PROAIM VI-SPCM-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Spring-Cam Mitchell Vibraon Isolator (VI-SPCM-01)
Proaim Spring-cam Mitchell
vibraon Isolator
Mitchell Key
T– Type Allen Key
(4mm, 5mm, 5/16mm, 6mm)

2
• Remove the Male Mitchell ring from the
boom of the Spring-CAM Mitchell Vibraon
Isolator with the help of a Mitchell Key.
NOTE: The isolator oers great mounng
exibility with male Mitchell Mount.
Tripod (Not-Included) Setup
• Then mount the Spring-cam Mitchell
vibraon Isolator on the top of the Tripod
(Not Included) & ghten it with the help of
the Mitchell castle lock present at the boom
of the tripod.
• Manually ghten the Mitchell castle lock with
the help of the Mitchell key.
• Then insert the Mitchell Castle Nut with Ronin
Mount Clamp on Spring-cam Mitchell
vibraon Isolator and then ghten it with the
male Mitchell ring (Not Included) at the
boom of the Spring-cam Mitchell vibraon
Isolator.
• Then ghten it with the provided knob of the
DJI-QR Quick Release plate (Not Included).
• Remove the male Mitchell ring (Not Included)
from Mitchell Castle Nut with Ronin Mount
Clamp (Not Included).

3
• To secure the Camera (Not Included) with the
Gimbal (Not Included), lock it properly with
the lock lever of the gimbal, as shown in the
image.
• Push the buon of the gimbal (Not Included)
and place it on the DJI-QR Quick Release plate
(Not Included) by sliding it on the plate.
• Then ghten it with the knob of the DJI-QR
Quick Release plate (Not Included).
• Then properly ghten the male Mitchell ring
with the help of Mitchell Key.
• Remove the bolts of the Spring-cam Mitchell
vibraon Isolator with the help of the Allen
key, as shown in the image.
NOTE: It has 8 high-strength springs that absorb
ineral movements and supports a 5-50 kg /
11-110lb heavy payload. Also, you can use the
springs in dierent conguraons to precisely
achieve the li needed.
• Mount the Spring-cam Mitchell vibraon
Isolator on the mounng part of the Hi-Hat
and aach it with the male Mitchell ring.
Hi-Hat (Not-Included) Setup
Slider (Not-Included) Setup
Push Buon

4
• Then remove the spring of the Spring-cam
Mitchell vibraon Isolator.
NOTE: You can change the quanty of the
spring of the Spring-cam Mitchell vibraon
Isolator according to your requirement.
• Manually aach the male Mitchell ring at the
boom of the slider aer placing the
Spring-cam Mitchell vibraon Isolator on the
mounng part of the slider.
• Then insert the Mitchell Castle Nut
(Not Included) with Ronin Mount Clamp
from the top of the Spring-cam Mitchell
vibraon Isolator and ghten it with the
male Mitchell ring (Not Included) at the
boom of the Spring-cam Mitchell vibraon
Isolator.
YOUR PROAIM SPRING-CAM MITCHELL VIBRATION ISOLATOR
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.