promethean ActivPanel Elements Titanium V7 User manual

Promethean ActivPanel Elements Titanium Model V7
Power and Indicator Light buttons
How to tell if your panel is active, sleeping, or booting up:

Press and hold the power button to turn the panel off. Press the power button once to sleep or wake up. If you
don’t see any lights then the panel is not receiving power.
Freeze Screen button
This function allows you to freeze the image on the ActivPanel. When it is turned on, the image displayed will
remain fixed on the ActivPanel screen only, until the function has been turned off.
Using Freeze Screen will not affect the image on the computer screen connected to the ActivPanel nor the
computer mouse. You will still be able to use the mouse on the computer screen.
Touch inputs from the ActivPanel will still appear on the computer screen.
You will also find the Freeze Screen function on the ActivPanel remote control.
Freeze Touch button
This function allows you to disable the touch layer of the ActivPanel completely.
When it is enabled, the ActivPanel will no longer be interactive.
This does not freeze the image displayed on the ActivPanel, nor does it affect the computer mouse. You will
still be able to use the computer mouse and see it moving on the ActivPanel.
Source Selector button
Pressing this button once will show all available sources—HDMI is the computer and other sources could
include anything else that is plugged into your panel (external USB drive, etc.).