Promate powerCase-S5 User manual

2100mAh Ultra-Slim
Power Case
User Guide

Thank you for purchasing powerCase-S5, an innovative gadget designed specifically
for the Samsung Galaxy S5 to provide an excellent protection and on the go additional
power efficiency at your fingertips. A slim-fit case with an attractive cutaway back
panel designed to protect your smartphone from accidental knocks and scratches
whilst discreetly hiding an additional back up battery. Just connect your smartphone
to powerCase-S5 to activate the charging system in which four LEDs allow you to
know in every moment of the day the right amount of energy remaining.
• powerCase-S5
• User Guide
• Battery Type: Lithium Polymer Battery
• Capacity: 2100 mAh
• Input: 5V-600mA
• Output: 5V-600mA
• Charging Time: 4 – 5 Hours
Introduction
Packaging Contents:
Specification:
1

Please read all safety instructions and warnings thoroughly before using this product.
Improper use of this product may result in damage to this or attached products.
1. Do not disassemble the case or attempt to fix it.
2. Do not attempt to replace any part of this case or battery inside
3. Do not crush, puncture, dispose of in fire, short the contacts or expose the
battery to water or other liquids.
4. Do not store or use the battery in a high temperature environment, including
intense sunlight or heat.
5. Avoid excessive drops, bumps, abrasions and impacts.
6. If there is any reason to believe that there is damage to the battery, discontinue
use immediately.
7. If you find that the battery is too hot, is emitting and odor is deformed,
punctured or exhibits any suspicious or abnormal behavior, discontinue use
immediately and contact our customer service.
8. Always charge this product before extended storage.
This case is designed to be used with Samsung Galaxy S5, please do not attempt to
use this product with any other device.
• Powerful 2100mAh Power case
• Slim fit case with back-up battery for charging and added power
• Charge your Samsung Galaxy S5 while secured and protected in the case
• Hard plastic case to securely hold your smartphone
• Smart LED charging and battery status indicator
• Short-circuit and over-current protection
Features:
Precautions:
Compatibility:
2

1. Micro-USB Input for Charging
2. LED Indicator
3. Micro-USB Charging Cable
Appearance & Interface Description:
3
3
2
1

Connect the Micro-USB end of the charging cable to powerCase-S5 and the
other end to a power adapter or computer USB port. powerCase-S5 will now
begin charging. During the charging process, the LEDs located on the bottom of
the device will blink to indicate your device has begun charging. When all the
four LEDs light up, PowerCase-S5 is fully charged.
Operation Instructions:
4
1. Charging powerCase-S5 without Samsung Galaxy S5 connected
Slide Samsung Galaxy S5 into PowerCase-S5. Connect the Micro-USB Output cable
to the input charging port on your smartphone. powerCase-S5 will automatically
begin charging your smartphone. The number of LED indicators active on the back
of powerCase-S5 indicate the current power left in the power case. Kindly follow
the table below to know the amount of power left in powerCase-S5.
2. Charging Samsung Galaxy S5 using PowerCase-S5
Number of
LED’s On
Power
Remaining
0
0%
1
<= 25%
2
<= 50%
3
<= 75%
4
<= 100%

3. Charging powerCase-S5 with Samsung Galaxy S5 connected :
Connect your Samsung Galaxy S5 to PowerCase-S5 through the attached
Micro-USB output cable and then connect the Micro-USB charging cable to the
charging port at the bottom of PowerCase-S5. Connect another end of the
charging cable to a power adapter or computer USB port. Your smartphone will
now begin charging. When your Samsung Galaxy S5 is fully charged, the backup
battery in PowerCase-S5 automatically starts getting charged. During the
charging process, the LEDs located on the bottom of the device will blink to
indicate your device has begun charging. When all the four LEDs light up,
PowerCase-S5 is fully charged.
5