Pulsar SG108 User manual

1
SG108
v1.2
SG108 10-ports switch for 8 IP cameras
Edition: 3 from 14.02.2019
Supercedes the edition: 2 from 17.09.2018 EN
Features:
Switch 10 ports
8 PoE ports 10/100/1000 Mb/s (data and power supply)
2 ports 10/100/1000 Mb/s (UP LINK)
30 W for each PoE port, supports devices complaint
with the IEEE802.3af/at (PoE+) standard
Supports auto-learning and auto-aging of MAC
addresses (8K size)
LED indication
The PSD52023052 V DC/2,3 A/120 W max.
power supply desktop type included
Additional assembly elements
warranty –2 year from the production date
Example of use.
1. Technical description.
1.1.General description.
SG108 is a 10-ports PoE switch designed to supply IP cameras operating in IEEE 802.3af/at standard.
Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 –8 ports of the switch. The UP LINK
ports is used for connection of another network device via RJ45 connector. The LEDs at the front panel indicate the operation
status (description in the table below).
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to supply a
separate power cable for each device. This method allows supplying other network devices, such as IP phone, wireless access
point or router.

2
1.2. Block diagram.
Fig. 1. Block diagram.
1.3. Description of components and connectors.
Table 1. (see Fig. 2)
Element no.
(Fig. 2)
Description
[1]
8 x PoE port (1÷8)
[2]
2 x UP LINK port
[3]
Power Socket of the DC
[4]
Additional assembly elements
Fig. 2. The view switch'a.

3
1.4.Technical parameters (table 2.)
Table 2.
Ports
10 ports 10/100/1000Mb/s (8 x PoE + 2 x UP LINK)
with connection speed auto-negotiation and MDI/MDIX Auto Cross
PoE power supply
IEEE 802.3af/at (1÷8 ports), 52 V DC / 30 W at each port *
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Bandwidth
16 Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply
Link
SPD
PoE Status
Power supply
~100-240 V; 50/60 Hz; 1,5 A
the PSD 520230 52V DC/2,3 A/120 W max. power supply desktop type
Operating conditions
temperature -10 °C ÷ 40 °C,
relative humidity 5 % - 90 %, no condensation
Dimensions
W=190, H=27, D=105 [+/- 2 mm]
Additional equipment
plate to be fixed surface
Net/gross weight
1,2/1,4 kg
Protection class
EN 60950-1:2007
II (second)
Storage temperature
-20 °C ÷ 60 °C
Declarations
CE
*The given value of 30 W per port is the maximum value. The total power consumption should not exceed 96 W.
2. Installation.
2.1. Requirements.
The unit should be mounted in confined spaces, in accordance with the 2nd environmental class, with normal
relative humidity (RH=90 % maximum, without condensation) and temperature from -10 °C to +40 °C. Ensure the free
flow of air around the unit. The PSU shall work in a vertical position that guarantees sufficient convectional air-flow
through ventilating holes of the enclosure.
The switch load balance should be done before installation. The given value of 30 W per port is the maximum value
referring to a single output. The total power consumption should not exceed 96 W. The increased demand for power is
particularly evident in the case of cameras with heaters or infrared illuminators - when launching these features, the
power consumption increases rapidly, which may adversely affect the operation of the switch. As the device is designed for
a continuous operation and is not equipped with a power-switch, therefore an appropriate overload protection in the power
supply circuit should be provided. The electrical system shall be made in accordance with applicable standards and regulations.
2.2. Installation procedure.
1. Connect switch to the PSD520230 52 V DC power supply unit desktop type.
2. Connect the power supply to the 230 V socket.
3. Connect the camera wires to the RJ45 connectors (connectors PoE).
4. Check the optical indication of switch operation (see Table 3).

4
Connection schemes

5
3. Operation indication (see table 3)
Table 3. Operation indication
OPTICAL INDICATION OF THE SWITCH's POWER SUPPLY
GREEN LED LIGHT (Power)
Indication of the switch's power
supply
OFF –no power supply of the switch
ON –power supply on, normal operation
OPTICAL INDICATION AT THE PoE PORTS (1÷8)
GREEN LED LIGHT (PoE)
Indication of the PoE power supply
at the RJ45 ports
OFF- no power supply at the RJ45 port (the device is not connected or not compliant with
the IEEE802.3af/at standard)
ON –power supply at the RJ45 port
Blinking –short-circuit or output overload
YELLOW LED LIGHT (LINK)
The connection status of LAN
devices, 10/100/1000 Mb/s
and data transmission
OFF- no connection
ON - the device is connected; 10/100/1000 Mb/s
Blinking –data transmission
OPTICAL INDICATION AT THE UP LINK PORTS
GREEN LED LIGHT
OFF- no connection / the device is connected 10 Mb/s or 100 Mb/s
ON - the device is connected 1000 Mb/s
YELLOW LED LIGHT (LINK)
The connection status of LAN
devices, 10/100/1000 Mb/s
and data transmission
OFF- no data transmission
ON - the device is connected 10/100/1000 Mb/s
Blinking –data transmission
WEEE LABEL
Waste electrical and electronic equipment must not be disposed of with normal household waste.
According to the European Union WEEE Directive, waste electrical and electronic equipment
should be disposed of separately from normal household waste.
Pulsar sp. j.
Siedlec 150, 32-744 Łapczyca, Poland
Tel. [phone], Fax. [phone]
e-mail: [email protected], sal[email protected]
http:// www.pulsar.pl, www.zasilacze.pl