PROAIM Victor Pro User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Victor Pro Video Producon Camera Cart (CT-VCTR-PRO-48)
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Lower Shelf
2 x Crossbars
2 x Hinge Handle
Allen key L– Type, 4 x Screws
Top Shelf
Carrying Handle
4 x Knobs

2
2 x Pneumac Tires Without
Break With Packing Pouch
2 x Pneumac Tires With
Break With Packing Pouch
Victor Pro Camera Cart Setup
• Open all the 4 locks which are on both sides
end of the cart.
• Unlock the re (With brake) by ipping the
knob.
4 x (31” Length) Rods With Packing
• Aer unlocking all locks, separate the upper
and lower shelf.
• Pull and ip the locking pin in upward direc-
on to open the locks.
NOTE: Two peoples are needed to assemble the cart.
Pneumac Tires With break

3
• The cart would look like this aer aaching
both the res (With break).
NOTE: To keep the cart in stac posion, lock
the wheels by pushing down the lever.
• Aach the unlocked re (With break) on
lower shelf’s dovetail bracket by sliding on it
as shown in the image.
• Flip the knobs to secure the aached re As
shown in image.
• Unlock the re (non break) by ipping the
knob.
• Aach the unlocked res (non break) on
lower shelf’s dovetail bracket by sliding as
shown in the image.
Pneumac Tires Without Break
• The cart would look like this aer aaching
both the res (non break).

4
• Tighten all the knobs provided at each corner
of the lower cart. So that all the rods are
properly aached to the cart as shown in the
image.
• Loosen the screw of the carrying handle with
the help of Allen key L-type as shown in im-
age.
• Now place the carrying handle on the side of
the boom shelf.
• Follow the same steps for all screw removal
before aaching it to lower shelf.
• Loose all the 4 knobs of lower shelf’s corner
hole and insert rod into it, as shown in image.
• Now, screw the carrying handle to lower shelf
with the help of allen key L-Type.
Rod
Carrying Handle

5
• Tighten all the 4 corner knobs of upper shelf
so that upper shelf doesn't fall down.
• Tighten knobs ghtly to set crossbar properly
on the rods.
• Now place the clamps of crossbar on rods, as
shown in image.
• Loosen the knob to open clamp of the cross-
bar.
• Now mount the upper shelf on the top of
the rods by aligning it in the corners.
• Follow same steps for all screws to check
whether they are properly set.
Upper Shelf
Crossbar

6
• Place handle clamp on the rod and adjust the
hinge handle accordingly.
• Follow same steps to aach second hinge
handle.
NOTE: It helps create the leverage needed while
liing the cart quickly over obstacles, stairs or
other incline surfaces.
• Follow the same step with second knob and
open the ap.
• Loosen the handle to open clamp of hinge
handle.
• Unlatch upper shelf’s ap by sliding the knob.
• The crossbar would look like this aer
aaching both clamps, as shown in image.
Hinge Handle

7
• The cart would look like this aer following all
the steps correctly.
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
YOUR PROAIM VICTOR PRO VIDEO PRODUCTION CAMERA CART
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)