PROAIM P-L4-SL User manual

Video Camera 4ft Line Slider
(P-L4-SL)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied by
the applicable copyright statutes or in wring by the Publisher.
I N S TR UC T I O N M A N UA L

Proaim Video Camera 4ft Line Slider 2
INTRODUCTION
Proaim 4ft Line Slider is specifically designed with versatility and simplicity in mind, allowing the
end user to maximize their creave potenal. It combines the most praccal industry features
and opons which makes it a versale slider. The slider allows your camera to have a smooth and
wobble-free sliding moon when mounted on tripod or placed on a table top. It can add precise
control to any camera to create a wide variety of stunning footage!
IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is
pictured and listed below.
ASSEMBLING YOUR VIDEO CAMERA LINE SLIDER
Aach the foots of both ends and adjust the foots as per your requirement.
Proaim 4ft Line Slider
Center Foot
End Foots Accessories

Proaim Video Camera 4ft Line Slider 3
Now push the side buon of Fluid Head and remove the Quick Release Plate and then Secure
your camera on Quick Release Plate with the help of screw driver.
Insert the Camera Setup on uid head and ghten the knob to secure it properly.
Now screw-in the uid head (Not Includ-
ed) onto the camera mounng plate of
the slider ghten the silver knob .

Proaim Video Camera 4ft Line Slider 4
Loosen the silver knob of camera plate completely and remove the camera plate from the
slider.
NOTE:
1. If you are having 1/4”-20 threaded uid head or camera then unscrew the 3/8”-16 screw from
the camera plate and screw in the 1/4”-20 screw .
2. If you would like to use heavy setup,
aach the third end foot in the center of
slider as shown.

Proaim Video Camera 4ft Line Slider 5
YOUR PROAIM VIDEO CAMERA 4FT LINE SLIDER
ALL DRESSED UP AND READY TO GO
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
(SHOWN WITH OPTIONAL ACCESSORIES)