusted. To
adjust the
Drive Belt, you
must remove both side shields. See the instructions at
the left and remove the side shields.
Next, loosen the M8 x 22mm Flat Head Bolt (26) and
turn the M10 x 60mm Screw (62) until the Drive Belt
(19) is tight. Once the Drive Belt is tight, tighten the
Flat Head Screw. Reattach the side shields.
MAINTENANCE AND TROUBLESHOOTING
64 71
51
51
72
71
52
52
64
64
14
12
4
58
53
52
15
15
3
26
62 19
64

13
CONDITIONING GUIDELINES
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition
and adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.
To find the proper heart rate for you, first find your age
at the bottom of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers above
your age. The three numbers are your “training zone.”
The lowest number is the recommended heart rate for
fat burning, the middle number is the recommended
heart rate for maximum fat burning, and the highest
number is the recommended heart rate for aerobic
exercise.
Fat Burning
To burn fat effectively, you must exercise at a relative-
ly low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible
carbohydrate calories for ener-
gy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy.
If your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is between the lowest
number and the middle number in your training zone
as you exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exer-
cise is activity that requires large amounts of oxygen
for prolonged periods of time. This increases the
demand on the heart to pump blood to the muscles,
and on the lungs to oxygenate the blood. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
WORKOUT GUIDELINES
Each workout should include the following three parts:
Awarm-up,consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in prepa-
ration for exercise.
Training zone exercise,consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone. Note: During the first few weeks of your exer-
cise program, do not keep your heart rate in your
training zone for longer than 20 minutes.
Acool-down,with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three work-
outs each week, with at least one day of rest between
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
desired. Remember,the key to success is make exer-
cise a regular and enjoyable part of your everyday life.
WARNING:
• Before beginning this or any exercise pro-
gram, consult your physician. This is espe-
cially important for persons over the age of
35 or persons with pre-existing health
problems.
• The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in deter-
mining heart rate trends in general.

14
PART LIST—Model No. PFEVEL29832 R0704A
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
11 Frame
2 1 Upright
31 Left Side Shield
4 1 Right Side Shield
5 2 Handlebar Arm
6 1 Left Handlebar
7 1 Idler Assembly
8 1 Right Handlebar
9 1 Rear Stabiliser
10 1 Front Stabiliser
11 1 Left Pedal Arm
12 1 Right Pedal Arm
13 1 Left Pedal
14 1 Right Pedal
15 2 Pedal Disc
16 2 Disc Crossbar
17 1 Flywheel
18 1 Side Shield Bracket
19 1 Drive Belt
20 2 Rear Endcap
21 2 Front Endcap
22 2 Wheel
23 1 Console
24 2 Handgrip
25 2M5 x 14mm Screw
26 1 M8 x 22mm Flat Head Screw
27 2 M10 x 76mm Button Bolt
28 4M6 Nylon Locknut
29 1 Resistance Motor
30 2Large Snap Ring
31 2 Large Bearing
32 1 Pedal Axle
33 7 M10 Nylon Locknut
34 4 M10 x 75mm Carriage Bolt
35 2 M8.5 Large Washer
36 6 M4 x 19mm Flange Screw
37 4 Pedal Arm Bushing
38 7 M8 Nylon Locknut
39 1 Large Flywheel Washer
40 2 Pedal Arm Bolt Set
41 2 M6 x 72mm Bolt
42 2 M4 x 22mm Screw
44 1 Upper Wire
45 2 M5 x 16mm Bolt
46 2 Handlebar Cap
47 2 Handlebar Spacer
48 2 Frame Spacer
49 6 Small Handlebar Arm Bushing
50 4 M8 x 45mm Button Bolt
51 4 M6 x 25mm Screw
52 14 M4 x 16mm Screw
53 1 Reed Switch/Wire
54 1 Cable Clamp
55 2 M8.5 Washer
56 2 M8 x 25mm Patch Screw
57 1 M10 Flat Head Bolt
58 1 Magnet
59 2 M10 Split Washer
60 4 Large Handlebar Arm Bushing
61 2 5/16” x 25.4mm Hex Bolt
62 1 M10 x 60mm Screw
63 1Bottle Holder
64 4 M4 x 25mm Screw
65 2Handlebar Endcaps
66 2 M5 Nylon Locknut
67 4 M5 Washer
68 1Small Flywheel Washer
69 2 M5 x 16mm Screw
70 1Lower Wire
71 2 M6 x 18mm Bolt
72 4 M6 x 28mm Screw
73 1 Pivot Axle
74 2 M3 x 12mm Screw
75 2 Wave Washer
# 1 TCD Cable
# 1 Hex Key
# 1 Grease
# 1 User’s Manual
Key No. Qty. Description Key No. Qty. Description

8
52
4
3
64
52
52
50
5
49
47
38
23
44
24
6
38
50
48
47
49
49
46
55
56
5
60
22
22
27
33
17
2
41
21 34
28
41 57
10 33
21 68
39
60
60
40
40 14
12 35
37
38
37 36
36
72
51
72
51
15
52
18
19
20
20
34
9
33
33
16
61
61
16
62
1
30 31
31 32 30
38
7
33
51
51
72 15
13
37
36 38 35
11
40
40
71
64
52
33
26
59
59
58
52
54
52
53
25
63
42
66
29
67
67
45
52
65
65
69
66
70
28
52
28
72
71
49
75
74
73
56
55
46
49
75
49 74
48
37
EXPLODED DRAWING—Model No. PFEVEL29832 R0704A
15

Part No. 213563 R704A Printed in China © 2004 ICON IP, Inc.
ORDERING REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4, Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Tel:
Outside the UK: 0 (044) 113 387 7133
Fax: [phone]
Tohelp us assist you, please be prepared to give the following information:
•the MODEL NUMBER of the product (PFEVEL29832)
• the NAME of the product (PROFORM 545 EKG elliptical trainer)
• the SERIAL NUMBER of the product (see the front cover of this manual)
•the KEY NUMBER and DESCRIPTION of the part(s) (see page 14)
08457 089 009
PROFORM is a registered trademark of ICON IP,Inc.