PULSEEIGHT P8-HDMIDAC User manual

P8-HDMIDAC
QUICK SETUP GUIDE
Audio Selector Two setting audio mode
selector switch.
Video Selector Three setting video mode
selector switch.
HDMI Input Connect a HDMI source device
(i.e Blu-Ray player) to this port using a HDMI
cable (not supplied).
HDMI Output Connect to HDMI sink device
(i.e TV) to this port using a HDMI cable (not
supplied).
Stereo Output 3.5mm audio breakout
Power Indicator This LED will indicate when
the device is correctly powered
Power Use the supplied mains power cable and
connect to the device. Do not use any other power
cables with this product.
A
D
E
F
G
B
C
B
E G
C
F
A
D

COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means (electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise) without express
written permission and consent from Pulse-Eight Limited.
© Copyright 2019 Pulse-Eight Limited. All Rights Reserved.
Version 1.0 - August 2019
Pulse-Eight Limited
8-12 Alder Hills . Poole . Dorset . BH12 4AL . UK
[e-mail] | [phone]
www.pulse-eight.com
INITIAL SETUP
1CONNECT INPUT DEVICE
Using the ‘HDMI Input’ port, connect to the source device
(i.e Blu-Ray player) using a HDMI cable (not supplied).
2CONNECT OUTPUT DEVICES
Using the ‘HDMI Output’ port, connect your sink device (i.e
TV) using a HDMI cable (not supplied).
3MOVE THE SCALER
If you are sending a 4K Picture from your source device to
a 1080p Sink device (i.e not 4K) slide the Video slider to
‘Downscale’. This also works in reverse if you are sending a
picture from your 1080p source to a 4K Sink, you can slide
it to ‘Upscale’ (please note in order to get a 4K picture you
will need a HDMI cable 2.0, cables not included).
4STEREO OUT
The HDMI will carry the audio signal, however the HDMI
DAC comes with the option to output sound to a Soundbar
or another audio output should you wish to route your
Audio direct from the DAC rather than the display to the
DAC (cables not included)
5CONNECT POWER
Use the supplied power supply and connect to DC 5V port.
PLEASE NOTE: HDMI DAC does not support downscaling for Sky Q 2TB
or Virgin V6 4K content - please use the HDMI UHD 18Gbps Downscaler
(P8-HDMI2-4KDS)
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio and the double-D
symbol are trademarks of Dolby Laboratories.