PROAIM P-GBD-01 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Gimbal-Bird Body Support Rig (P-GBD-01)
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
2 x Shoulder
2 x Belts
Jacket
2 x arms (Le And Right)

2
Gimbal Support Rig Setup
• Wear the jacket and fasten the buckles from
the waist.
• Now, fasten the buckle of the center strap of
the jacket.
• Follow the same process for the other Velcro
belt.
• Adjust the side Velcro belt of the vest as per
your comfort.
• You can use the buckle strap to loosen or
ghten the jacket.
• Loosen the knob present at the back of the
vest and have the vest sit on your shoulder
comfortably.

3
• Aach the shoulder strap to the chest sup-
port and follow the same procedure for the
other shoulder.
NOTE: A red knob at the back of the vest lets
you control the height and posioning of the
support bar and shoulder pad.
• Unlock the quick-release knob present on the
shoulder strap.
• The jacket would look like this aerwards.
• Now, fasten both shoulder strap buckles, as
shown in the image.
• Slide the provided arms on each shoulder
strap and lock the quick-release knob to se-
cure them.

4
• The jacket will look like this aerwards.
• Wrap the Velcro belt on the top mounng of
the handheld Gimbal (Not Included).
• Aach the other end of the Velcro belt with
the arm.
• Follow the same procedure to
aach the second Velcro belt to the
handheld Gimbal (Not Included).
• The Velcro belt will look like this when
securely wrapped around the top mounng.
• Follow the same procedure to aach the
second Velcro belt to the other arm.

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
YOUR PROAIM GIMBAL-BIRD BODY SUPPORT RIG
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
• Loosen and remove the quick-release plate
from the Handheld Gimbal (Not Included),
and then slide the Gimbal
(Not Included) to aach it to the Handheld
Gimbal (Not Included).
• Tighten the knob to secure it.
• The Gimbal (Not Included) is properly
aached to the camera (Not Included), as
shown in the image.