protech prox BS-E099 User manual

Ver. Q1
All Rights Reserved. Copyright 2020
Packing Checklist
BS-E099
BS-E099 BS-E099
Specifications System View
Front View (Type 1)
Side View
50
218
C.L.75 (VESA)
C.L.75 (VESA)
140.6
Front View (Type 2)
Rear View
BS-E099
Quick
Reference
Guide
If you discover any item below damaged or lost,
please contact your vendor immediately.
BS-E099 x1
This Quick Reference Guide x1
Driver/ Manual DVD x1
Mini Jumper (2.0 mm) x2
Top View
System
CPU Intel®Kabylake U Series
Intel®Core™ i5-7300U
Intel®Core™ i3-7100U
Intel®Pentium®4415U
Memory Support 1 x DDR4 SO-DIMM sockets (up to 16GB)
Power Supply 4-pin ATX Power Input Connector (12V /19V / 24V)
Expansion Slots 1 x full-sized mSATA slot
1 x full-sized mPCIe
SATA 1 x SATAIII (6.0Gb/s)
Dimensions (WxHxD) 218 x 45 x 148mm
Weight Approx. 2kg
Operating System Windows 10 64bit / Ubuntu 16.04 64bit
Certifications FCC/CE
I/O Ports
Display 1 x DP (rear I/O) / 1 x HDMI (rear I/O)
USB For Core-i5 / i3 SKU:
2 x USB 2.0 (front I/O, option)
2 x USB 3.0 (rear I/O), 4 x USB 2.0 (rear I/O)
For Pentium SKU:
2 x USB 3.0 (rear I/O), 4 x USB 2.0 (rear I/O)
Serial Ports COM1 for RS-232
COM2 for RS-232/422/485 selectable under BIOS(default: RS-232)
COM3 /COM4 for RS-232, option
LAN 2 x GbE LANs
DIO Port 1 x DIO ( 8 in / 8 out), signal/power: 5V, option
Audio 3.5mm phone jack Line Out
Expansion Slots For Core-i5 / i3 SKU:
1 x full-sized mSATA slot (with USB signals)
1 x full-sized mPCIe slot (with SATA / USB signals)
For Pentium SKU:
1 x full-sized mSATA slot (with SATA signals only)
1 x full-sized mPCIe slot (with PCIe / USB signals)
I2C Port 1 x 4-pin I2C port, option
Environment
Operating Temp. 0°C ~ 60°C (32°F~140°F)
Storage Temp. -40°C ~ 80°C (-40°F~185°F)
Humidity 20% ~ 95%
Unit: mm
Power
Switch
(option)
COM2
DIO
COM3
(option)
COM4
Power LED
HDD LED
Power
Switch
COM2 USB
(option)
COM3
(option)
COM4
Power LED
HDD LED
DC In
COM1 HDMII2CLAN1
Line
Out
DP LAN2 USB

Jumper Setting
BS-E099
All Rights Reserved. Copyright 2020
Safety Precaution
Fanless Embedded PC with Intel®Kabylake-U Series SoC
JP9 V3P3 MPCIE Setting
VCC3_3
(default)
11
V3P3A
JP1 SPI Override Protection
Enable
1
JCMOS1 Clear CMOS Data
Selection
(default)
JP6 Backlight PWM Level
Selection
1
5V
3.3V
1
Disable
(default)
1
JP5 LVDS VCC Selection
1
1
Normal
(default)
1
Clear
CMOS
1
J1(DP+HDMI)
AUDIO1
LAN2 LAN1 USB1 USB2 USB3
JP9
1
JBAT1
1
1
JCMOS1
SATA1
1
JLVDS1
2
SW1
1
4
JP7
1 2
1
JFP1 JUSB1
1
2
1
2
1
JP1
CPU_
FAN1
1
ATX1
3
4
1
2
COM1
COM2
JP_COM2
6
9
6
DIMM1
M_PCIE1
M_SATA1
2
10 9
1
JDIO1
1
1
1
2
SPK_R_OUT1
JINV1
JI2C1
1
JP6
1
11
JP5
1
JHDD_
PWR1
Pins 1, 8: ON
Pins 2, 7: OFF
Pins 3, 6: ON
Pins 4, 5: ON
1024x768 /8bit (default)
SW1 LVDS Resolution
Selection
1
4
8
5
800x600 /6bit (default)
Pins 1, 8: ON
Pins 2, 7: ON
Pins 3, 6: ON
Pins 4, 5: ON
1
SPK_L_OUT1
1
JP_COM2 Port RI & Voltage
Selection
12V
RI
(default)
6
2
5
1 2
5V
6 5 6 5
212
12
2 1
(default) 5V
3.3V
CAUTION! Danger of explosion may occur if the battery is replaced incorrectly. Replace batteries only with the same or equivalent
type recommended by the manufacturer. Dispose the used batteries according to the manufacturer’s instructions.
The following messages are safety reminders on how to protect your system
from damages, and thus help you extend the life cycle of the system.
1. Check the Line Voltage
The operating voltage for the power supply should cover the range of
12V / 19V / 24V DC; otherwise, the system may be damaged.
2. Environmental Conditions
Place your BS-E099 on a sturdy, level surface. Be sure to allow
enough room on each side to have easy access.
Avoid moving the system rapidly from a hot place to a cold place or
vice versa because condensation may come from inside of the system.
Place BS-E099 against strong vibrations, which may cause hard disk
failure.
3. Handling
Do not turn the system upside down. This may cause the hard drive
to mal-function.
Do not allow foreign objects to fall into this product.
If water or other liquid spills into this product, unplug the power cord
immediately.
4. Good Care
When the outside of the case is stained, remove the stain with neutral
washing agent with a dry cloth.
If dust has been accumulated on the outside, remove it by using a
special made vacuum cleaner for computer.
CAUTION!
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries
accordingto the manufacturer’s instructions.
WARNING!
Some internal parts of the system may have high electrical voltage. Therefore we
strongly recommend qualified engineers open and disassemble the system.