ProSoft PLX51-PBM User manual

PLX51-PBM Quick Start Guide
ProSoft Technology, Inc. Page 1 of 2
June, 2018 949-1014 v1.1
Note: Before installing, configuring, operating, or maintaining ProSoft Technology products, please review this information and
the information located on www.prosoft-technology.com for the latest software, documentation, and installation files specific to
your ProSoft Technology product.
Installation and maintenance of your ProSoft Technology product(s) should be carried out by suitably training personnel in
accordance with applicable codes of practice. In case of malfunction or damage, no attempts of repair should be made. Your
ProSoft Technology product(s) should be returned to the manufacturer for repair. Do not dismantle the product.
For professional users in the European Union
If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further
information.
WARNING –Cancer and reproductive harm –www.p65warnings.ca.gov
Your Feedback Please
We always want you to feel that you made the right decision to use our products. If you have suggestions, comments,
compliments or complaints about our products, documentation, or support, please write or call us.
ProSoft Technology, Inc.
[phone]
[phone] (Fax)
www.prosoft-technology.com
[email protected]
ProSoft Technology®, is a registered copyright of ProSoft Technology, Inc. All other brand or product names are or may be
trademarks of, and are used to identify products and services of, their respective owners.
Documentation is subject to change without notice.
North American Hazardous Location Approval
The following information applies when operating the product in hazardous locations:
THIS EQUIPMENT IS AN OPEN-TYPE DEVICE AND IS MEANT TO BE INSTALLED IN AN ENCLOSURE SUITABLE
FOR THE ENVIRONMENT SUCH THAT THE EQUIPMENT IS ONLY ACCESSIBLE WITH THE USE OF A TOOL.
SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D HAZARDOUS LOCATIONS, OR
NONHAZARDOUS LOCATIONS ONLY.
CET APPAREIL EST OUVERT UN DISPOSITIF DE TYPE ET EST DESTINE A ETRE INSTALLE DANS UNE
ENCEINTE ADAPTÉ POUR L'ENVIRONNEMENT TELS QUE L'ÉQUIPEMENT EST ACCESSIBLE SEULEMENT AVEC
L'UTILISATION D'UN OUTIL.
CONVIENT POUR UNE UTILISATION EN CLASSE I, DIVISION 2, GROUPES A, B, C ET D EMPLACEMENTS
DANGEREUX, OU EMPLACEMENTS NON DANGEREUX SEULEMENT.
Required Software
The PLX51-PBM requires the ProSoft PLX50 Configuration Utility to setup and configure. The software installation can be
found at: www.prosoft-technology.com

PLX51-PBM Quick Start Guide
ProSoft Technology, Inc. Page 2 of 2
June, 2018 949-1014 v1.1
Module Installation
The PLX51-PBM requires input power of 10 to 36 VDC. It communicates on both Ethernet and RS232/RS485. The module
provides a DIN rail clip to mount onto a 35mm DIN Rail.
PLX51-PBM Power Connector:
PLX51-PBM Auxilary Communication
Connector:
Ethernet Network Setup
The PLX51-PBM has DHCP enabled as factory default. Launch the DHCP server for the ProSoft PLX50 Configuration Utility to
assign an IP address to the module. The user can then configure the module with ProSoft PLX50 Configuration Utility.
Support, Service, and Warranty
Note: For technical support calls within the United States, ProSoft Technology’s 24/7 after-hours phone support is available
for urgent plant-down issues. Detailed contact information for all our worldwide locations is shown below:
Internet
Website: www.prosoft-technology.com/support
Email: [e-mail]
North America
Tel: [phone]
Email: [e-mail]
Languages spoken include: English, Spanish
Asia Pacific
Tel: [phone]
Email: [e-mail]
Languages spoken include: Bahasa, Chinese, English, Japanese, Korean
Europe / Middle East / Africa
Tel: [phone]
Email: [e-mail]
Languages spoken include: French, English
Mexico, Andean Countries, Central America,
Caribbean, Chile, Bolivia, Paraguay
Tel: [phone] or [phone]
Email: [e-mail]
Languages spoken include: Spanish, English
Brazil, Argentina, Uruguay
Tel: [phone]
Email: [e-mail]
Languages spoken include: Portuguese, English
For complete details regarding ProSoft Technology’s TERMS & CONDITIONS OF SALE, WARRANTY, SUPPORT, SERVICE
AND RETURN MATERIAL AUTHORIZATION INSTRUCTIONS, please see the documents at:
www.prosoft-technology.com/legal