Pulsar Axion 2 LRF XQ35 User manual

Axion 2 LRF
Manual

Content
About the device
Description
Package Contents
Features
Components and Controls
Specifications
Power supply
Battery Charging
Battery Installation
External Power Supply
Precautions
Recommendations for Use
Getting Started
Powering on and Image Setting
Button Operation
Interface
Status Bar
Quick Menu
Main Menu
Enter the Main Menu
Color Modes
Smoothing Filter
User Mode
Icon Brightness
PiP Mode
Wi-Fi Activation
Wi-Fi Settings
Microphone
Rangefinder
Calibration Mode
General Settings
Defective Pixel Repair

Defective Pixel Repair
Restore Default Pixel Map
Device Information
Functions
Amplification Level
Video Recording and Photography
Laser Rangefinder
Discrete Digital Zoom
PiP Function
Display-Off Function
Wi-Fi Function
Installing the Device on a Tripod
USB Connection
Software
Stream Vision 2
Firmware Update
Maintenance
Technical Inspection
Technical Maintenance and Storage
Troubleshooting
Legal Compliances and Disclaimers

Description
Axion 2 LRFthermal imaging monoculars are designed for use both at night-
time and during the day and provide exceptional image quality even in
adverse weather conditions (fog, smog, rain) and beyond obstacles like
branches, tall grass, dense foliage, etc. known to hinder target detection.
Unlike night-vision devices based on electron-optical converters, thermal
imaging devices do not need an external light source and are resistant to
bright light.
Axion 2 LRF thermal imagers are designed for various applications
including hunting, observation, security, terrain orientation, search and
rescue operations, etc.
Axion 2 LRF thermal imagers are equipped with a built-in laser rangefinder
with a range of up to 1000 m and a measurement accuracy of ± 1 m.
To get started, see the sections:
Battery Charging
Battery Installation
Powering on and Image Setting
Laser Rangefinder

Package Contents
Axion 2 LRF thermal monocular
APS 5 rechargeable battery
2 battery-locking covers
Power adapter
USB Type-C cable
Carrying case
Hand strap
Quick reference user manual
Lens cleaning cloth
Warranty information
Tripod adapter

Features
Compact and lightweight
Functional and ergonomic design
8-color display palette
3 calibration modes: Manual, Semi-Automatic, Automatic
Detection range up to 1300 m/1422 yds
Smooth digital zoom 2-8x
Three levels of sensitivity enhancement: Normal, High, Ultra
Integrated laser rangefinder
Display-Off function
Defective pixel repair
Updatable firmware
Wide operating temperature range (-25°С to +40°С / -13°F to +104°F)
Fully waterproof (IPX7 rated)
Tripod mount
Video/Audio Recording
Built-in video and sound recorder
Integration with iOS and Android devices
Wi-Fi remote control and viewing using a smartphone
Storing photos and videos in Cloud when using the Stream Vision 2 App
Battery Pack
Quick Change Li-Ion Battery Pack APS 5
Charging from USB Power Bank
Quick-Charge power delivery󰾬

Components and Controls

1. Eyepiece focus ring
2. LED indicator
3. DOWN/REC button
4. MENU button
5. UP/ZOOM button
6. Power ON/OFF/CALIBRATION button
7. Lens focus ring
8. Lens cover
9. Tripod adapter socket
10. USB Type-C connector

11. Laser rangefinder
12. LRF button
LED indicator (2) displays the current status of the device:
LED Indicator Operating Mode
Device is turned on
The device is turned on/video
recording
The device is turned on/battery
charge < 10%
The device is turned on/video
recording/battery charge <
10%

Specifications
LRF XQ35
Model LRF XQ35
SKU 77479
Microbolometer 
Type uncooled
Resolution, Pixels 384x288
Pixel Pitch, µm 17
Frame Rate, Hz 50
Optical Characteristics 
Optical Magnification, x 2
Smooth Digital Zoom 2-8
Digital Zoom, x x1, x2, x4
Lens Focus, mm 35
Relative Aperture, D/f' 1.0
Minimum Focus Distance, m/y 5 / 5.47
Eye Relief Diameter, mm/inch 4 / 0.16
Angular Field of View
(Horizontal x Vertical), degree 10.7х8
Linear Field of View, m at 100
m18.2
Eyepiece Focus Range, Diopter +4 / -5
Detection Distance for Deer-
Sized Objects, m/y 1300/1422
Display 

Type AMOLED
Resolution, Pixels 640x400
Operational Characteristics 
Power Supply, V 3 - 4.2
Battery Type/Capacity/Nominal
Output Voltage APS 5 Li-ion Battery Pack / 4900 mAh / DC 3.7 V
External Power Supply 5 V, 9 V (USB Type-C)
Battery Run Time at t=22°C,
hours* 11
Degree of Protection, IP Code
(IEC60529) IPX7
Operating Temperature Range,
°C -25 to +40
Dimensions, mm/inch 152x74x75 / 5.98x2.91x2.95
Weight (without battery), kg/oz 0.35 / 12.34
Video Recorder 
Photo/Video Resolution, Pixels 528x400
Video/Photo Format .mp4 / .jpg
Built-in Memory 16 GB
Wi-Fi Channel** 
Frequency 2.4/5 GHz
Standard IEEE 802.11 b/g/n/ac
Characteristics of the
Rangefinder 
Wavelength, nm 905
Measurement Range, m/y*** 1000/1094
Measurement Accuracy, m 1

* Actual battery life may vary depending on the use of Wi-Fi and the built-in
video recorder.
** Reception range may vary depending on various factors: obstacles, other
Wi-Fi networks.
*** Depends on the characteristics of the object under observation and
environmental conditions.

Battery Charging
The Axion 2 LRFthermal imager comes with an APS 5 rechargeable Lithium-
ion battery. APS 5 batteries support USB Power Delivery fast charging
technology when using a standard charging set (charger*, USB Type-C
cable, power adapter). Before first use, make sure the battery is fully
charged.
Option 1

Image not found or type unknown

Image not found or type unknown

1. Install the APS 5 battery (15) in the battery compartment (14) of the
device.
2. Connect the USB cable (19) to the USB Type-C connector (9) of the
device.
3. Connect the other end of the USB cable (19) to the Power Adapter
(20).
4. Plug the Power Adapter (20) into a 100-240 V socket.
5. Wait until the battery is fully charged (indication in the status bar:
Image not found or type unknown
).

Option 2

Image not found or type unknown


1. Insert the APS 5 battery (15) along the guide into the APS 5 charger*
(16) slot as far as it will go.
2. Connect the plug of the USB Type-C cable (19) to the USB Type-C
connector of the Power Adapter(20).
3. Plug the Power Adapter (20) into a 100-240 V socket.
4. Connect the other end of the USB Type-C cable (19) to the USB Type-C
connector (17)of the charger.
5. LED indicators (18) will display the battery charge level (see Table).

6. Wait until the battery is fully charged (LED indication (18):
).
Note: Two batteries can be charged at the same time, a second slot is
provided for it.
LED indication (18) in the
battery charging mode Battery Level
Battery charge level is from
0% to 25%
Battery charge level is from
26% to 50%
Battery charge level is from
51% to 80%
Battery charge level is from
81% to 99%
Battery is fully charged. It can
be disconnected from the
charger.
Defective battery. Do not use
the battery!
LED indication (18) in the
standby mode** Battery Level
Battery charge level is from
0% to 25%
Battery charge level is from
26% to 50%
Battery charge level is from
51% to 80%
Battery charge level is from
81% to 99%